Thank you for listening to episode 274 of the Welding Tips and Tricks Podcast!  This week we're talking about Tungsten Angles.  We asked for topic ideas on Instagram last week and this was one of the many replies we received.  We go all over the place with this topic but really cover a lot of ground.  Hope it helps!  Have a great week and if you enjoy the show please subscribe on your favorite podcast apps and also share the show with others!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!       Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&amp;N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&amp;S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.       This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Thank you for listening to episode 274 of the Welding Tips and Tricks Podcast!  This week we're talking about Tungsten Angles.  We asked for topic ideas on Instagram last week and this was one of the many replies we received.  We go all over the place with this topic but really cover a lot of ground.  Hope it helps!  Have a great week and if you enjoy the show please subscribe on your favorite podcast apps and also share the show with others!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to <a href="https://www.patreon.com/Weldingtipsandtrickspodcast" rel="nofollow" target="_blank">www.patreon.com/weldingtipsandtrickspodcast</a>. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&amp;N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&amp;S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.     Where Can You Find the Welding Tips and Tricks Forum?   <a href="https://forum.weldingtipsandtricks.com/" rel="nofollow" target="_blank">Welding Tips and Tricks Forum</a>   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           <a href="http://www.weldingtipsandtricks.com/" rel="nofollow" target="_blank">http://www.weldingtipsandtricks.com/</a>                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     <a href="http://www.superiorweldandfab.com/" rel="nofollow" target="_blank">http://www.superiorweldandfab.com/</a>                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        <a href="http://www.crummywelding.com/" rel="nofollow" target="_blank">http://www.crummywelding.com/</a>                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to <a href="http://superiorweldandfabsupply.com" rel="nofollow" target="_blank">superiorweldandfabsupply.com</a> to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link <a href="http://weldmongerstore.com/" rel="nofollow" target="_blank">http://weldmongerstore.com</a>/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Tungsten Angles 

Thank you for listening to episode 273 of the Welding Tips and Tricks Podcast!  This week we're talking about product development!  All three of us have developed a product of some kind and brought it to a small market.  We thought it would be fun to talk about some of the experiences we've had during that time and hope this conversation might spark a fire in you to bring your idea for a product to life!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!       Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&amp;N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&amp;S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.       This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Thank you for listening to episode 273 of the Welding Tips and Tricks Podcast!  This week we're talking about product development!  All three of us have developed a product of some kind and brought it to a small market.  We thought it would be fun to talk about some of the experiences we've had during that time and hope this conversation might spark a fire in you to bring your idea for a product to life!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to <a href="https://www.patreon.com/Weldingtipsandtrickspodcast" rel="nofollow" target="_blank">www.patreon.com/weldingtipsandtrickspodcast</a>. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&amp;N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&amp;S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.     Where Can You Find the Welding Tips and Tricks Forum?   <a href="https://forum.weldingtipsandtricks.com/" rel="nofollow" target="_blank">Welding Tips and Tricks Forum</a>   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           <a href="http://www.weldingtipsandtricks.com/" rel="nofollow" target="_blank">http://www.weldingtipsandtricks.com/</a>                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     <a href="http://www.superiorweldandfab.com/" rel="nofollow" target="_blank">http://www.superiorweldandfab.com/</a>                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        <a href="http://www.crummywelding.com/" rel="nofollow" target="_blank">http://www.crummywelding.com/</a>                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to <a href="http://superiorweldandfabsupply.com" rel="nofollow" target="_blank">superiorweldandfabsupply.com</a> to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link <a href="http://weldmongerstore.com/" rel="nofollow" target="_blank">http://weldmongerstore.com</a>/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Product Development 

Thanks for listening to the Welding Tips and Tricks Podcast!  For this week's guest we had Aaron Biefer better known as @Bulldogwelding on Instagram!  Aaron has been a good friend of ours for a long time but we've never really known what he did for his day gig, until now!  We hope you enjoy this chat with Aaron and have a great week!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!       Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&amp;N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&amp;S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.       This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Thanks for listening to the Welding Tips and Tricks Podcast!  For this week's guest we had Aaron Biefer better known as @Bulldogwelding on Instagram!  Aaron has been a good friend of ours for a long time but we've never really known what he did for his day gig, until now!  We hope you enjoy this chat with Aaron and have a great week!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to <a href="https://www.patreon.com/Weldingtipsandtrickspodcast" rel="nofollow" target="_blank">www.patreon.com/weldingtipsandtrickspodcast</a>. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&amp;N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&amp;S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.     Where Can You Find the Welding Tips and Tricks Forum?   <a href="https://forum.weldingtipsandtricks.com/" rel="nofollow" target="_blank">Welding Tips and Tricks Forum</a>   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           <a href="http://www.weldingtipsandtricks.com/" rel="nofollow" target="_blank">http://www.weldingtipsandtricks.com/</a>                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     <a href="http://www.superiorweldandfab.com/" rel="nofollow" target="_blank">http://www.superiorweldandfab.com/</a>                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        <a href="http://www.crummywelding.com/" rel="nofollow" target="_blank">http://www.crummywelding.com/</a>                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to <a href="http://superiorweldandfabsupply.com" rel="nofollow" target="_blank">superiorweldandfabsupply.com</a> to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link <a href="http://weldmongerstore.com/" rel="nofollow" target="_blank">http://weldmongerstore.com</a>/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Bulldog Welding  Aaron Biefer 

Thank you for listening to episode 271 of the Welding Tips and Tricks Podcast!  This week we're talking about Stick Rods!  Jody had recently posted a video on YouTube about different stick rods and we thought we could continue the conversation and see where it went.  Hope you can pick out a few good nuggets to help you along your way!  Have a great week everyone!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!       Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&amp;N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&amp;S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.       This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Thank you for listening to episode 271 of the Welding Tips and Tricks Podcast!  This week we're talking about Stick Rods!  Jody had recently posted a video on YouTube about different stick rods and we thought we could continue the conversation and see where it went.  Hope you can pick out a few good nuggets to help you along your way!  Have a great week everyone!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to <a href="https://www.patreon.com/Weldingtipsandtrickspodcast" rel="nofollow" target="_blank">www.patreon.com/weldingtipsandtrickspodcast</a>. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&amp;N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&amp;S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.     Where Can You Find the Welding Tips and Tricks Forum?   <a href="https://forum.weldingtipsandtricks.com/" rel="nofollow" target="_blank">Welding Tips and Tricks Forum</a>   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           <a href="http://www.weldingtipsandtricks.com/" rel="nofollow" target="_blank">http://www.weldingtipsandtricks.com/</a>                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     <a href="http://www.superiorweldandfab.com/" rel="nofollow" target="_blank">http://www.superiorweldandfab.com/</a>                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        <a href="http://www.crummywelding.com/" rel="nofollow" target="_blank">http://www.crummywelding.com/</a>                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to <a href="http://superiorweldandfabsupply.com" rel="nofollow" target="_blank">superiorweldandfabsupply.com</a> to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link <a href="http://weldmongerstore.com/" rel="nofollow" target="_blank">http://weldmongerstore.com</a>/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Stick Rods

Thank you for listening to episode 270 of the Welding Tips and Tricks Podcast!  This week we had a fun chat with Mike Best from @bestfabllc on Instagram.  Mike has an interesting story on how he got into welding and started his own business.  Also, how he met Jody for the first time.  We hope you can pull a few nuggets out of this episode to help you along the way!  Have a great week!      If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!       Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&amp;N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&amp;S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.       This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Thank you for listening to episode 270 of the Welding Tips and Tricks Podcast!  This week we had a fun chat with Mike Best from @bestfabllc on Instagram.  Mike has an interesting story on how he got into welding and started his own business.  Also, how he met Jody for the first time.  We hope you can pull a few nuggets out of this episode to help you along the way!  Have a great week!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to <a href="https://www.patreon.com/Weldingtipsandtrickspodcast" rel="nofollow" target="_blank">www.patreon.com/weldingtipsandtrickspodcast</a>. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&amp;N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&amp;S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.     Where Can You Find the Welding Tips and Tricks Forum?   <a href="https://forum.weldingtipsandtricks.com/" rel="nofollow" target="_blank">Welding Tips and Tricks Forum</a>   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           <a href="http://www.weldingtipsandtricks.com/" rel="nofollow" target="_blank">http://www.weldingtipsandtricks.com/</a>                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     <a href="http://www.superiorweldandfab.com/" rel="nofollow" target="_blank">http://www.superiorweldandfab.com/</a>                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        <a href="http://www.crummywelding.com/" rel="nofollow" target="_blank">http://www.crummywelding.com/</a>                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to <a href="http://superiorweldandfabsupply.com" rel="nofollow" target="_blank">superiorweldandfabsupply.com</a> to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link <a href="http://weldmongerstore.com/" rel="nofollow" target="_blank">http://weldmongerstore.com</a>/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Mike Best 

Thank you for listening to episode 269 of the Welding Tips and Tricks Podcast!  For this week's chat we're talking about upgrading your shop.  What kinds of things can you do and when is a good time to do the upgrades.  Jonathan is right in the middle of doing such things so we thought this would be a good time for this conversation.  Have a great week!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!       Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&amp;N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&amp;S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.       This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Thank you for listening to episode 269 of the Welding Tips and Tricks Podcast!  For this week's chat we're talking about upgrading your shop.  What kinds of things can you do and when is a good time to do the upgrades.  Jonathan is right in the middle of doing such things so we thought this would be a good time for this conversation.  Have a great week!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to <a href="https://www.patreon.com/Weldingtipsandtrickspodcast" rel="nofollow" target="_blank">www.patreon.com/weldingtipsandtrickspodcast</a>. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&amp;N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&amp;S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.     Where Can You Find the Welding Tips and Tricks Forum?   <a href="https://forum.weldingtipsandtricks.com/" rel="nofollow" target="_blank">Welding Tips and Tricks Forum</a>   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           <a href="http://www.weldingtipsandtricks.com/" rel="nofollow" target="_blank">http://www.weldingtipsandtricks.com/</a>                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     <a href="http://www.superiorweldandfab.com/" rel="nofollow" target="_blank">http://www.superiorweldandfab.com/</a>                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        <a href="http://www.crummywelding.com/" rel="nofollow" target="_blank">http://www.crummywelding.com/</a>                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to <a href="http://superiorweldandfabsupply.com" rel="nofollow" target="_blank">superiorweldandfabsupply.com</a> to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link <a href="http://weldmongerstore.com/" rel="nofollow" target="_blank">http://weldmongerstore.com</a>/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Shop Upgrades

Brad Goodman

Thank you for listening to episode 268 of the Welding Tips and Tricks Podcast!  This week we're talking about some tricks you can do to get a consistent weld.  Brad Goodman joins in on this conversation to add some insight.  We hope that this episode helps you start laying more consistent beads!  Have a great week everyone!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!       Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&amp;N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&amp;S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.       This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Thank you for listening to episode 268 of the Welding Tips and Tricks Podcast!  This week we're talking about some tricks you can do to get a consistent weld.  Brad Goodman joins in on this conversation to add some insight.  We hope that this episode helps you start laying more consistent beads!  Have a great week everyone!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to <a href="https://www.patreon.com/Weldingtipsandtrickspodcast" rel="nofollow" target="_blank">www.patreon.com/weldingtipsandtrickspodcast</a>. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&amp;N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&amp;S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   <a href="https://forum.weldingtipsandtricks.com/" rel="nofollow" target="_blank">Welding Tips and Tricks Forum</a>   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           <a href="http://www.weldingtipsandtricks.com/" rel="nofollow" target="_blank">http://www.weldingtipsandtricks.com/</a>                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     <a href="http://www.superiorweldandfab.com/" rel="nofollow" target="_blank">http://www.superiorweldandfab.com/</a>                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        <a href="http://www.crummywelding.com/" rel="nofollow" target="_blank">http://www.crummywelding.com/</a>                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to <a href="http://superiorweldandfabsupply.com" rel="nofollow" target="_blank">superiorweldandfabsupply.com</a> to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link <a href="http://weldmongerstore.com/" rel="nofollow" target="_blank">http://weldmongerstore.com</a>/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Consistency with Brad Goodman 

