Help us grow on Patreon https://www.patreon.com/CreatorsCollectiveHuge thank you to All of our Patrons! Especially Darren Mattes, Caleb Harris of YouCanMakeThisToo and Judith Grass.New Patreons:You can listen to us on iTunes, Google Play, SoundCloud and many other placesYou can join us live Thursdays at 10 AM eastern on the Creators Collective Podcast https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBgWhat’s new/ what are we working on?Zack: movingWill: Finished the table, custom window jam extensions,trying to find inspirationJames: the BED!! And Ulu knife, bur puzzle, tote and knob, and more.Q&amp;A:Rasmus Loen Steensgaard: ​What's the most daunting project you have taken upon yourself, and completed successfully?Whit Oyler: What would you say was your first real project?Joke of the weekWhat did the tree do when his local bank closed? He started a new branchWhat’s new/what are we watching/reading?Will:Andy Rawls Dresser build https://www.youtube.com/watch?v=F37NWLaNUW4James: Peter Brown Copper coating plywood: https://www.youtube.com/watch?v=fFhJaz9iEW0&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=18Zack: The craftsman legacy: https://amzn.to/2SXnqqQFavorite tool/product this week?Zack: BIG compressor.Will: General Finishes Arm-r-seal https://amzn.to/2KaQcS7James:Hand Screw Clamp: https://amzn.to/2LUrN5jHostsJames Wright: Wood By Wright https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHgZack Herberholz: ZH Fabrication https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7wWilliam Walker: Wm. Walker Co. https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCwSHOW NOTESIntro and outro recorded and produced by Jason Wright http://withamic.com/

Help us grow on Patreon <a href="https://www.patreon.com/CreatorsCollective" rel="nofollow" target="_blank">https://www.patreon.com/CreatorsCollective</a>Huge thank you to All of our Patrons! Especially Darren Mattes, Caleb Harris of YouCanMakeThisToo and Judith Grass.New Patreons:You can listen to us on iTunes, Google Play, SoundCloud and many other placesYou can join us live Thursdays at 10 AM eastern on the Creators Collective Podcast <a href="https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBg" rel="nofollow" target="_blank">https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBg</a>What’s new/ what are we working on?Zack: movingWill: Finished the table, custom window jam extensions,trying to find inspirationJames: the BED!! And Ulu knife, bur puzzle, tote and knob, and more.Q&amp;A:Rasmus Loen Steensgaard: ​What's the most daunting project you have taken upon yourself, and completed successfully?Whit Oyler: What would you say was your first real project? Joke of the weekWhat did the tree do when his local bank closed? He started a new branchWhat’s new/what are we watching/reading?Will:Andy Rawls Dresser build <a href="https://www.youtube.com/watch?v=F37NWLaNUW4" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=F37NWLaNUW4</a>James: Peter Brown Copper coating plywood: <a href="https://www.youtube.com/watch?v=fFhJaz9iEW0&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=18" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=fFhJaz9iEW0&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=18</a>Zack: The craftsman legacy: <a href="https://amzn.to/2SXnqqQ" rel="nofollow" target="_blank">https://amzn.to/2SXnqqQ</a> Favorite tool/product this week?Zack: BIG compressor.Will: General Finishes Arm-r-seal <a href="https://amzn.to/2KaQcS7" rel="nofollow" target="_blank">https://amzn.to/2KaQcS7</a>James:Hand Screw Clamp: <a href="https://amzn.to/2LUrN5j" rel="nofollow" target="_blank">https://amzn.to/2LUrN5j</a>HostsJames Wright: Wood By Wright <a href="https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg</a>Zack Herberholz: ZH Fabrication <a href="https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w</a>William Walker: Wm. Walker Co. <a href="https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw</a> SHOW NOTESIntro and outro recorded and produced by Jason Wright <a href="http://withamic.com/" rel="nofollow" target="_blank">http://withamic.com/</a>

