Our metaphors matter. When we are in the throes of a busy schedule, our culture encourages us to “crank it out” in order that we might emulate the hard worker who remains steadfast “like a machine”. We are encouraged to “recharge” with enough sleep and “fuel up” with caloric intake only so that we can be all the more efficient the next day. The problem with this metaphor is obvious: We are, in fact, not machines. Embodied creaturely life is organic, not mechanical. In this episode, Joshua and Mike remind us that our work should be aiming for “fruitfulness”, not efficiency, because all good work has latent within it the seeds of further fruit.

64 – “Fruitful Seasons of Work”

In this final episode of their tour through David Pye’s The Nature and Art of Workmanship, Joshua and Mike bring up several of their critiques of Pye’s thought. As helpful and insightful as he was, the guys both are left feeling like something was missing. See how this book comes up short of a full-orbed, holistic discussion of workmanship and it’s enduring value in a technological age.

63 – A Critique of David Pye

Joshua and Mike have finally arrived at the final chapter of David Pye’s The Nature and Art of Workmanship, and it has been quite a ride. What did Pye see as the future of craftsmanship from his vantage point in 1968? Was he right? Is his assessment still valid in 2023? Listen in to this final installment to find out.

62 – “The Aesthetic Importance of Workmanship, and its Future” Pye Ch 11

“Handmade” does not mean “shoddy.” This latest episode of the David Pye mini-series tackles chapter 10 of The Nature and Art of Workmanship in which Pye takes John Ruskin to task for his sloppy reasoning about workmanship. Pye’s motivation in writing his book was to critique the “illegitimate extensions” of Ruskin’s ideas about art and pleasure in work. He believed that a more precise analysis would clear up this muddy thinking so that the crafts could be recovered and dignified once again.

61 – “Critique of ‘On the Nature of Gothic’” Pye Ch 10

OK… that’s an ambiguous title. But, be assured that the guys recorded this episode to make it all come clear. In this next installment, Joshua and Mike expound Chapter 9 of David Pye’s The Nature and Art of Workmanship. This chapter is the culmination of his argument about why surface qualities are so important. Get ready to dive into the weeds – no aspect of craftwork is too small to consider carefully.

60 – “Equivocality” Pye Ch 9

Another installment of the “Nature and Art of Workmanship” podcast series. Chapter eight deals with the subject of “durability.” Does precision mean durability in all circumstances? Who’s “to blame” when a product fails: the designer or the craftsman? All these questions and more are addressed in this episode.

59 – “Durability” Pye Ch 8

In this episode, Joshua and Mike pick up where they left off with David’s Pye classic discussion about the value of craftsmanship in a mechanized age: The Nature and Art of Workmanship. This chapter explains that diversity is essential in design and that the artisan’s handwork “picks up where design leaves off” to give us that lively tactile quality that we appreciate at the close proximity of daily use.

58 – “Diversity” Pye Ch 7

Another installment in the Nature and Art of Workmanship series. This time Joshua and Mike walk through chapter six which compares human creativity to the natural world. Regulated work was coveted in ancient cultures because they were surrounded by nature. In our industrial culture, however, we need the liveliness and idiosyncrasy of handwork.

57 – “The Natural Order Reflected in the Work of Man” Pye Ch 6

Another installment in the Nature and Art of Workmanship series. This time Joshua and Mike discuss the fifth chapter which shows the limits of design. Much of the success is left to the workman.

56 – “The Designer’s Power to Communicate His Intentions” Pye Ch 5

In this episode, the guys dive right into the heart of Pye’s vision in this book: identifying and appreciating various qualities of workmanship. This is the longest and most detailed chapter in the book but skimming past it guarantees you’ll miss his point.

55 – “Quality in Workmanship” Pye Ch 4

Great hosts, positive attitudes, exceptional show!

Exceptional

Great podcast for all woodworkers. This podcast mirrors the magazine.