Thank you for listening to episode 267 of the Welding Tips and Tricks Podcast!  This week's episode we're keeping up with our tradition by looking ahead to the upcoming year, at least that's how the episode starts.  It takes on it's on topic but overall keeps the theme.  Hope everyone has great plans for 2022 and looking forward to seeing them all come to life!  Have a great week!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!       Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&amp;N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&amp;S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.       This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Thank you for listening to episode 267 of the Welding Tips and Tricks Podcast!  This week's episode we're keeping up with our tradition by looking ahead to the upcoming year, at least that's how the episode starts.  It takes on it's on topic but overall keeps the theme.  Hope everyone has great plans for 2022 and looking forward to seeing them all come to life!  Have a great week!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to <a href="https://www.patreon.com/Weldingtipsandtrickspodcast" rel="nofollow" target="_blank">www.patreon.com/weldingtipsandtrickspodcast</a>. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&amp;N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&amp;S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   <a href="https://forum.weldingtipsandtricks.com/" rel="nofollow" target="_blank">Welding Tips and Tricks Forum</a>   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           <a href="http://www.weldingtipsandtricks.com/" rel="nofollow" target="_blank">http://www.weldingtipsandtricks.com/</a>                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     <a href="http://www.superiorweldandfab.com/" rel="nofollow" target="_blank">http://www.superiorweldandfab.com/</a>                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        <a href="http://www.crummywelding.com/" rel="nofollow" target="_blank">http://www.crummywelding.com/</a>                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to <a href="http://superiorweldandfabsupply.com" rel="nofollow" target="_blank">superiorweldandfabsupply.com</a> to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link <a href="http://weldmongerstore.com/" rel="nofollow" target="_blank">http://weldmongerstore.com</a>/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Looking ahead to 2022

Thank you for listening to ep 266 of the Welding Tips and Tricks Podcast!  For this week's episode we're taking a minute to look back over the past year and reflect on how it went.  We like to do this every year and think you should take the time to do it for yourselves.  Hope everyone had a great holiday season and thank you for understanding our holiday vacation break!  It's good to be back at it!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!       Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&amp;N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&amp;S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.       This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Thank you for listening to ep 266 of the Welding Tips and Tricks Podcast!  For this week's episode we're taking a minute to look back over the past year and reflect on how it went.  We like to do this every year and think you should take the time to do it for yourselves.  Hope everyone had a great holiday season and thank you for understanding our holiday vacation break!  It's good to be back at it!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to <a href="https://www.patreon.com/Weldingtipsandtrickspodcast" rel="nofollow" target="_blank">www.patreon.com/weldingtipsandtrickspodcast</a>. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&amp;N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&amp;S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   <a href="https://forum.weldingtipsandtricks.com/" rel="nofollow" target="_blank">Welding Tips and Tricks Forum</a>   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           <a href="http://www.weldingtipsandtricks.com/" rel="nofollow" target="_blank">http://www.weldingtipsandtricks.com/</a>                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     <a href="http://www.superiorweldandfab.com/" rel="nofollow" target="_blank">http://www.superiorweldandfab.com/</a>                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        <a href="http://www.crummywelding.com/" rel="nofollow" target="_blank">http://www.crummywelding.com/</a>                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to <a href="http://superiorweldandfabsupply.com" rel="nofollow" target="_blank">superiorweldandfabsupply.com</a> to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link <a href="http://weldmongerstore.com/" rel="nofollow" target="_blank">http://weldmongerstore.com</a>/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!

Looking back over 2021

Hey Everyone!  Just a heads up that we'll be back next week with our looking back over 2021!  We enjoyed our time off and took an extra week with New Years and all but looking forward to getting back to it for 2022!   If you're looking for something to listen to be sure to head over to the ArcJunkies Podcast and give this week's episode (206) a listen.  Jason had a really good conversation with Mike Miller about a dark part of our industry and blue collar workers in general.  Drunks and Alcohol can be a really big problem for some of us and we wanted to make sure that everyone hears this.  This episode is not family friendly but well worth a listen.  If you're new to the trade you really want to listen to this one!   

Hey Everyone!  Just a heads up that we'll be back next week with our looking back over 2021!  We enjoyed our time off and took an extra week with New Years and all but looking forward to getting back to it for 2022!   If you're looking for something to listen to be sure to head over to the ArcJunkies Podcast and give this week's episode (206) a listen.  Jason had a really good conversation with Mike Miller about a dark part of our industry and blue collar workers in general.  Drunks and Alcohol can be a really big problem for some of us and we wanted to make sure that everyone hears this.  This episode is not family friendly but well worth a listen.  If you're new to the trade you really want to listen to this one!

Coming Back Next Week! 

Thanks for Listening to the Welding Tips and Tricks Podcast!  We wanted to bring you another way of experiencing Welding Tips and Trick by being able to listen to Weldor's talking about Welding while your at work Welding!

Bought a TIG machine because of these guys. And I work in an office !!

Love this cast

Great poscast about welding and the bussiness of welding.

Welding Tips and Tricks Podcast

Hi and Thank you for listening to episode 42 of the Welding Tips and Tricks Podcast!  For this episode we had a great time chatting with Josh and Scott from Micro Arc Welding, also @Microarcwelder on Instagram.  If you have ever wondered about tool and die repair, laser welding, micro tig welding, and more this is going to be a great listen for you!  We dive pretty deep into it so be sure to pay attention and enjoy the ride!      Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Philip Kaminski, Scott Silva, Rick Alotto, Jacob Marple, Jacob Elder, and Dave Horvath.  Where can you find Micro Arc Welding?   On the web www.microarcwelding.com On Instagram @microarcwelder      Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.      We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.         Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram   Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.   This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!    New music brought to you by Jody's son Jake!

Hi and Thank you for listening to episode 42 of the Welding Tips and Tricks Podcast!  For this episode we had a great time chatting with Josh and Scott from Micro Arc Welding, also @Microarcwelder on Instagram.  If you have ever wondered about tool and die repair, laser welding, micro tig welding, and more this is going to be a great listen for you!  We dive pretty deep into it so be sure to pay attention and enjoy the ride!      Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to <a href="http://www.patreon.com/weldingtipsandtrickspodcast" rel="noopener nofollow" target="_blank">www.patreon.com/weldingtipsandtrickspodcast</a>. Everyone there is greatly appreciated. This months top supporters of the show are Philip Kaminski, Scott Silva, Rick Alotto, Jacob Marple, Jacob Elder, and <a href="https://www.patreon.com/user?u=4393383" rel="noopener nofollow" target="_blank">Dave Horvath</a>. Where can you find Micro Arc Welding?   On the web <a href="http://microarcwelding.com/" rel="nofollow" target="_blank">www.microarcwelding.com</a> On Instagram <a href="https://www.instagram.com/microarcwelder/" rel="nofollow" target="_blank">@microarcwelder</a>   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           <a href="http://www.weldingtipsandtricks.com/" rel="nofollow" target="_blank">http://www.weldingtipsandtricks.com/</a>                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     <a href="http://www.superiorweldandfab.com/" rel="nofollow" target="_blank">http://www.superiorweldandfab.com/</a>                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        <a href="http://www.crummywelding.com/" rel="nofollow" target="_blank">http://www.crummywelding.com/</a>                              @CrummyWelding on Instagram Interested in weld purging equipment as discussed in this show? Head over to <a href="https://www.superiorweldandfabsupply.com/" rel="noopener nofollow" target="_blank">superiorweldandfabsupply.com</a> to check out our complete selection of weld purging tools to help you make those perfect welds. Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link <a href="http://weldmongerstore.com/" rel="noopener nofollow" target="_blank">http://weldmongerstore.com/</a>.  All of which are great tools to have in your job toolbox and also your home shop box. This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!  New music brought to you by Jody's son Jake!

Welding Tips and Tricks Podcast Episode 42  Micro Arc Welding 

Adam Booth

Hi and Thank you for listening to episode 49 of the Welding Tips and Tricks Podcast.  For our guest on this episode we chatted with Adam Booth or also known as Abom79 on YouTube and Instagram.  If you don't know who Adam is you need to go check out his work.  He is a manual machinist that works on some large lathe and mill parts.  We know you'll enjoy this episode as much as we did!  It's always great to hear the stories from other we watch on YouTube!  So be sure to download, pop those ear buds in, hit play, drop your hood, and enjoy!    Welding Tips and Tricks Podcast Patreon Page      We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Philip Kaminski, Scott Silva, Rick Alotto, Jacob Marple, Jacob Elder, Shane Gunnin, Dave Horvath.      NYC CNC Intro to Tig Welding Class    Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.     Find more information at www.learntig.com     Where can you find Adam?   On YouTube Abom79 On Instagram @Abom79 Email abom1979@gmail.com        Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.      We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.         Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram   Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.   This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!    New music brought to you by Jody's son Jake!

Hi and Thank you for listening to episode 49 of the Welding Tips and Tricks Podcast.  For our guest on this episode we chatted with Adam Booth or also known as Abom79 on YouTube and Instagram.  If you don't know who Adam is you need to go check out his work.  He is a manual machinist that works on some large lathe and mill parts.  We know you'll enjoy this episode as much as we did!  It's always great to hear the stories from other we watch on YouTube!  So be sure to download, pop those ear buds in, hit play, drop your hood, and enjoy!    Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to <a href="http://www.patreon.com/weldingtipsandtrickspodcast" rel="noopener nofollow" target="_blank">www.patreon.com/weldingtipsandtrickspodcast</a>. Everyone there is greatly appreciated. This months top supporters of the show are Philip Kaminski, Scott Silva, Rick Alotto, Jacob Marple, Jacob Elder, Shane Gunnin, <a href="https://www.patreon.com/user?u=4393383" rel="noopener nofollow" target="_blank">Dave Horvath</a>.     NYC CNC Intro to Tig Welding Class    Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.     Find more information at <a href="http://www.learntig.com/" rel="nofollow" target="_blank">www.learntig.com</a>   Where can you find Adam?   On YouTube <a href="https://www.youtube.com/channel/UCw3UZn1tcVe7pH3R6C3Gcng" rel="nofollow" target="_blank">Abom79</a> On Instagram <a href="https://www.instagram.com/abom79/" rel="nofollow" target="_blank">@Abom79</a> Email abom1979@gmail.com     Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           <a href="http://www.weldingtipsandtricks.com/" rel="nofollow" target="_blank">http://www.weldingtipsandtricks.com/</a>                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     <a href="http://www.superiorweldandfab.com/" rel="nofollow" target="_blank">http://www.superiorweldandfab.com/</a>                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        <a href="http://www.crummywelding.com/" rel="nofollow" target="_blank">http://www.crummywelding.com/</a>                              @CrummyWelding on Instagram Interested in weld purging equipment as discussed in this show? Head over to <a href="https://www.superiorweldandfabsupply.com/" rel="noopener nofollow" target="_blank">superiorweldandfabsupply.com</a> to check out our complete selection of weld purging tools to help you make those perfect welds. Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link <a href="http://weldmongerstore.com/" rel="noopener nofollow" target="_blank">http://weldmongerstore.com/</a>.  All of which are great tools to have in your job toolbox and also your home shop box. This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!  New music brought to you by Jody's son Jake!