#127 We do exist 

In episode #126 We talk about the new podcast schedule, Changes in style, Moving shops. How changing shops effects the outcome of projects.Help us grow on Patreon https://www.patreon.com/CreatorsCollectiveHuge thank you to All of our Patrons! Especially Darren Mattes, Caleb Harris of YouCanMakeThisToo and Judith Grass.You can listen to us on iTunes, Google Play, SoundCloud and many other placesYou can join us live Thursdays at 10 AM eastern on the Creators Collective Podcast https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBgWhat’s new/ what are we working on?Zack: Moving and more movingWill: VA school of metal, researching winching logs, vanity, thinking about a sawmillJames: Staying alive Sharpening a molding planeQ&amp;A: Handcrafted by Auns: Obviously Zack is about to find out, but do you think that having to rearrange or move your shop would push you towards producing different styles of products?Joke of the weekWhat’s new/what are we watching/reading?Will: Different log winching techniques: https://www.youtube.com/watch?v=qi68j_WHXhMJames: Mr Chickadee: https://www.youtube.com/watch?v=znAsDwolf10&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=3Zack: The Thought of moving!!!!Favorite tool/product this week?Zack:Will: Grizzly G454Z 20” spiral head planerJames: Molding plane!HostsJames Wright: Wood By Wright https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHgZack Herberholz: ZH Fabrication https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7wWilliam Walker: Wm. Walker Co. https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCwSHOW NOTESIntro and outro recorded and produced by Jason Wright http://withamic.com/

In episode #126 We talk about the new podcast schedule, Changes in style, Moving shops. How changing shops effects the outcome of projects.Help us grow on Patreon <a href="https://www.patreon.com/CreatorsCollective" rel="nofollow" target="_blank">https://www.patreon.com/CreatorsCollective</a>Huge thank you to All of our Patrons! Especially Darren Mattes, Caleb Harris of YouCanMakeThisToo and Judith Grass.You can listen to us on iTunes, Google Play, SoundCloud and many other placesYou can join us live Thursdays at 10 AM eastern on the Creators Collective Podcast <a href="https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBg" rel="nofollow" target="_blank">https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBg</a>What’s new/ what are we working on?Zack: Moving and more movingWill: VA school of metal, researching winching logs, vanity, thinking about a sawmillJames: Staying alive Sharpening a molding planeQ&amp;A: Handcrafted by Auns: Obviously Zack is about to find out, but do you think that having to rearrange or move your shop would push you towards producing different styles of products?Joke of the weekWhat’s new/what are we watching/reading?Will: Different log winching techniques: <a href="https://www.youtube.com/watch?v=qi68j_WHXhM" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=qi68j_WHXhM</a>James: Mr Chickadee: <a href="https://www.youtube.com/watch?v=znAsDwolf10&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=3" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=znAsDwolf10&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=3</a>Zack: The Thought of moving!!!!Favorite tool/product this week?Zack:Will: Grizzly G454Z 20” spiral head planerJames: Molding plane!HostsJames Wright: Wood By Wright <a href="https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg</a>Zack Herberholz: ZH Fabrication <a href="https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w</a>William Walker: Wm. Walker Co. <a href="https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw</a> SHOW NOTESIntro and outro recorded and produced by Jason Wright <a href="http://withamic.com/" rel="nofollow" target="_blank">http://withamic.com/</a>

#126 Should we stop podcasting?

In episode #124 We talk about houses falling through, Makers Centeral, Getting the drive to get things done.Help us grow on Patreon https://www.patreon.com/CreatorsCollectiveHuge thank you to All of our Patrons! Especially Darren Mattes, Caleb Harris of YouCanMakeThisToo and Judith Grass.New Patreons:You can listen to us on iTunes, Google Play, SoundCloud and many other placesYou can join us live Thursdays at 10 AM eastern on the Creators Collective Podcast https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBgWhat’s new/ what are we working on?Zack: Moving and houses falling through!Will: Everything- basement, cantina, stairs, table, console,James: Makers Central and London!Q&amp;A: Creators Photo ChallengeDue next time:James: whiskeymiketx: https://www.instagram.com/p/BxgIHxFHqzc/Fernibcreations: https://www.instagram.com/p/Bw70emUAIYm/Joke of the week: Mike Tabar​Whats the best thing about Switzerland? I don't know but the flag is a big plus.What’s new/what are we watching/reading?Will: Nothing!!James: The Beach Captain https://www.youtube.com/watch?v=ZsIUc9dxv5wZack: AskCast, and looking at bad instigram feeds.Favorite tool/product this week?Zack:Will: Starbond Adhesives - https://www.starbond.com?rfsn=2331452.022db6James: DFM Dowel Plate https://www.amazon.com/gp/product/B07Q4RY3T7?ie=UTF8HostsJames Wright: Wood By Wright https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHgZack Herberholz: ZH Fabrication https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7wWilliam Walker: Wm. Walker Co. https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCwSHOW NOTESIntro and outro recorded and produced by Jason Wright http://withamic.com/