A must for woodworkers

The Mortise & Tenon Podcast

This episode is all about filling you in on our incredibly intense summer. Between the workshop with our six students, Issue Seven shipping out, and our hand-tool-only timber frame blacksmith shop, we’ve been out straight busy. Also, in this episode, meet Grace, our new team member. You’ll hear our enthusiasm for the whirlwind of events that happened as well as the new projects we’re working to wrap up now! A new book, a documentary film, and another apprenticeship video all on the horizon!

15 – Workshop, Timber Frame, and Issue Seven

This time, Mike and I tackled one of the most common discussions we have with readers: how to get started on the hand-tool route. What change of mindset is needed to make the switch from power tools to hand tools? Should we be cutting practice joints? What are the biggest hurdles we encounter on this journey? We hope this episode is an encouragement to you to get into the shop to work with your hands. Have further questions? Leave us a comment and we’d love to help. Thanks for listening!

03 - Beginning Your Hand-tool Journey

We had lots to talk about today. On the magazine front, pre-orders for Issue Four opened yesterday, and we’ve been releasing the Table of Contents for the past two weeks leading up to the big event. We talk about our soon-to-be-released t-shirt design, commissioned from artist Jessica Roux. In our discussion, we go over the ins and outs of setting up a workshop specifically based around the use of hand tools. We consider decisions to be made around lighting, heat, and tool storage, along with details from period shops that might inform the way we approach this task today.

06 - Setting Up a Hand-tool Workshop

Episode 4 of our podcast is centered around sourcing lumber for furniture making. In reality, Mike and I both source our wood from all sorts of places. We harvest our own from the woods, use a lot of salvaged material, and also order from lumberyards. In our discussion, we go over the best way to store lumber for air drying (it’s simpler than you think).

04 - Sourcing Lumber

This episode of our podcast was recorded on the road yesterday as we headed back home from Portland, Maine. Fortified by delicious caffeine after a whole day of weaving rush seats, we reported on a number of research trips we’ve made in the past few weeks. We were given the opportunity to look deeply into an extensive collection of early 19th-century furniture and document their construction, and we share about the experience in this episode. Also, we discuss our visit into the workshop of Peter Lamb. Peter has a massive collection of antique tools and many of them have stories connected to people he’s close to. His philosophy of handcraft, creativity, and social justice is rooted in his relationship to his dear friend, Bill Coperthwaite, who has been a big inspiration to both of us.We also discuss the articles we’re working on for Issue Seven, and talk about the upcoming worksong event we signed up for, which will be led by worksong researcher and performer, Bennett Konesni.Oh, and we got cut off by a Jeep during the recording.

This episode of our podcast was recorded on the road yesterday as we headed back home from Portland, Maine. Fortified by delicious caffeine after a whole day of weaving rush seats, we reported on a number of research trips we’ve made in the past few weeks. We were given the opportunity to look deeply into an extensive collection of early 19th-century furniture and document their construction, and we share about the experience in this episode. Also, we discuss our visit into the workshop of Peter Lamb. Peter has a massive collection of antique tools and many of them have stories connected to people he’s close to. His philosophy of handcraft, creativity, and social justice is rooted in his relationship to his dear friend, Bill Coperthwaite, who has been a big inspiration to both of us. We also discuss the articles we’re working on for Issue Seven, and talk about the upcoming worksong event we signed up for, which will be led by worksong researcher and performer, Bennett Konesni. Oh, and we got cut off by a Jeep during the recording.

14 - Tool Marks Tell Stories

In this episode of our podcast, Mike and I discuss our handmade Christmas gifts. This time of the year is a great excuse to get into the shop. We’ve been making gifts for years, and there are many ideas one could try out. We spent this episode discussing several of our projects in order give you ideas for the next gift you give.Handmade gifts are a special thing. It is not an easy to commit to making gifts instead of buying them, but it is rewarding to invest yourself in something that will mean so much to those you love.

In this episode of our podcast, Mike and I discuss our handmade Christmas gifts. This time of the year is a great excuse to get into the shop. We’ve been making gifts for years, and there are many ideas one could try out. We spent this episode discussing several of our projects in order give you ideas for the next gift you give. Handmade gifts are a special thing. It is not an easy to commit to making gifts instead of buying them, but it is rewarding to invest yourself in something that will mean so much to those you love.