Welding Tips and Tricks Podcast Episode 49  Adam Booth

Thank you for listening to episode 163 of the Welding Tips and Tricks Podcast!  For this episode we thought it would be fun to act like we were just starting out Tig Welding Aluminum.  What all would you need?  We talk about everything from machines to filler and why you should get these things.  So if you're thinking of buying a Tig machine for starting a company or just messing around in the garage on the weekends you want to take some notes!      If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      We'd like to Thank our Sponsor for this Episode!    Clash of the Grinders by 3M       Thank you to Clash of the Grinders for sponsoring this episode!  Hopefully you were able to enter to get a chance to be selected as one of the 12 competitors for this compition that is going to be held on November 12th at Fabtech 2019.  If you're not going to able to make it to Fabtech you still can tune in to watch everything live on Facebook and YouTube!  Be sure to check out s.3m.com/cotg for up to date information!           We would also like to Thank Bugo Systems for sponsoring this episode!  For all your mechanized  welding and cutting needs be sure to check out Bugo.com to see the latest and greatest units!           Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&amp;N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&amp;S Metal Fabrication, Diesel Repair Services.        Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Thank you for listening to episode 163 of the Welding Tips and Tricks Podcast!  For this episode we thought it would be fun to act like we were just starting out Tig Welding Aluminum.  What all would you need?  We talk about everything from machines to filler and why you should get these things.  So if you're thinking of buying a Tig machine for starting a company or just messing around in the garage on the weekends you want to take some notes!      If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      We'd like to Thank our Sponsor for this Episode!    Clash of the Grinders by 3M      Thank you to Clash of the Grinders for sponsoring this episode!  Hopefully you were able to enter to get a chance to be selected as one of the 12 competitors for this compition that is going to be held on November 12th at Fabtech 2019.  If you're not going to able to make it to Fabtech you still can tune in to watch everything live on Facebook and YouTube!  Be sure to check out <a href="http://s.3m.com/cotg" rel="nofollow" target="_blank">s.3m.com/cotg</a> for up to date information!         We would also like to Thank Bugo Systems for sponsoring this episode!  For all your mechanized  welding and cutting needs be sure to check out <a href="https://bugo.com/" rel="noopener nofollow" target="_blank">Bugo.com</a> to see the latest and greatest units!          Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to <a href="https://www.patreon.com/Weldingtipsandtrickspodcast" rel="noopener nofollow" target="_blank">www.patreon.com/weldingtipsandtrickspodcast</a>. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, <a href="http://Yourwelder.com" rel="nofollow" target="_blank">Yourwelder.com</a>, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&amp;N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&amp;S Metal Fabrication, Diesel Repair Services.        Welding Tips and Tricks T-Shirts     Available at <a href="https://weldingtipsandtrickspodcast.com/" rel="noopener nofollow" target="_blank">Weldingtipsandtrickspodcast.com </a>  Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   <a href="https://forum.weldingtipsandtricks.com/" rel="noopener nofollow" target="_blank">Welding Tips and Tricks Forum</a>   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at <a href="mailto:WeldingTipsandTricksPodcast@gmail.com" rel="noopener">WeldingTipsandTricksPodcast@gmail.com</a>.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           <a href="http://www.weldingtipsandtricks.com/" rel="noopener nofollow" target="_blank">http://www.weldingtipsandtricks.com/</a>                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     <a href="http://www.superiorweldandfab.com/" rel="noopener nofollow" target="_blank">http://www.superiorweldandfab.com/</a>                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        <a href="http://www.crummywelding.com/" rel="noopener nofollow" target="_blank">http://www.crummywelding.com/</a>                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to <a href="http://superiorweldandfabsupply.com/" rel="noopener nofollow" target="_blank">superiorweldandfabsupply.com</a> to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link <a href="http://weldmongerstore.com/" rel="noopener nofollow" target="_blank">http://weldmongerstore.com</a>/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Starting Tig Welding Aluminum 

Hi and Thank you for listening to episode 61 of the Welding Tips and Tricks Podcast!  With Jonathan stepping out on his own and wanting to build Superior Welding we thought it would be a great time to talk about Building Your Business.  We are not experts in the field of market growth, but all three of us own a business, and each have ways and ideas to grow them how we see fit.  Also, ideas from market experts that we have heard and are applying to our personal business.  We had a good time talking about this and bouncing ideas off each other, hopefully you find some great takeaways from this episode!  Be sure to download, pop those earbuds in, hit play, and Enjoy! Be sure to see links below in the show notes to mentioned items from this episode!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!         Welding Tips and Tricks Podcast Patreon Page      We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Steve Funk, Shane Gunnin, Rick Alotto, Erik Ruppel, James Yocum, Thor Gudmundsson, Jacob Elder, Scott Silva, Noe Sanjuan, Alex Brown, Dave Horvath, and House of Chop.     NYC CNC Intro to Tig Welding Class    Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.     Find more information at www.learntig.com      Here are links to a few different mentioned items from this episode.  None are sponsors just passing on the information.  Enjoy   Made for Profit OverLap  E-Myth Revisited    Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum     Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.      We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.         Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram   Interested in weld purging equipment? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.   This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!    New music brought to you by Jody's son Jake!

Hi and Thank you for listening to episode 61 of the Welding Tips and Tricks Podcast!  With Jonathan stepping out on his own and wanting to build Superior Welding we thought it would be a great time to talk about Building Your Business.  We are not experts in the field of market growth, but all three of us own a business, and each have ways and ideas to grow them how we see fit.  Also, ideas from market experts that we have heard and are applying to our personal business.  We had a good time talking about this and bouncing ideas off each other, hopefully you find some great takeaways from this episode!  Be sure to download, pop those earbuds in, hit play, and Enjoy! Be sure to see links below in the show notes to mentioned items from this episode!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!       Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to <a href="http://www.patreon.com/weldingtipsandtrickspodcast" rel="noopener nofollow" target="_blank">www.patreon.com/weldingtipsandtrickspodcast</a>. Everyone there is greatly appreciated. This months top supporters of the show are Steve Funk, Shane Gunnin, Rick Alotto, Erik Ruppel, James Yocum, Thor Gudmundsson, Jacob Elder, Scott Silva, Noe Sanjuan, Alex Brown, Dave Horvath, and House of Chop.    NYC CNC Intro to Tig Welding Class    Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.     Find more information at <a href="http://www.learntig.com/" rel="nofollow" target="_blank">www.learntig.com</a>   Here are links to a few different mentioned items from this episode.  None are sponsors just passing on the information.  Enjoy   <a href="https://madeforprofit.com/" rel="nofollow" target="_blank">Made for Profit</a> <a href="https://seanwes.com/book/" rel="nofollow" target="_blank">OverLap</a> <a href="https://www.audible.com/pd/Business/The-E-Myth-Revisited-Audiobook/B002V1LGZE?source_code=GPAGBSH0508140001&amp;mkwid=sBOn1kKA5_dc&amp;pcrid=207910104431&amp;pmt=&amp;pkw=&amp;product=B002V1LGZE&amp;cvosrc=ppc%20cse.google%20shopping.197997180&amp;cvo_crid=207910104431&amp;cvo_pid=43667456799" rel="nofollow" target="_blank"> E-Myth Revisited </a>   Where Can You Find the Welding Tips and Tricks Forum?   <a href="http://forum.weldingtipsandtricks.com/" rel="nofollow" target="_blank">Welding Tips and Tricks Forum</a> Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           <a href="http://www.weldingtipsandtricks.com/" rel="nofollow" target="_blank">http://www.weldingtipsandtricks.com/</a>                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     <a href="http://www.superiorweldandfab.com/" rel="nofollow" target="_blank">http://www.superiorweldandfab.com/</a>                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        <a href="http://www.crummywelding.com/" rel="nofollow" target="_blank">http://www.crummywelding.com/</a>                              @CrummyWelding on Instagram Interested in weld purging equipment? Head over to <a href="https://www.superiorweldandfabsupply.com/" rel="noopener nofollow" target="_blank">superiorweldandfabsupply.com</a> to check out our complete selection of weld purging tools to help you make those perfect welds. Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link <a href="http://weldmongerstore.com/" rel="noopener nofollow" target="_blank">http://weldmongerstore.com/</a>.  All of which are great tools to have in your job toolbox and also your home shop box. This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!  New music brought to you by Jody's son Jake!

Welding Tips and Tricks Podcast Episode 61  Building Your Business

Thanks for listening to Episode 98 of the Welding Tips and Tricks Podcast! We received an email from a listener asking if we could do a topic on the issues you have running a small business out of your home garage. Things like noise problems and neighbors. We felt this could be something that a lot of people listening could relate to so we dove right in. As normal it took a few twists and turns but if you've been thinking of setting up your home shop you'll want to pay attention to this one for sure! Enjoy!  If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!        Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Frank Cea, Aiden Wells, Hogan, Tucker, Datum.build, Bibli, Forrevver Endeavors, Smashboogie 4x4, Shane Gunnin, David Doherty, Lick Skillet Fab, Steven Fish, Veteran Welding, WeldyMcWelds, Michael Mendez, House of Chop, Erik Ruppel, Smith Industries, James Yocum, Mike Howe, Cory Dobson,Scott Tasso, Anthony Chrisomalis, Richard Black, Yusuf Khan, Black Sheep Fab Shop, Andy Katanic, S&amp;S Metal Fabrication, and Noe Sanjuan.    NYC CNC Intro to Tig Welding Class    Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.     Find more information at www.learntig.com     Where Can You Find the Welding Tips and Tricks Forum?     Welding Tips and Tricks Forum     Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.      We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.         Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram   Interested in weld purging equipment? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.   This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Thanks for listening to Episode 98 of the Welding Tips and Tricks Podcast! We received an email from a listener asking if we could do a topic on the issues you have running a small business out of your home garage. Things like noise problems and neighbors. We felt this could be something that a lot of people listening could relate to so we dove right in. As normal it took a few twists and turns but if you've been thinking of setting up your home shop you'll want to pay attention to this one for sure! Enjoy! If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!       Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to <a href="http://www.patreon.com/weldingtipsandtrickspodcast" rel="nofollow" target="_blank">www.patreon.com/weldingtipsandtrickspodcast</a>. Everyone there is greatly appreciated. This months top supporters of the show are Frank Cea, Aiden Wells, Hogan, Tucker, Datum.build, Bibli, Forrevver Endeavors, Smashboogie 4x4, Shane Gunnin, David Doherty, Lick Skillet Fab, Steven Fish, Veteran Welding, WeldyMcWelds, Michael Mendez, House of Chop, Erik Ruppel, Smith Industries, James Yocum, Mike Howe, Cory Dobson,Scott Tasso, Anthony Chrisomalis, Richard Black, Yusuf Khan, Black Sheep Fab Shop, Andy Katanic, S&amp;S Metal Fabrication, and Noe Sanjuan.   NYC CNC Intro to Tig Welding Class    Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.     Find more information at <a href="http://www.nyccnc.com/events/#welding" rel="nofollow" target="_blank">www.learntig.co</a>m   Where Can You Find the Welding Tips and Tricks Forum?   <a href="http://forum.weldingtipsandtricks.com/" rel="nofollow" target="_blank">Welding Tips and Tricks Forum</a> Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           <a href="http://www.weldingtipsandtricks.com/" rel="nofollow" target="_blank">http://www.weldingtipsandtricks.com/</a>                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     <a href="http://www.superiorweldandfab.com/" rel="nofollow" target="_blank">http://www.superiorweldandfab.com/</a>                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        <a href="http://www.crummywelding.com/" rel="nofollow" target="_blank">http://www.crummywelding.com/</a>                              @CrummyWelding on Instagram Interested in weld purging equipment? Head over to <a href="https://www.superiorweldandfabsupply.com/" rel="noopener nofollow" target="_blank">superiorweldandfabsupply.com</a> to check out our complete selection of weld purging tools to help you make those perfect welds. Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link <a href="http://weldmongerstore.com/" rel="noopener nofollow" target="_blank">http://weldmongerstore.com/</a>.  All of which are great tools to have in your job toolbox and also your home shop box. This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Home Shop Problems 

Thank you for listening to episode 144 of the Welding Tips and Tricks Podcast.  We thought it would be a good time to talk about Grinders.  Why you might ask?  Because we all have a need for them in almost ever aspect of welding.  They might not be the most glamorous tool in our toolbox but at times they can be very valuable.  Also does cost and brand really matter?  These are the things we chat about this week.  Hope everyone has a great week!  Enjoy!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Thank you to our Sponsor for this episode BugO Systems!    Bugo Systems provides operator-controlled mechanized solutions for your welding, cutting, and custom solutions. Visit them at www.bugo.comimage: https://assets.libsyn.com/secure/show/83032/Bug_O.jpg     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, YourWelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&amp;N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&amp;S Metal Fabrication, Diesel Repair Services.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum       Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake and Artlist.io