In episode #124 We talk about houses falling through, Makers Centeral, Getting the drive to get things done.Help us grow on Patreon <a href="https://www.patreon.com/CreatorsCollective" rel="nofollow" target="_blank">https://www.patreon.com/CreatorsCollective</a>Huge thank you to All of our Patrons! Especially Darren Mattes, Caleb Harris of YouCanMakeThisToo and Judith Grass.New Patreons:You can listen to us on iTunes, Google Play, SoundCloud and many other placesYou can join us live Thursdays at 10 AM eastern on the Creators Collective Podcast <a href="https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBg" rel="nofollow" target="_blank">https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBg</a>What’s new/ what are we working on?Zack: Moving and houses falling through!Will: Everything- basement, cantina, stairs, table, console,James: Makers Central and London!Q&amp;A: Creators Photo ChallengeDue next time:James: whiskeymiketx: <a href="https://www.instagram.com/p/BxgIHxFHqzc/" rel="nofollow" target="_blank">https://www.instagram.com/p/BxgIHxFHqzc/</a>Fernibcreations: <a href="https://www.instagram.com/p/Bw70emUAIYm/" rel="nofollow" target="_blank">https://www.instagram.com/p/Bw70emUAIYm/</a> Joke of the week: Mike Tabar​Whats the best thing about Switzerland? I don't know but the flag is a big plus.What’s new/what are we watching/reading?Will: Nothing!!James: The Beach Captain <a href="https://www.youtube.com/watch?v=ZsIUc9dxv5w" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=ZsIUc9dxv5w</a>Zack: AskCast, and looking at bad instigram feeds.Favorite tool/product this week?Zack:Will: Starbond Adhesives - <a href="https://www.starbond.com?rfsn=2331452.022db6" rel="nofollow" target="_blank">https://www.starbond.com?rfsn=2331452.022db6</a>James: DFM Dowel Plate <a href="https://www.amazon.com/gp/product/B07Q4RY3T7?ie=UTF8" rel="nofollow" target="_blank">https://www.amazon.com/gp/product/B07Q4RY3T7?ie=UTF8</a>HostsJames Wright: Wood By Wright <a href="https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg</a>Zack Herberholz: ZH Fabrication <a href="https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w</a>William Walker: Wm. Walker Co. <a href="https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw</a> SHOW NOTESIntro and outro recorded and produced by Jason Wright <a href="http://withamic.com/" rel="nofollow" target="_blank">http://withamic.com/</a>

#124 We Go WAY off the Rails!