16 – A Handmade Christmas

This new episode of our podcast was recorded after two weeks of traveling to meet inspiring craftspeople of many different specialties. Mike and I share some of what we learned on our trips and discuss how learning hand skills is essential to surviving in a hyper-consumerist culture. Joshua also discusses his recent explorations into a pragmatic approach to wooden planemaking.

08 - A New (Old) Way of Working Wood

In this installment of the podcast, Joshua and I discuss the newly released video documentary and book that share the same name – "Another Work Is Possible." Both of these resources detail the timber-frame project that took place here at our headquarters in Sedgwick, Maine last August. Thirty five international carpenters brought their axes to hew and raise a frame for a blacksmith shop over 8 days. But this project was about so much more than simply putting up a building. We cover many of the concepts that Joshua writes about in his book – the idea that manual work can be enjoyed and celebrated, rather than seen as drudgery, and that building with your own two hands (whether it be a piece of furniture, a spoon, or a building) carries with it a deeply human sense of satisfaction. Another work is actually possible – one that engages with the raw materials and the world around us in a profound way.

In this installment of the podcast, Joshua and I discuss the newly released video documentary and book that share the same name – "Another Work Is Possible." Both of these resources detail the timber-frame project that took place here at our headquarters in Sedgwick, Maine last August. Thirty five international carpenters brought their axes to hew and raise a frame for a blacksmith shop over 8 days. But this project was about so much more than simply putting up a building. We cover many of the concepts that Joshua writes about in his book – the idea that manual work can be enjoyed and celebrated, rather than seen as drudgery, and that building with your own two hands (whether it be a piece of furniture, a spoon, or a building) carries with it a deeply human sense of satisfaction. Another work is actually possible – one that engages with the raw materials and the world around us in a profound way.

17 – Another Work is Possible

Ben Strano

This episode of our podcast is the first to feature a guest. Since our friend, Ben Strano of Fine Woodworking, was up in our neck of the woods this week, we invited him to join us in a discussion about the importance of hand skills and making things with personal meaning. And because Ben is not only a passionate woodworker, but he is a tech-nut, we also discussed how both print and digital media support those two vital things for this next generation of woodworkers. Ben describes his work behind the scenes at Fine Woodworking and tells us about what it’s like working with the woodworkers he looks up to most.Photo credit: Ben Strano

This episode of our podcast is the first to feature a guest. Since our friend, Ben Strano of Fine Woodworking, was up in our neck of the woods this week, we invited him to join us in a discussion about the importance of hand skills and making things with personal meaning. And because Ben is not only a passionate woodworker, but he is a tech-nut, we also discussed how both print and digital media support those two vital things for this next generation of woodworkers. Ben describes his work behind the scenes at Fine Woodworking and tells us about what it’s like working with the woodworkers he looks up to most. Photo credit: Ben Strano

05 - Why Make Things with Your Hands featuring Ben Strano

Ever wonder what ancient tool marks, a Swedish chair shop, Söetsu Yanagi, computer coders, spoon carving, philosophers, and communal singing have in common? This podcast episode ties them all together as we discuss Joshua’s recent talk at Fine Woodworking Live, in which he made a case for sweaty, gritty, hand-tool-only furniture making in the 21st-century. Built on excerpts from the talk itself, we look at this presentation point-by-point. If you spend large amounts of time in front of screens and are dying to discover something tangible, this podcast is for you.

13 - The Case for Hand Tools at Fine Woodworking Live

The best podcast episodes on romantic relationships. Episodes talk about the 5 love languages, intimacy, and the taboo topics of sexual desires and infidelity. This topic is a deep dive into the science and complexities that face us in our relationships with others. Add episodes you're interested into your queue below!

Best Episodes on Relationships & Love

The best podcast episodes of anyone with an interesting story. With famous guests like Obama, LeBron James, Drake, Oprah Winfrey, Richard Branson, Michelle Obama, Serena Williams, to anyone who has a unique and interesting story to tell. Add episodes you're interested into your queue below!