Thank you for listening to episode 144 of the Welding Tips and Tricks Podcast.  We thought it would be a good time to talk about Grinders.  Why you might ask?  Because we all have a need for them in almost ever aspect of welding.  They might not be the most glamorous tool in our toolbox but at times they can be very valuable.  Also does cost and brand really matter?  These are the things we chat about this week.  Hope everyone has a great week!  Enjoy!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Thank you to our Sponsor for this episode BugO Systems!   Bugo Systems provides operator-controlled mechanized solutions for your welding, cutting, and custom solutions. Visit them at <a href="http://www.bugo.com/" rel="noopener nofollow" target="_blank">www.bugo.com</a>image: <a href="https://assets.libsyn.com/secure/show/83032/Bug_O.jpg" rel="nofollow" target="_blank">https://assets.libsyn.com/secure/show/83032/Bug_O.jpg</a>   Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to <a href="https://www.patreon.com/Weldingtipsandtrickspodcast" rel="nofollow" target="_blank">www.patreon.com/weldingtipsandtrickspodcast</a>. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, <a href="http://YourWelder.com" rel="nofollow" target="_blank">YourWelder.com</a>, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&amp;N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&amp;S Metal Fabrication, Diesel Repair Services.     Welding Tips and Tricks T-Shirts     Available at <a href="https://weldingtipsandtrickspodcast.com/" rel="nofollow" target="_blank">Weldingtipsandtrickspodcast.com </a>  Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   <a href="https://forum.weldingtipsandtricks.com/" rel="nofollow" target="_blank">Welding Tips and Tricks Forum</a>       Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           <a href="http://www.weldingtipsandtricks.com/" rel="nofollow" target="_blank">http://www.weldingtipsandtricks.com/</a>                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     <a href="http://www.superiorweldandfab.com/" rel="nofollow" target="_blank">http://www.superiorweldandfab.com/</a>                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        <a href="http://www.crummywelding.com/" rel="nofollow" target="_blank">http://www.crummywelding.com/</a>                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to <a href="http://superiorweldandfabsupply.com" rel="nofollow" target="_blank">superiorweldandfabsupply.com</a> to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link <a href="http://weldmongerstore.com/" rel="nofollow" target="_blank">http://weldmongerstore.com</a>/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake and <a href="http://Artlist.io" rel="nofollow" target="_blank">Artlist.io</a>

Grinders

Thank you for listening episode 170 of the Welding Tips and Tricks Podcast!  For this weeks topic we chat about Tig Brazing!  Jody recently posted a video of modifying a file into a knife and added a lot of Alumimun and Silicon Bronze to shape a handle.  We wanted to dive a little deep into this conversation and chat about the different types of Tig Brazing we have done and how we have done it best.  Hope you get a few good tips out of this one!  Enjoy   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      Welding Tips and Tricks Podcast Patreon Page     We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&amp;N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&amp;S Metal Fabrication, Diesel Repair Services.    Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum     Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Thank you for listening episode 170 of the Welding Tips and Tricks Podcast!  For this weeks topic we chat about Tig Brazing!  Jody recently posted a video of modifying a file into a knife and added a lot of Alumimun and Silicon Bronze to shape a handle.  We wanted to dive a little deep into this conversation and chat about the different types of Tig Brazing we have done and how we have done it best.  Hope you get a few good tips out of this one!  Enjoy   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to <a href="https://www.patreon.com/Weldingtipsandtrickspodcast" rel="noopener nofollow" target="_blank">www.patreon.com/weldingtipsandtrickspodcast</a>. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, <a href="http://Yourwelder.com" rel="nofollow" target="_blank">Yourwelder.com</a>, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&amp;N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&amp;S Metal Fabrication, Diesel Repair Services.    Welding Tips and Tricks T-Shirts     Available at <a href="https://weldingtipsandtrickspodcast.com/" rel="noopener nofollow" target="_blank">Weldingtipsandtrickspodcast.com </a>  Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   <a href="https://forum.weldingtipsandtricks.com/" rel="noopener nofollow" target="_blank">Welding Tips and Tricks Forum</a>     Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at <a href="mailto:WeldingTipsandTricksPodcast@gmail.com" rel="noopener">WeldingTipsandTricksPodcast@gmail.com</a>.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           <a href="http://www.weldingtipsandtricks.com/" rel="noopener nofollow" target="_blank">http://www.weldingtipsandtricks.com/</a>                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     <a href="http://www.superiorweldandfab.com/" rel="noopener nofollow" target="_blank">http://www.superiorweldandfab.com/</a>                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        <a href="http://www.crummywelding.com/" rel="noopener nofollow" target="_blank">http://www.crummywelding.com/</a>                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to <a href="http://superiorweldandfabsupply.com/" rel="noopener nofollow" target="_blank">superiorweldandfabsupply.com</a> to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link <a href="http://weldmongerstore.com/" rel="noopener nofollow" target="_blank">http://weldmongerstore.com</a>/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Tig Brazing 

Hi and thanks for listening to episode 4 of the Welding Tips and Tricks Podcast.  This episode we wanted to touch base about what are some good tools to have on hand when you start a job.  We thought it would be a good continuation from the last topic pertaining to weld tests and landing your job.   Hopefully, this will help any of you new guys answer the question of where do I start with what tools to have on hand or starting a good toolbox for the different job fields we've personally experienced.  Thanks again for listening and enjoy the show!   Show Note Times:    0:00-0:44       Introduction 0:44-1:18       Jody's thoughts  1:18-3:25       In Jonathan's line of work 3:25-5:36       Find out what tools you need 5:36-7:47       Roy's thoughts 7:47-8:10       Borrowing Tools 8:10-9:00       Having you own grinder in the ad for a job 9:00-9:58       Where we are in the USA 9:58-12:45     Required tool list 12:45-13:44   What type of work Jonathan does for his day job  13:44-14:20   Investing into your future  14:20-15:38   Big tools in Jonathan's box at work 15:38-17:04   Having the right tools for your job 17:04-20:00   Cheaper tools vs. Higher quality tools 20:00-22:45   Providing a company with tools? 22:45-23:17   Painting/Marking your tools 23:17-23:49   I have too many clamps said no Weldor 23:49-26:54   Used tools 26:54-30:47   Ace in the hole tool 30:47-32:15   Homemade hammers 32:15-32:55   Make it bigger 32:55-35:00   Final thoughts and Closing      Where can you find us at?     You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.   Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram  Where can you find a Tig Finger?  You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.    This Podcast has been brought to you by Weldor's for Weldor's so that you can listen to Weldor's talk about Welding while you're Welding!       Podcast music can be found at https://www.youtube.com/watch?v=j3UyYZ85Tiw Doctor Vox -Endgames   Royalty Free Download

Hi and thanks for listening to episode 4 of the Welding Tips and Tricks Podcast.  This episode we wanted to touch base about what are some good tools to have on hand when you start a job.  We thought it would be a good continuation from the last topic pertaining to weld tests and landing your job.   Hopefully, this will help any of you new guys answer the question of where do I start with what tools to have on hand or starting a good toolbox for the different job fields we've personally experienced.  Thanks again for listening and enjoy the show! Show Note Times: <ul> <li>0:00-0:44       Introduction</li> <li>0:44-1:18       Jody's thoughts </li> <li>1:18-3:25       In Jonathan's line of work</li> <li>3:25-5:36       Find out what tools you need</li> <li>5:36-7:47       Roy's thoughts</li> <li>7:47-8:10       Borrowing Tools</li> <li>8:10-9:00       Having you own grinder in the ad for a job</li> <li>9:00-9:58       Where we are in the USA</li> <li>9:58-12:45     Required tool list</li> <li>12:45-13:44   What type of work Jonathan does for his day job </li> <li>13:44-14:20   Investing into your future </li> <li>14:20-15:38   Big tools in Jonathan's box at work</li> <li>15:38-17:04   Having the right tools for your job</li> <li>17:04-20:00   Cheaper tools vs. Higher quality tools</li> <li>20:00-22:45   Providing a company with tools?</li> <li>22:45-23:17   Painting/Marking your tools</li> <li>23:17-23:49   I have too many clamps said no Weldor</li> <li>23:49-26:54   Used tools</li> <li>26:54-30:47   Ace in the hole tool</li> <li>30:47-32:15   Homemade hammers</li> <li>32:15-32:55   Make it bigger</li> <li>32:55-35:00   Final thoughts and Closing  </li> </ul>   Where can you find us at?     You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.   Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           <a href="http://www.weldingtipsandtricks.com/" rel="nofollow" target="_blank">http://www.weldingtipsandtricks.com/</a>                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     <a href="http://www.superiorweldandfab.com/" rel="nofollow" target="_blank">http://www.superiorweldandfab.com/</a>                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        <a href="http://www.crummywelding.com/" rel="nofollow" target="_blank">http://www.crummywelding.com/</a>                              @CrummyWelding on Instagram Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link <a href="http://weldmongerstore.com/" rel="nofollow" target="_blank">http://weldmongerstore.com/</a>.  All of which are great tools to have in your job toolbox and also your home shop box.   This Podcast has been brought to you by Weldor's for Weldor's so that you can listen to Weldor's talk about Welding while you're Welding!       Podcast music can be found at <a href="https://www.youtube.com/watch?v=j3UyYZ85Tiw" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=j3UyYZ85Tiw</a> Doctor Vox -Endgames   Royalty Free Download

Welding Tips and Tricks Podcast Episode 4  Starting Out Tools

We get asked often Where, What, How, Why to start something on the side.  Most of the time this also includes a limited budget, which we all understand!  Bootstrapping is how the majority of business start out.  We thought it would be fun to chat about where we like to look for deals and what we like to look for.  This is something that we've talked about a few times in the past but the amount of questions we get about tells us it's a very deep topic and needs more attention!  Hope everyone had a great week! Enjoy!         If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!        Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Hogan, Tucker, Datum.build, Bibli, Forrevver Endeavors, Smashboogie 4x4, Shane Gunnin, David Doherty, Lick Skillet Fab, Norse Welding, Veteran Welding, House of Chop, Erik Ruppel, Smith Industries, Mike Howe, Cory Dobson,Scott Tasso, Anthony Chrisomalis, Richard Black, Yusuf Khan, Black Sheep Fab Shop, Andy Katanic, S&amp;S Metal Fabrication, Chris McQuay, Brandon Parry, Demented Metal Werkz, and Noe Sanjuan.   Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..    NYC CNC Intro to Tig Welding Class    Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.     Find more information at www.learntig.com       Where Can You Find the Welding Tips and Tricks Forum?     Welding Tips and Tricks Forum     Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.      We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.         Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram Interested in weld purging equipment? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds. Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box. This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

We get asked often Where, What, How, Why to start something on the side.  Most of the time this also includes a limited budget, which we all understand!  Bootstrapping is how the majority of business start out.  We thought it would be fun to chat about where we like to look for deals and what we like to look for.  This is something that we've talked about a few times in the past but the amount of questions we get about tells us it's a very deep topic and needs more attention!  Hope everyone had a great week! Enjoy!       If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!       Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to <a href="http://www.patreon.com/weldingtipsandtrickspodcast" rel="noopener nofollow" target="_blank">www.patreon.com/weldingtipsandtrickspodcast</a>. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Hogan, Tucker, Datum.build, Bibli, Forrevver Endeavors, Smashboogie 4x4, Shane Gunnin, David Doherty, Lick Skillet Fab, Norse Welding, Veteran Welding, House of Chop, Erik Ruppel, Smith Industries, Mike Howe, Cory Dobson,Scott Tasso, Anthony Chrisomalis, Richard Black, Yusuf Khan, Black Sheep Fab Shop, Andy Katanic, S&amp;S Metal Fabrication, Chris McQuay, Brandon Parry, Demented Metal Werkz, and Noe Sanjuan.   Welding Tips and Tricks T-Shirts     Available at <a href="https://weldingtipsandtrickspodcast.com/" rel="noopener nofollow" target="_blank">Weldingtipsandtrickspodcast.com </a>  Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   NYC CNC Intro to Tig Welding Class    Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.     Find more information at <a href="http://www.nyccnc.com/events/#welding" rel="noopener nofollow" target="_blank">www.learntig.co</a>m     Where Can You Find the Welding Tips and Tricks Forum?   <a href="http://forum.weldingtipsandtricks.com/" rel="noopener nofollow" target="_blank">Welding Tips and Tricks Forum</a> Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at <a href="mailto:WeldingTipsandTricksPodcast@gmail.com" rel="noopener">WeldingTipsandTricksPodcast@gmail.com</a>.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           <a href="http://www.weldingtipsandtricks.com/" rel="noopener nofollow" target="_blank">http://www.weldingtipsandtricks.com/</a>                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     <a href="http://www.superiorweldandfab.com/" rel="noopener nofollow" target="_blank">http://www.superiorweldandfab.com/</a>                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        <a href="http://www.crummywelding.com/" rel="noopener nofollow" target="_blank">http://www.crummywelding.com/</a>                              @CrummyWelding on Instagram Interested in weld purging equipment? Head over to <a href="https://www.superiorweldandfabsupply.com/" rel="noopener nofollow" target="_blank">superiorweldandfabsupply.com</a> to check out our complete selection of weld purging tools to help you make those perfect welds. Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link <a href="http://weldmongerstore.com/" rel="noopener nofollow" target="_blank">http://weldmongerstore.com/</a>.  All of which are great tools to have in your job toolbox and also your home shop box. This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Budget Welding