Matt Cremona

In episode #123 we have special guest Matt Cremona, All going to Makers Central. Buying a huge truck. Zack moving and so much moreHelp us grow on Patreon https://www.patreon.com/CreatorsCollectiveHuge thank you to All of our Patrons! Especially Darren Mattes, Caleb Harris of YouCanMakeThisToo and Judith Grass.New Patreons:You can listen to us on iTunes, Google Play, SoundCloud and many other placesYou can join us live Thursdays at 10 AM eastern on the Creators Collective Podcast https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBgWhat’s new/ what are we working on?Matt: Hand tool cabinet https://www.youtube.com/watch?v=ErEhwXlJKTE Makers CentralZack: Flights and Makers Central, and moving!James:Q&amp;A: scott walmsley: ​are there gonna be any veneering projects in the guild now you have a vac bag would love to see your take on a demilune tableRichard Maske​: I want to start slabbing. What should I buy to use with a 18" chainsaw to slab small logs?Make Brooklyn: ​Matt: Are you planning to learn to play the guitar following your course at crimson?Creators Photo ChallengeDue next time:Joke of the weekMy wife is really mad at the fact that I have no sense of direction. So I packed up my stuff and right.What’s new/what are we watching/reading?Matt: Want to buy a truck:James: How to make a swiss Cooper Hand Made Bucket: https://www.youtube.com/watch?v=v3BWyzth1_0&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=13Zack: Moving!!!Favorite tool/product this week?Zack: Iso Tunes “ZHF”Matt:James: Scraper plane. https://amzn.to/2V8k3ScHostsJames Wright: Wood By Wright https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHgZack Herberholz: ZH Fabrication https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7wWilliam Walker: Wm. Walker Co. https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCwMatt Cremona: Matt Cremonahttps://www.youtube.com/channel/UCDpL0v-Ifie7u05lbfO3zJQSHOW NOTESIntro and outro recorded and produced by Jason Wright http://withamic.com/

In episode #123 we have special guest Matt Cremona, All going to Makers Central. Buying a huge truck. Zack moving and so much moreHelp us grow on Patreon <a href="https://www.patreon.com/CreatorsCollective" rel="nofollow" target="_blank">https://www.patreon.com/CreatorsCollective</a>Huge thank you to All of our Patrons! Especially Darren Mattes, Caleb Harris of YouCanMakeThisToo and Judith Grass.New Patreons:You can listen to us on iTunes, Google Play, SoundCloud and many other placesYou can join us live Thursdays at 10 AM eastern on the Creators Collective Podcast <a href="https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBg" rel="nofollow" target="_blank">https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBg</a>What’s new/ what are we working on?Matt: Hand tool cabinet <a href="https://www.youtube.com/watch?v=ErEhwXlJKTE" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=ErEhwXlJKTE</a> Makers CentralZack: Flights and Makers Central, and moving!James:Q&amp;A: scott walmsley: ​are there gonna be any veneering projects in the guild now you have a vac bag would love to see your take on a demilune tableRichard Maske​: I want to start slabbing. What should I buy to use with a 18" chainsaw to slab small logs?Make Brooklyn: ​Matt: Are you planning to learn to play the guitar following your course at crimson?Creators Photo ChallengeDue next time:Joke of the weekMy wife is really mad at the fact that I have no sense of direction. So I packed up my stuff and right.What’s new/what are we watching/reading?Matt: Want to buy a truck:James: How to make a swiss Cooper Hand Made Bucket: <a href="https://www.youtube.com/watch?v=v3BWyzth1_0&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=13" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=v3BWyzth1_0&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=13</a>Zack: Moving!!!Favorite tool/product this week?Zack: Iso Tunes “ZHF”Matt:James: Scraper plane. <a href="https://amzn.to/2V8k3Sc" rel="nofollow" target="_blank">https://amzn.to/2V8k3Sc</a>HostsJames Wright: Wood By Wright <a href="https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg</a>Zack Herberholz: ZH Fabrication <a href="https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w</a>William Walker: Wm. Walker Co. <a href="https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw</a>Matt Cremona: Matt Cremona<a href="https://www.youtube.com/channel/UCDpL0v-Ifie7u05lbfO3zJQ" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCDpL0v-Ifie7u05lbfO3zJQ</a> SHOW NOTESIntro and outro recorded and produced by Jason Wright <a href="http://withamic.com/" rel="nofollow" target="_blank">http://withamic.com/</a>