Thanks for listening to Episode 88 of the Welding Tips and Tricks Podcast!  We've had a bunch of requests for a topic episode about welding tables so we figured it would be a good time to chat about just that. This topic is like many others, very deep, so we may touch on things we've mentioned in the past but it's all good. As we grow as welders our needs for our table changes with us. Starting out a very simple flat surface is perfect but as time goes on and the jobs get more complex, so does the tooling needed. We hope that you find a few nuggets of information in this episode or possible light a fire in you to upgrade to the next level.      If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!        Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Aiden Wells, Shane Gunnin, David Doherty, Lick Skillet Fab, Steven Fish, Veteran Welding, WeldyMcWelds, Michael Mendez, House of Chop, Erik Ruppel, Smith Industries, James Yocum, Mike Howe, Cory Dobson,Scott Tasso, Anthony Chrisomalis, Richard Black, Yusuf Khan, Thor Gudmundsson, Black Sheep Fab Shop, Andy Katanic, S&amp;S Metal Fabrication, Scott Silva, and Noe Sanjuan.    NYC CNC Intro to Tig Welding Class    Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.     Find more information at www.learntig.com   Where can you find more information about some of the items mentioned in this episode?       David Demoise on Instagram @DDemoise Weldtables.com  Clampplus.com  Stronghand Tables   Where Can You Find the Welding Tips and Tricks Forum?     Welding Tips and Tricks Forum     Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.      We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.         Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram   Interested in weld purging equipment? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.   This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Thanks for listening to Episode 88 of the Welding Tips and Tricks Podcast!  We've had a bunch of requests for a topic episode about welding tables so we figured it would be a good time to chat about just that. This topic is like many others, very deep, so we may touch on things we've mentioned in the past but it's all good. As we grow as welders our needs for our table changes with us. Starting out a very simple flat surface is perfect but as time goes on and the jobs get more complex, so does the tooling needed. We hope that you find a few nuggets of information in this episode or possible light a fire in you to upgrade to the next level.      If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!       Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to <a href="http://www.patreon.com/weldingtipsandtrickspodcast" rel="nofollow" target="_blank">www.patreon.com/weldingtipsandtrickspodcast</a>. Everyone there is greatly appreciated. This months top supporters of the show are Aiden Wells, Shane Gunnin, David Doherty, Lick Skillet Fab, Steven Fish, Veteran Welding, WeldyMcWelds, Michael Mendez, House of Chop, Erik Ruppel, Smith Industries, James Yocum, Mike Howe, Cory Dobson,Scott Tasso, Anthony Chrisomalis, Richard Black, Yusuf Khan, Thor Gudmundsson, Black Sheep Fab Shop, Andy Katanic, S&amp;S Metal Fabrication, Scott Silva, and Noe Sanjuan.   NYC CNC Intro to Tig Welding Class    Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.     Find more information at <a href="http://www.nyccnc.com/events/#welding" rel="nofollow" target="_blank">www.learntig.com</a>   Where can you find more information about some of the items mentioned in this episode?     David Demoise on Instagram <a href="https://www.instagram.com/ddemoise/" rel="nofollow" target="_blank">@DDemoise</a><a href="https://weldtables.com/" rel="nofollow" target="_blank"> Weldtables.com</a> <a href="https://www.clampplus.com/" rel="nofollow" target="_blank"> Clampplus.com</a> Stronghand Tables   Where Can You Find the Welding Tips and Tricks Forum?   <a href="http://forum.weldingtipsandtricks.com/" rel="nofollow" target="_blank">Welding Tips and Tricks Forum</a> Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           <a href="http://www.weldingtipsandtricks.com/" rel="nofollow" target="_blank">http://www.weldingtipsandtricks.com/</a>                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     <a href="http://www.superiorweldandfab.com/" rel="nofollow" target="_blank">http://www.superiorweldandfab.com/</a>                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        <a href="http://www.crummywelding.com/" rel="nofollow" target="_blank">http://www.crummywelding.com/</a>                              @CrummyWelding on Instagram Interested in weld purging equipment? Head over to <a href="https://www.superiorweldandfabsupply.com/" rel="noopener nofollow" target="_blank">superiorweldandfabsupply.com</a> to check out our complete selection of weld purging tools to help you make those perfect welds. Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link <a href="http://weldmongerstore.com/" rel="noopener nofollow" target="_blank">http://weldmongerstore.com/</a>.  All of which are great tools to have in your job toolbox and also your home shop box. This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Welding Tips and Tricks Podcast Episode 88  Welding Tables

Thanks for listening to episode 108 of the Welding Tips and Tricks Podcast!  For this episode we thought it was time we discussed Stick Welding.  This is the process most weldors start with and will use off and on during their career, depending on the field they're in.  JD Brewer joined in on this conversation and added some of his experience with stick welding.  We hope you pick up a few tips in this one and they help you take your next step in welding!  Enjoy!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!        Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Alex Brown, Andy Katanic, Anthony Chrisomalis, Bibli, Black Sheep Fab Shop, Brandon Parry, Cory Dobson, Datum.build, David Doherty, Demented Metal Werkz, Erik Ruppel, Forrever Endeavors, RoboVent, H4 Fab Works, House of Chop, Jacob Elder, Jimi Luck, Kyle Lenker, Lick Skillet Fab, Mike Howe, Noe Sanjuan, Norse Welding, Richard Black, Ricks Welding Service, S&amp;S Metal Fabrication, Scott Tasso, Shane Gunnin, Smashboogie 4x4, Smith Industries, Steven Fish, Tucker, Unobtainium Welding, Veteran Welding Co, Yusuf Khan.    Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..    NYC CNC Intro to Tig Welding Class    Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.     Find more information at www.learntig.com       Where Can You Find the Welding Tips and Tricks Forum?     Welding Tips and Tricks Forum        Where to find the Lincoln Electric information talked about?    Low Hydrogen Porosity  Stick Electrodes Lincoln Electric.com   Where can you find Us?       You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.      We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.         Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram   Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.   This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!    New music brought to you by Jody's son Jake!  

Thanks for listening to episode 108 of the Welding Tips and Tricks Podcast!  For this episode we thought it was time we discussed Stick Welding.  This is the process most weldors start with and will use off and on during their career, depending on the field they're in.  JD Brewer joined in on this conversation and added some of his experience with stick welding.  We hope you pick up a few tips in this one and they help you take your next step in welding!  Enjoy!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!       Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to <a href="http://www.patreon.com/weldingtipsandtrickspodcast" rel="noopener nofollow" target="_blank">www.patreon.com/weldingtipsandtrickspodcast</a>. Everyone there is greatly appreciated. This months top supporters of the show are Alex Brown, Andy Katanic, Anthony Chrisomalis, Bibli, Black Sheep Fab Shop, Brandon Parry, Cory Dobson, Datum.build, David Doherty, Demented Metal Werkz, Erik Ruppel, Forrever Endeavors, RoboVent, H4 Fab Works, House of Chop, Jacob Elder, Jimi Luck, Kyle Lenker, Lick Skillet Fab, Mike Howe, Noe Sanjuan, Norse Welding, Richard Black, Ricks Welding Service, S&amp;S Metal Fabrication, Scott Tasso, Shane Gunnin, Smashboogie 4x4, Smith Industries, Steven Fish, Tucker, Unobtainium Welding, Veteran Welding Co, Yusuf Khan.    Welding Tips and Tricks T-Shirts     Available at <a href="https://weldingtipsandtrickspodcast.com/" rel="noopener nofollow" target="_blank">Weldingtipsandtrickspodcast.com </a>  Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   NYC CNC Intro to Tig Welding Class    Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.     Find more information at <a href="http://www.nyccnc.com/events/#welding" rel="noopener nofollow" target="_blank">www.learntig.co</a>m     Where Can You Find the Welding Tips and Tricks Forum?   <a href="http://forum.weldingtipsandtricks.com/" rel="noopener nofollow" target="_blank">Welding Tips and Tricks Forum</a>   Where to find the Lincoln Electric information talked about?   <a href="https://www.lincolnelectric.com/en-us/support/welding-how-to/Pages/low-hydrogen-porosity-detail.aspx" rel="nofollow" target="_blank"> Low Hydrogen Porosity</a> <a href="https://www.lincolnelectric.com/en-us/consumables/stick-electrodes/Pages/stick-electrodes.aspx" rel="nofollow" target="_blank"> Stick Electrodes</a> <a href="https://www.lincolnelectric.com/en-us/Pages/default.aspx" rel="nofollow" target="_blank">Lincoln Electric.com</a>   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           <a href="http://www.weldingtipsandtricks.com/" rel="nofollow" target="_blank">http://www.weldingtipsandtricks.com/</a>                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     <a href="http://www.superiorweldandfab.com/" rel="nofollow" target="_blank">http://www.superiorweldandfab.com/</a>                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        <a href="http://www.crummywelding.com/" rel="nofollow" target="_blank">http://www.crummywelding.com/</a>                              @CrummyWelding on Instagram Interested in weld purging equipment as discussed in this show? Head over to <a href="https://www.superiorweldandfabsupply.com/" rel="noopener nofollow" target="_blank">superiorweldandfabsupply.com</a> to check out our complete selection of weld purging tools to help you make those perfect welds. Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link <a href="http://weldmongerstore.com/" rel="noopener nofollow" target="_blank">http://weldmongerstore.com/</a>.  All of which are great tools to have in your job toolbox and also your home shop box. This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!  New music brought to you by Jody's son Jake!

Stick Welding

Hi and Thanks for listening to episode 68 of the Welding Tips and Tricks Podcast!  All three of us get asked often about how to control distortion when it comes to welding so we figured it would be a good topic for us to dive into for this episode.  This is a very deep topic so we only scratch the surface of it but hope that we give you a few tips to put in your mental toolbox to try the next time you have something new come across your bench!  So be sure to hit download, pop those earbuds in, hit play, drop your hood, and Enjoy! If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!       Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are James Greer, Shane Gunnin, Rick Alotto, Erik Ruppel, James Yocum, Smith Industries, Mike Howe, Anthony Chrisomalis, Richard Black, Thor Gudmundsson, Scott Silva, Noe Sanjuan, WeldyMcWelds, and House of Chop.    NYC CNC Intro to Tig Welding Class    Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.     Find more information at www.learntig.com        Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum     Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.      We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.         Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram   Interested in weld purging equipment? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.   This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Hi and Thanks for listening to episode 68 of the Welding Tips and Tricks Podcast!  All three of us get asked often about how to control distortion when it comes to welding so we figured it would be a good topic for us to dive into for this episode.  This is a very deep topic so we only scratch the surface of it but hope that we give you a few tips to put in your mental toolbox to try the next time you have something new come across your bench!  So be sure to hit download, pop those earbuds in, hit play, drop your hood, and Enjoy! If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!       Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to <a href="http://www.patreon.com/weldingtipsandtrickspodcast" rel="nofollow" target="_blank">www.patreon.com/weldingtipsandtrickspodcast</a>. Everyone there is greatly appreciated. This months top supporters of the show are James Greer, Shane Gunnin, Rick Alotto, Erik Ruppel, James Yocum, Smith Industries, Mike Howe, Anthony Chrisomalis, Richard Black, Thor Gudmundsson, Scott Silva, Noe Sanjuan, WeldyMcWelds, and House of Chop.    NYC CNC Intro to Tig Welding Class    Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.     Find more information at <a href="http://www.nyccnc.com/events/#welding" rel="nofollow" target="_blank">www.learntig.com</a>       Where Can You Find the Welding Tips and Tricks Forum?   <a href="http://forum.weldingtipsandtricks.com/" rel="nofollow" target="_blank">Welding Tips and Tricks Forum</a> Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           <a href="http://www.weldingtipsandtricks.com/" rel="nofollow" target="_blank">http://www.weldingtipsandtricks.com/</a>                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     <a href="http://www.superiorweldandfab.com/" rel="nofollow" target="_blank">http://www.superiorweldandfab.com/</a>                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        <a href="http://www.crummywelding.com/" rel="nofollow" target="_blank">http://www.crummywelding.com/</a>                              @CrummyWelding on Instagram Interested in weld purging equipment? Head over to <a href="https://www.superiorweldandfabsupply.com/" rel="noopener nofollow" target="_blank">superiorweldandfabsupply.com</a> to check out our complete selection of weld purging tools to help you make those perfect welds. Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link <a href="http://weldmongerstore.com/" rel="noopener nofollow" target="_blank">http://weldmongerstore.com/</a>.  All of which are great tools to have in your job toolbox and also your home shop box. This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Welding Tips and Tricks Podcast Episode 68 Distortion 

Hi and Thanks for listening to episode 21 of the Welding Tips and Tricks Podcast.  For this episode we had a fun chat with JD Brewer or @apexish on Instagram.  If you follow Jody on you have seen JD!  If you're thinking of stepping out on your own this will be a great episode for you.  So download, pop those earbuds in, hit play, drop that hood, and enjoy.    Remember to subscribe to the podcast on your favorite platform and leave us a comment.  It really helps us out in the ranking on iTunes!  Our goal, with your help, is to be the best educational podcast for the trades on all platforms.  We really appreciate all the support we have been getting and it helps us keep moving for with this podcast!    Like what you hear? Would you like to help support the Welding Tips &amp; Tricks Podcast? We now have a page over on Patreon. You can be Patron of our podcast at many levels and rewards for those levels. The three of us love helping the welding community but there are costs involved in producing it. Go over to www.patreon.com/weldingtipsandtrickspodcast and become one of our Patrons. Every dollar helps and we sincerely appreciate it.  Our top Patron supporter this month is Philip Kaminski!   Thanks,   Jonathan, Roy and Jody    Show Notes and Time  0:00-1:17               Introduction 1:17-2:10               Who is JD? 2:10-7:36               JD's back story 7:36-9:02               Change the Norm 9:02-12:28             Invest in yourself 12:28-15:32           Type of work at Apex 15:32-17:00           Snowball effect 17:00-17:43           Mezzanine  17:43-21:38           Rig Equipment and MP210 21:38-24:47           Dual shield Fluxcore 24:47-27:44           What is Dual shield? 27:44-31:01           Stepping out on your own equipment  31:01-33:03           You don't know what you'll get 33:03-35:09           Get Started 35:09-35:53           Favorite type of work 35:53-38:41           Shop Gantry Crane 38:41-46:08           Metabo  46:11-55:11           Cost for different cutting processes  55:11-59:30           Fewer steps 59:30-1:04:35        PlasmaCAM 1:04:35-1:07:41     Saving time = Better bottom line 1:07:41-1:10:40     Best advise  1:10:40-1:14:32     Bad Day  1:14:32-1:20:09     Evoluation Dry Cut Saw 1:20:09-1:22:11     Summarizing 1:22:11-1:24:23     The Feeling 1:24:23-1:24:56     Getting a hold of JD 1:24:56-1:27:43     Closing       Where can you find JD?   On Instagram @apexish       Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.      We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram   Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.   This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!   Podcast music can be found at https://www.youtube.com/watch?v=j3UyYZ85Tiw Doctor Vox -Endgames   Royalty Free Download

Hi and Thanks for listening to episode 21 of the Welding Tips and Tricks Podcast.  For this episode we had a fun chat with JD Brewer or @apexish on Instagram.  If you follow Jody on you have seen JD!  If you're thinking of stepping out on your own this will be a great episode for you.  So download, pop those earbuds in, hit play, drop that hood, and enjoy.    Remember to subscribe to the podcast on your favorite platform and leave us a comment.  It really helps us out in the ranking on iTunes!  Our goal, with your help, is to be the best educational podcast for the trades on all platforms.  We really appreciate all the support we have been getting and it helps us keep moving for with this podcast!   Like what you hear? Would you like to help support the Welding Tips &amp; Tricks Podcast? We now have a page over on Patreon. You can be Patron of our podcast at many levels and rewards for those levels. The three of us love helping the welding community but there are costs involved in producing it. Go over to <a href="http://www.patreon.com/weldingtipsandtrickspodcast" rel="nofollow" target="_blank">www.patreon.com/weldingtipsandtrickspodcast</a> and become one of our Patrons. Every dollar helps and we sincerely appreciate it.  Our top Patron supporter this month is Philip Kaminski!   Thanks,   Jonathan, Roy and Jody Show Notes and Time <ul> <li>0:00-1:17               Introduction</li> <li>1:17-2:10               Who is JD?</li> <li>2:10-7:36               JD's back story</li> <li>7:36-9:02               Change the Norm</li> <li>9:02-12:28             Invest in yourself</li> <li>12:28-15:32           Type of work at Apex</li> <li>15:32-17:00           Snowball effect</li> <li>17:00-17:43           Mezzanine </li> <li>17:43-21:38           Rig Equipment and MP210</li> <li>21:38-24:47           Dual shield Fluxcore</li> <li>24:47-27:44           What is Dual shield?</li> <li>27:44-31:01           Stepping out on your own equipment </li> <li>31:01-33:03           You don't know what you'll get</li> <li>33:03-35:09           Get Started</li> <li>35:09-35:53           Favorite type of work</li> <li>35:53-38:41           Shop Gantry Crane</li> <li>38:41-46:08           Metabo </li> <li>46:11-55:11           Cost for different cutting processes </li> <li>55:11-59:30           Fewer steps</li> <li>59:30-1:04:35        PlasmaCAM</li> <li>1:04:35-1:07:41     Saving time = Better bottom line</li> <li>1:07:41-1:10:40     Best advise </li> <li>1:10:40-1:14:32     Bad Day </li> <li>1:14:32-1:20:09     Evoluation Dry Cut Saw</li> <li>1:20:09-1:22:11     Summarizing</li> <li>1:22:11-1:24:23     The Feeling</li> <li>1:24:23-1:24:56     Getting a hold of JD</li> <li>1:24:56-1:27:43     Closing </li> </ul>     Where can you find JD?   On Instagram <a href="https://www.instagram.com/apexish/" rel="nofollow" target="_blank">@apexish</a>       Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           <a href="http://www.weldingtipsandtricks.com/" rel="nofollow" target="_blank">http://www.weldingtipsandtricks.com/</a>                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     <a href="http://www.superiorweldandfab.com/" rel="nofollow" target="_blank">http://www.superiorweldandfab.com/</a>                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        <a href="http://www.crummywelding.com/" rel="nofollow" target="_blank">http://www.crummywelding.com/</a>                              @CrummyWelding on Instagram Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link <a href="http://weldmongerstore.com/" rel="nofollow" target="_blank">http://weldmongerstore.com/</a>.  All of which are great tools to have in your job toolbox and also your home shop box. This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!  Podcast music can be found at <a href="https://www.youtube.com/watch?v=j3UyYZ85Tiw" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=j3UyYZ85Tiw</a> Doctor Vox -Endgames   Royalty Free Download

Welding Tips and Tricks Podcast Episode 21  JD Brewer 

Sean Flottmann

Thank you for listening to episode 182 of the Welding Tips and Tricks Podcast!  For this weeks episode we had a fun conversation with the one and only @dabswellington aka Sean Flottmann.  If you've never heard of Little Dabbie you've been living under a rock!  Sean does some amazing Tig welded metal art along with is a very skilled fabricator.  We hope you enjoy this conversation as much as we did recording it!  Have a great week!      If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&amp;N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&amp;S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.     Where can you Find Dabs?    On Instagram @Dabswellington    Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL (Currently out of XL)   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!    New music brought to you by Jody's son Jake

Thank you for listening to episode 182 of the Welding Tips and Tricks Podcast!  For this weeks episode we had a fun conversation with the one and only @dabswellington aka Sean Flottmann.  If you've never heard of Little Dabbie you've been living under a rock!  Sean does some amazing Tig welded metal art along with is a very skilled fabricator.  We hope you enjoy this conversation as much as we did recording it!  Have a great week!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to <a href="https://www.patreon.com/Weldingtipsandtrickspodcast" rel="nofollow" target="_blank">www.patreon.com/weldingtipsandtrickspodcast</a>. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, <a href="http://Yourwelder.com" rel="nofollow" target="_blank">Yourwelder.com</a>, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&amp;N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&amp;S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.     Where can you Find Dabs?    On Instagram <a href="https://www.instagram.com/dabswellington/?hl=en" rel="nofollow" target="_blank">@Dabswellington</a>    Welding Tips and Tricks T-Shirts     Available at <a href="https://weldingtipsandtrickspodcast.com/" rel="nofollow" target="_blank">Weldingtipsandtrickspodcast.com </a>  Sizes S-3XL (Currently out of XL)   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   <a href="https://forum.weldingtipsandtricks.com/" rel="nofollow" target="_blank">Welding Tips and Tricks Forum</a>   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           <a href="http://www.weldingtipsandtricks.com/" rel="nofollow" target="_blank">http://www.weldingtipsandtricks.com/</a>                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     <a href="http://www.superiorweldandfab.com/" rel="nofollow" target="_blank">http://www.superiorweldandfab.com/</a>                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        <a href="http://www.crummywelding.com/" rel="nofollow" target="_blank">http://www.crummywelding.com/</a>                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to <a href="http://superiorweldandfabsupply.com" rel="nofollow" target="_blank">superiorweldandfabsupply.com</a> to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link <a href="http://weldmongerstore.com/" rel="nofollow" target="_blank">http://weldmongerstore.com</a>/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!    New music brought to you by Jody's son Jake

Dabswellington aka Little Dabbie, Dabsalot, or Sean Flottmann

Thank you for listening to episode 130 of the Welding Tips and Tricks Podcast!  We got an email asking how they can maximize the time they're in welding school and what to expect for an upcoming weld test when they go to get a job.  There was a few more items to the email that we touched on.  It was fun to look back to where we came from and how we look at things differently today.  If you were to go back to school tomorrow would you run the padded bead plate differently then you did while you were there?  We hope you enjoy this episode and helps you in your class or makes you think back to when you were green.  Enjoy!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Thank you to our Sponsor for this episode BugO Systems!    Bugo Systems provides operator-controlled mechanized solutions for your welding, cutting, and custom solutions. Visit them at www.bugo.com       Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Adams Industrial, Andy Katanic, Anthony Chrisomalis, Bibli, Brandon Parry, Cory Dobson, Datum.build, David Doherty, Demented Metal Werkz, Forrever Endeavors, Gamble Garage, RoboVent, H4 Fab Works, Jacob Elder, Jacob marple, Jimi Luck, Kyle Lenker, Lick Skillet Fab, Marcus Hansen, Mike Howe, L&amp;N Welding, Noe Sanjuan, Pick's Fab, Steven Funk, Richard Black, Ricks Welding Service, S&amp;S Metal Fabrication, Scott Tasso, Shane Gunnin, Smashboogie 4x4, Smith Industries, Unobtainium Welding, Veteran Welding Co, Walter Oglesby, William Herman, Yusuf Khan.    Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum       Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Thank you for listening to episode 130 of the Welding Tips and Tricks Podcast!  We got an email asking how they can maximize the time they're in welding school and what to expect for an upcoming weld test when they go to get a job.  There was a few more items to the email that we touched on.  It was fun to look back to where we came from and how we look at things differently today.  If you were to go back to school tomorrow would you run the padded bead plate differently then you did while you were there?  We hope you enjoy this episode and helps you in your class or makes you think back to when you were green.  Enjoy!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Thank you to our Sponsor for this episode BugO Systems!   Bugo Systems provides operator-controlled mechanized solutions for your welding, cutting, and custom solutions. Visit them at <a href="http://www.bugo.com/" rel="noopener nofollow" target="_blank">www.bugo.com</a>     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to <a href="https://www.patreon.com/Weldingtipsandtrickspodcast" rel="nofollow" target="_blank">www.patreon.com/weldingtipsandtrickspodcast</a>. Everyone there is greatly appreciated. This months top supporters of the show are Adams Industrial, Andy Katanic, Anthony Chrisomalis, Bibli, Brandon Parry, Cory Dobson, Datum.build, David Doherty, Demented Metal Werkz, Forrever Endeavors, Gamble Garage, RoboVent, H4 Fab Works, Jacob Elder, Jacob marple, Jimi Luck, Kyle Lenker, Lick Skillet Fab, Marcus Hansen, Mike Howe, L&amp;N Welding, Noe Sanjuan, Pick's Fab, Steven Funk, Richard Black, Ricks Welding Service, S&amp;S Metal Fabrication, Scott Tasso, Shane Gunnin, Smashboogie 4x4, Smith Industries, Unobtainium Welding, Veteran Welding Co, Walter Oglesby, William Herman, Yusuf Khan.    Welding Tips and Tricks T-Shirts     Available at <a href="https://weldingtipsandtrickspodcast.com/" rel="nofollow" target="_blank">Weldingtipsandtrickspodcast.com </a>  Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where Can You Find the Welding Tips and Tricks Forum?   <a href="https://forum.weldingtipsandtricks.com/" rel="nofollow" target="_blank">Welding Tips and Tricks Forum</a>       Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           <a href="http://www.weldingtipsandtricks.com/" rel="nofollow" target="_blank">http://www.weldingtipsandtricks.com/</a>                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     <a href="http://www.superiorweldandfab.com/" rel="nofollow" target="_blank">http://www.superiorweldandfab.com/</a>                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        <a href="http://www.crummywelding.com/" rel="nofollow" target="_blank">http://www.crummywelding.com/</a>                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to <a href="http://superiorweldandfabsupply.com" rel="nofollow" target="_blank">superiorweldandfabsupply.com</a> to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link <a href="http://weldmongerstore.com/" rel="nofollow" target="_blank">http://weldmongerstore.com</a>/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Getting the most out of your Class

Hi and Thank you for listening to episode 20 of the Welding Tips and Tricks Podcast.  This this episode we wanted to talk about Pulse welding with Tig.  We discuss what all those settings mean, where it's useful, and our thoughts on pulse welding.  So hit download, pop those earbuds in, hit play, drop your hood, and enjoy!      Remember to subscribe to the podcast on your favorite platform and leave us a comment.  It really helps us out in the ranking on iTunes!  Our goal, with your help, is to be the best educational podcast for the trades on all platforms.  We really appreciate all the support we have been getting and it helps us keep moving for with this podcast!    Like what you hear? Would you like to help support the Welding Tips &amp; Tricks Podcast? We now have a page over on Patreon. You can be Patron of our podcast at many levels and rewards for those levels. The three of us love helping the welding community but there are costs involved in producing it. Go over to www.patreon.com/weldingtipsandtrickspodcast and become one of our Patrons. Every dollar helps and we sincerely appreciate it.  Our top Patron supporter this month is Dave Horvath!   Thanks,   Jonathan, Roy and Jody   Show Notes and Times    0:00-1:55            Introduction 1:55-5:57            Good times to use pulse 5:57-7:21            Rhythm 7:21-9:05            A Crutch?  9:05-10:25          Decisions  10:25-11:41        Effects of the puddle  11:41-14:33        What do the settings mean 14:33-15:37        Tig Perfect  15:37-17:38        How to think about a wave form 17:38-19:18        Tig Perfect wave form 19:18-21:14        1 pps training  21:14-22:21        Turn table pulsing 22:21-25:39         Why pump the pedal? 25:39-28:52         Setting the amps to pulse 28:52-34:13         Setting to start with pulse 34:13-36:28         High speed pulsing  36:28-37:40         Bad settings 37:40-38:37         Automated pulsing 38:37-43:38         Orbital Welding 43:38-45:30         Annoying frequency settings 45:30-48:12         Making a difference on a test 48:12-52:40         Going full circle  52:40-58:11         Write it down! 58:11-1:00:31      Pin point an arc with Tig Perfect 1:00:31-1:01:40   Can be noisy 1:01:40-1:03:29   Edge beads 1:03:29-1:06:24   Wrapping it up 1:06:24-1:07:32   Closing     Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.      We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram   Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.   This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!   Podcast music can be found at https://www.youtube.com/watch?v=j3UyYZ85Tiw Doctor Vox -Endgames

Hi and Thank you for listening to episode 20 of the Welding Tips and Tricks Podcast.  This this episode we wanted to talk about Pulse welding with Tig.  We discuss what all those settings mean, where it's useful, and our thoughts on pulse welding.  So hit download, pop those earbuds in, hit play, drop your hood, and enjoy!      Remember to subscribe to the podcast on your favorite platform and leave us a comment.  It really helps us out in the ranking on iTunes!  Our goal, with your help, is to be the best educational podcast for the trades on all platforms.  We really appreciate all the support we have been getting and it helps us keep moving for with this podcast!   Like what you hear? Would you like to help support the Welding Tips &amp; Tricks Podcast? We now have a page over on Patreon. You can be Patron of our podcast at many levels and rewards for those levels. The three of us love helping the welding community but there are costs involved in producing it. Go over to <a href="http://www.patreon.com/weldingtipsandtrickspodcast" rel="nofollow" target="_blank">www.patreon.com/weldingtipsandtrickspodcast</a> and become one of our Patrons. Every dollar helps and we sincerely appreciate it.  Our top Patron supporter this month is Dave Horvath!   Thanks,   Jonathan, Roy and Jody Show Notes and Times   <ul> <li>0:00-1:55            Introduction</li> <li>1:55-5:57            Good times to use pulse</li> <li>5:57-7:21            Rhythm</li> <li>7:21-9:05            A Crutch? </li> <li>9:05-10:25          Decisions </li> <li>10:25-11:41        Effects of the puddle </li> <li>11:41-14:33        What do the settings mean</li> <li>14:33-15:37        Tig Perfect </li> <li>15:37-17:38        How to think about a wave form</li> <li>17:38-19:18        Tig Perfect wave form</li> <li>19:18-21:14        1 pps training </li> <li>21:14-22:21        Turn table pulsing</li> <li>22:21-25:39         Why pump the pedal?</li> <li>25:39-28:52         Setting the amps to pulse</li> <li>28:52-34:13         Setting to start with pulse</li> <li>34:13-36:28         High speed pulsing </li> <li>36:28-37:40         Bad settings</li> <li>37:40-38:37         Automated pulsing</li> <li>38:37-43:38         Orbital Welding</li> <li>43:38-45:30         Annoying frequency settings</li> <li>45:30-48:12         Making a difference on a test</li> <li>48:12-52:40         Going full circle </li> <li>52:40-58:11         Write it down!</li> <li>58:11-1:00:31      Pin point an arc with Tig Perfect</li> <li>1:00:31-1:01:40   Can be noisy</li> <li>1:01:40-1:03:29   Edge beads</li> <li>1:03:29-1:06:24   Wrapping it up</li> <li>1:06:24-1:07:32   Closing </li> </ul>   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           <a href="http://www.weldingtipsandtricks.com/" rel="nofollow" target="_blank">http://www.weldingtipsandtricks.com/</a>                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     <a href="http://www.superiorweldandfab.com/" rel="nofollow" target="_blank">http://www.superiorweldandfab.com/</a>                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        <a href="http://www.crummywelding.com/" rel="nofollow" target="_blank">http://www.crummywelding.com/</a>                              @CrummyWelding on Instagram Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link <a href="http://weldmongerstore.com/" rel="nofollow" target="_blank">http://weldmongerstore.com/</a>.  All of which are great tools to have in your job toolbox and also your home shop box. This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!  Podcast music can be found at <a href="https://www.youtube.com/watch?v=j3UyYZ85Tiw" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=j3UyYZ85Tiw</a> Doctor Vox -Endgames

Welding Tips and Tricks Podcast Episode 20 Pulse Tig

Thank you for listening to episode 159 of the Welding Tips and Tricks Podcast.  For this episode we thought it would be fun to talk about Shop Layouts.  There are many different types of shops and how they are laid out can make a big difference in whether or not they are efficient or not. We talk about shops we've worked in and how we would like to see our shops in the future.  Hope this episode helps you stop and look at how your shop is laid out and possibly spark an interest in you to move some things around!  Enjoy!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      We'd like to Thank our Sponsor for this Episode!    Clash of the Grinders by 3M       Do you think you have what it takes to be the fastest grinder in America?  Here's your chance to show what you've got!  This year at Fabtech 2019 in Chicago 3M is putting on their Second Annual Clash of the Grinders!   12 selected participants will go head to head grinding 3 4 inch long welds to see who is the fastest!  To enter head over to 3m.com/PodClash and join the fun!          Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&amp;N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&amp;S Metal Fabrication, Diesel Repair Services.      Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Thank you for listening to episode 159 of the Welding Tips and Tricks Podcast.  For this episode we thought it would be fun to talk about Shop Layouts.  There are many different types of shops and how they are laid out can make a big difference in whether or not they are efficient or not. We talk about shops we've worked in and how we would like to see our shops in the future.  Hope this episode helps you stop and look at how your shop is laid out and possibly spark an interest in you to move some things around!  Enjoy!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      We'd like to Thank our Sponsor for this Episode!    Clash of the Grinders by 3M      Do you think you have what it takes to be the fastest grinder in America?  Here's your chance to show what you've got!  This year at Fabtech 2019 in Chicago 3M is putting on their Second Annual Clash of the Grinders!   12 selected participants will go head to head grinding 3 4 inch long welds to see who is the fastest!  To enter head over to <a href="https://engage.3m.com/3mclash?utm_term=sibg-asd-na-en_us-ba-3mclash-offa-podcast-learn-jul19-na&amp;utm_medium=redirect&amp;utm_source=vanity-url&amp;utm_campaign=3m.com/podclash" rel="nofollow" target="_blank">3m.com/PodClash</a> and join the fun!         Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to <a href="https://www.patreon.com/Weldingtipsandtrickspodcast" rel="nofollow" target="_blank">www.patreon.com/weldingtipsandtrickspodcast</a>. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, <a href="http://Yourwelder.com" rel="nofollow" target="_blank">Yourwelder.com</a>, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&amp;N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&amp;S Metal Fabrication, Diesel Repair Services.      Welding Tips and Tricks T-Shirts     Available at <a href="https://weldingtipsandtrickspodcast.com/" rel="nofollow" target="_blank">Weldingtipsandtrickspodcast.com </a>  Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   <a href="https://forum.weldingtipsandtricks.com/" rel="nofollow" target="_blank">Welding Tips and Tricks Forum</a>   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           <a href="http://www.weldingtipsandtricks.com/" rel="nofollow" target="_blank">http://www.weldingtipsandtricks.com/</a>                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     <a href="http://www.superiorweldandfab.com/" rel="nofollow" target="_blank">http://www.superiorweldandfab.com/</a>                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        <a href="http://www.crummywelding.com/" rel="nofollow" target="_blank">http://www.crummywelding.com/</a>                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to <a href="http://superiorweldandfabsupply.com" rel="nofollow" target="_blank">superiorweldandfabsupply.com</a> to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link <a href="http://weldmongerstore.com/" rel="nofollow" target="_blank">http://weldmongerstore.com</a>/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Shop Layout

Ryan Hussey

Thank you for listening to episode 164 of the Welding Tips and Tricks Podcast!  For this weeks guest we had a fun chat with @Bagofwelds on Instagram aka Ryan Hussey.  Ryan works in a very interesting part of the welding world and recently changed jobs to an even more interesting job.  We had fun chatting about the parts Ryan welds on and how he found himself where he is today.  We hope this episode might help open your eyes to just how vast this welding world is we work/live in.  Enjoy!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      We'd like to Thank our Sponsor for this Episode!    Clash of the Grinders by 3M       Thank you to Clash of the Grinders for sponsoring this episode!  Hopefully you were able to enter to get a chance to be selected as one of the 12 competitors for this compition that is going to be held on November 12th at Fabtech 2019.  If you're not going to able to make it to Fabtech you still can tune in to watch everything live on Facebook and YouTube!  Be sure to check out s.3m.com/cotg for up to date information!           We would also like to Thank Bugo Systems for sponsoring this episode!  For all your mechanized  welding and cutting needs be sure to check out Bugo.com to see the latest and greatest units!           Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&amp;N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&amp;S Metal Fabrication, Diesel Repair Services.        Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Ryan?   On Instagram @Bagofwelds   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Thank you for listening to episode 164 of the Welding Tips and Tricks Podcast!  For this weeks guest we had a fun chat with @Bagofwelds on Instagram aka Ryan Hussey.  Ryan works in a very interesting part of the welding world and recently changed jobs to an even more interesting job.  We had fun chatting about the parts Ryan welds on and how he found himself where he is today.  We hope this episode might help open your eyes to just how vast this welding world is we work/live in.  Enjoy!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      We'd like to Thank our Sponsor for this Episode!    Clash of the Grinders by 3M      Thank you to Clash of the Grinders for sponsoring this episode!  Hopefully you were able to enter to get a chance to be selected as one of the 12 competitors for this compition that is going to be held on November 12th at Fabtech 2019.  If you're not going to able to make it to Fabtech you still can tune in to watch everything live on Facebook and YouTube!  Be sure to check out <a href="http://s.3m.com/cotg" rel="nofollow" target="_blank">s.3m.com/cotg</a> for up to date information!         We would also like to Thank Bugo Systems for sponsoring this episode!  For all your mechanized  welding and cutting needs be sure to check out <a href="https://bugo.com/" rel="noopener nofollow" target="_blank">Bugo.com</a> to see the latest and greatest units!          Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to <a href="https://www.patreon.com/Weldingtipsandtrickspodcast" rel="noopener nofollow" target="_blank">www.patreon.com/weldingtipsandtrickspodcast</a>. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, <a href="http://Yourwelder.com" rel="nofollow" target="_blank">Yourwelder.com</a>, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&amp;N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&amp;S Metal Fabrication, Diesel Repair Services.        Welding Tips and Tricks T-Shirts     Available at <a href="https://weldingtipsandtrickspodcast.com/" rel="noopener nofollow" target="_blank">Weldingtipsandtrickspodcast.com </a>  Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   <a href="https://forum.weldingtipsandtricks.com/" rel="noopener nofollow" target="_blank">Welding Tips and Tricks Forum</a>   Where can you find Ryan?   On Instagram <a href="https://www.instagram.com/bagofwelds/" rel="nofollow" target="_blank">@Bagofwelds</a>   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at <a href="mailto:WeldingTipsandTricksPodcast@gmail.com" rel="noopener">WeldingTipsandTricksPodcast@gmail.com</a>.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           <a href="http://www.weldingtipsandtricks.com/" rel="noopener nofollow" target="_blank">http://www.weldingtipsandtricks.com/</a>                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     <a href="http://www.superiorweldandfab.com/" rel="noopener nofollow" target="_blank">http://www.superiorweldandfab.com/</a>                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        <a href="http://www.crummywelding.com/" rel="noopener nofollow" target="_blank">http://www.crummywelding.com/</a>                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to <a href="http://superiorweldandfabsupply.com/" rel="noopener nofollow" target="_blank">superiorweldandfabsupply.com</a> to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link <a href="http://weldmongerstore.com/" rel="noopener nofollow" target="_blank">http://weldmongerstore.com</a>/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!

Bag of Welds  aka Ryan Hussey

Thank you for listening to episode 131 of the Welding Tips and Tricks Podcast!  For this episode we wanted to talk about the not so great parts of running your own business.  Not to be a downer but to let you know that it can be a real struggle at times.  If you're thinking of stepping out on your own these are real things that you'll deal with and if you're already on your own you're not alone.  We hope that this chat opens you're eyes a little more to the other side of the table!  Enjoy!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Thank you to our Sponsor for this episode BugO Systems!    Bugo Systems provides operator-controlled mechanized solutions for your welding, cutting, and custom solutions. Visit them at www.bugo.com       Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Adams Industrial, Andy Katanic, Anthony Chrisomalis, Bibli, Brandon Parry, Cory Dobson, Datum.build, David Doherty, Demented Metal Werkz, Forrever Endeavors, Gamble Garage, RoboVent, H4 Fab Works, Jacob Elder, Jacob marple, Jimi Luck, Kyle Lenker, Lick Skillet Fab, Marcus Hansen, Mike Howe, L&amp;N Welding, Noe Sanjuan, Pick's Fab, Steven Funk, Richard Black, Ricks Welding Service, S&amp;S Metal Fabrication, Scott Tasso, Shane Gunnin, Smashboogie 4x4, Smith Industries, Unobtainium Welding, Veteran Welding Co, Walter Oglesby, William Herman, Yusuf Khan.    Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum       Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake

Thank you for listening to episode 131 of the Welding Tips and Tricks Podcast!  For this episode we wanted to talk about the not so great parts of running your own business.  Not to be a downer but to let you know that it can be a real struggle at times.  If you're thinking of stepping out on your own these are real things that you'll deal with and if you're already on your own you're not alone.  We hope that this chat opens you're eyes a little more to the other side of the table!  Enjoy!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Thank you to our Sponsor for this episode BugO Systems!   Bugo Systems provides operator-controlled mechanized solutions for your welding, cutting, and custom solutions. Visit them at <a href="http://www.bugo.com/" rel="noopener nofollow" target="_blank">www.bugo.com</a>     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to <a href="https://www.patreon.com/Weldingtipsandtrickspodcast" rel="nofollow" target="_blank">www.patreon.com/weldingtipsandtrickspodcast</a>. Everyone there is greatly appreciated. This months top supporters of the show are Adams Industrial, Andy Katanic, Anthony Chrisomalis, Bibli, Brandon Parry, Cory Dobson, Datum.build, David Doherty, Demented Metal Werkz, Forrever Endeavors, Gamble Garage, RoboVent, H4 Fab Works, Jacob Elder, Jacob marple, Jimi Luck, Kyle Lenker, Lick Skillet Fab, Marcus Hansen, Mike Howe, L&amp;N Welding, Noe Sanjuan, Pick's Fab, Steven Funk, Richard Black, Ricks Welding Service, S&amp;S Metal Fabrication, Scott Tasso, Shane Gunnin, Smashboogie 4x4, Smith Industries, Unobtainium Welding, Veteran Welding Co, Walter Oglesby, William Herman, Yusuf Khan.    Welding Tips and Tricks T-Shirts     Available at <a href="https://weldingtipsandtrickspodcast.com/" rel="nofollow" target="_blank">Weldingtipsandtrickspodcast.com </a>  Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where Can You Find the Welding Tips and Tricks Forum?   <a href="https://forum.weldingtipsandtricks.com/" rel="nofollow" target="_blank">Welding Tips and Tricks Forum</a>       Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           <a href="http://www.weldingtipsandtricks.com/" rel="nofollow" target="_blank">http://www.weldingtipsandtricks.com/</a>                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     <a href="http://www.superiorweldandfab.com/" rel="nofollow" target="_blank">http://www.superiorweldandfab.com/</a>                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        <a href="http://www.crummywelding.com/" rel="nofollow" target="_blank">http://www.crummywelding.com/</a>                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to <a href="http://superiorweldandfabsupply.com" rel="nofollow" target="_blank">superiorweldandfabsupply.com</a> to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link <a href="http://weldmongerstore.com/" rel="nofollow" target="_blank">http://weldmongerstore.com</a>/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake

Start Your Own Business, They Said, It will be Fun...

Hi and Thank you for listening to episode 43 of the Welding Tips and Tricks Podcast!  For this weeks episode we had a great time chatting with Barbie Parsons aka Barbie The Welder.  During our chat Barbie talks about the road that lead to where she is as an artist today.  Lots of ups and downs along with a bunch of inspirational moments in her life.  So be sure download, pop those earbuds in, hit play, drop your hood, and enjoy.    Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Philip Kaminski, Scott Silva, Rick Alotto, Jacob Marple, Jacob Elder, and Dave Horvath.  Where can you find Barbie?   On Instagram @barbiethewelder On the Web www.barbiethewelder.com      Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.      We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.         Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram   Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.   This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!    New music brought to you by Jody's son Jake!

Hi and Thank you for listening to episode 43 of the Welding Tips and Tricks Podcast!  For this weeks episode we had a great time chatting with Barbie Parsons aka Barbie The Welder.  During our chat Barbie talks about the road that lead to where she is as an artist today.  Lots of ups and downs along with a bunch of inspirational moments in her life.  So be sure download, pop those earbuds in, hit play, drop your hood, and enjoy.    Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to <a href="http://www.patreon.com/weldingtipsandtrickspodcast" rel="noopener nofollow" target="_blank">www.patreon.com/weldingtipsandtrickspodcast</a>. Everyone there is greatly appreciated. This months top supporters of the show are Philip Kaminski, Scott Silva, Rick Alotto, Jacob Marple, Jacob Elder, and <a href="https://www.patreon.com/user?u=4393383" rel="noopener nofollow" target="_blank">Dave Horvath</a>. Where can you find Barbie?   On Instagram <a href="https://www.instagram.com/barbiethewelder/" rel="nofollow" target="_blank">@barbiethewelder</a> On the Web <a href="http://www.barbiethewelder.com/" rel="nofollow" target="_blank">www.barbiethewelder.com</a>   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at WeldingTipsandTricksPodcast@gmail.com.     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           <a href="http://www.weldingtipsandtricks.com/" rel="nofollow" target="_blank">http://www.weldingtipsandtricks.com/</a>                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     <a href="http://www.superiorweldandfab.com/" rel="nofollow" target="_blank">http://www.superiorweldandfab.com/</a>                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        <a href="http://www.crummywelding.com/" rel="nofollow" target="_blank">http://www.crummywelding.com/</a>                              @CrummyWelding on Instagram Interested in weld purging equipment as discussed in this show? Head over to <a href="https://www.superiorweldandfabsupply.com/" rel="noopener nofollow" target="_blank">superiorweldandfabsupply.com</a> to check out our complete selection of weld purging tools to help you make those perfect welds. Where can you find a Tig Finger? You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link <a href="http://weldmongerstore.com/" rel="noopener nofollow" target="_blank">http://weldmongerstore.com/</a>.  All of which are great tools to have in your job toolbox and also your home shop box. This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!  New music brought to you by Jody's son Jake!

Welding Tips and Tricks Podcast Episode 43  Barbie The Welder

The best podcast episodes of the most interesting stories and things. From skyping someone while they're in space, to tracking down and meeting a telephone scammer in person, to the story of a Galapagos. These episodes will keep you and all your friends entertained and captivated for hours. Learn something new in every episode! Add episodes you're interested into your queue below!

Best Episodes: Interesting Stories & Things

The best podcast episodes on physical health. Episodes talk about your diet, sleep, exercise and all the things that people do to improve their physical health and live a healthier life. This topic is for everyone, with applications in all of our everyday lives. Add episodes you're interested into your queue below!