#123 Special Guest Matt Cremona 

Jonathan Katz-Moses

In episode #122 We talk about who is better at sharpening, how to store lumber outside. Hand powered CNC, and resawing all by hand!Help us grow on Patreon https://www.patreon.com/CreatorsCollectiveHuge thank you to All of our Patrons! Especially Darren Mattes, Caleb Harris of YouCanMakeThisToo and Judith Grass.New Patreons:You can listen to us on iTunes, Google Play, SoundCloud and many other placesYou can join us live Thursdays at 10 AM eastern on the Creators Collective Podcast https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBgWhat’s new/ what are we working on?Will: House stuff, thinking of new productsJames: Resawing again and again. Bed. Epoxy inlay liveKatz-moses:Q&amp;A: Creators Photo ChallengeDue next time: Do you love me or do you cactus!Joke of the weekWhat do you call a can opener that doesn’t work? A can’t opener!What’s new/what are we watching/reading?Will: My latest video on CA glue and Blue tape - https://www.youtube.com/watch?v=fTJ6dP1Im6AJames: Marble Machine X https://www.youtube.com/watch?v=1AEvQAg6TE0&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=3Katz-moses: Mike Boyd https://www.youtube.com/channel/UCIRiWCPZoUyZDbydIqitHtQFavorite tool/product this week?Will: Katz Moses Dovetail Jig http://bit.ly/2Pri1GXJames: Birds Mouth scroll tableKatz-moses: wood River Block plane https://amzn.to/2GxqN1XHostsJames Wright: Wood By Wright https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHgZack Herberholz: ZH Fabrication https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7wWilliam Walker: Wm. Walker Co. https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCwJonathan Katz-moses Woodworkinghttps://www.youtube.com/channel/UCXBNF-A7QlYT3tT-B9N4ElASHOW NOTESIntro and outro recorded and produced by Jason Wright http://withamic.com/

In episode #122 We talk about who is better at sharpening, how to store lumber outside. Hand powered CNC, and resawing all by hand!Help us grow on Patreon <a href="https://www.patreon.com/CreatorsCollective" rel="nofollow" target="_blank">https://www.patreon.com/CreatorsCollective</a>Huge thank you to All of our Patrons! Especially Darren Mattes, Caleb Harris of YouCanMakeThisToo and Judith Grass.New Patreons:You can listen to us on iTunes, Google Play, SoundCloud and many other placesYou can join us live Thursdays at 10 AM eastern on the Creators Collective Podcast <a href="https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBg" rel="nofollow" target="_blank">https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBg</a>What’s new/ what are we working on?Will: House stuff, thinking of new productsJames: Resawing again and again. Bed. Epoxy inlay liveKatz-moses:Q&amp;A: Creators Photo ChallengeDue next time: Do you love me or do you cactus!Joke of the weekWhat do you call a can opener that doesn’t work? A can’t opener!What’s new/what are we watching/reading?Will: My latest video on CA glue and Blue tape - <a href="https://www.youtube.com/watch?v=fTJ6dP1Im6A" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=fTJ6dP1Im6A</a>James: Marble Machine X <a href="https://www.youtube.com/watch?v=1AEvQAg6TE0&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=3" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=1AEvQAg6TE0&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=3</a>Katz-moses: Mike Boyd <a href="https://www.youtube.com/channel/UCIRiWCPZoUyZDbydIqitHtQ" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCIRiWCPZoUyZDbydIqitHtQ</a>Favorite tool/product this week?Will: Katz Moses Dovetail Jig <a href="http://bit.ly/2Pri1GX" rel="nofollow" target="_blank">http://bit.ly/2Pri1GX</a>James: Birds Mouth scroll tableKatz-moses: wood River Block plane <a href="https://amzn.to/2GxqN1X" rel="nofollow" target="_blank">https://amzn.to/2GxqN1X</a>HostsJames Wright: Wood By Wright <a href="https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg</a>Zack Herberholz: ZH Fabrication <a href="https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w</a>William Walker: Wm. Walker Co. <a href="https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw</a>Jonathan Katz-moses Woodworking<a href="https://www.youtube.com/channel/UCXBNF-A7QlYT3tT-B9N4ElA" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCXBNF-A7QlYT3tT-B9N4ElA</a> SHOW NOTESIntro and outro recorded and produced by Jason Wright <a href="http://withamic.com/" rel="nofollow" target="_blank">http://withamic.com/</a>

#122 Special guest Jonathan Katz-moses

In episode #121 we talk about the hammers that Zac is not making, new shirt idea, some of the best Creators Photo Challenge pictures yet, and Will loses it on the joke of the day.Help us grow on Patreon https://www.patreon.com/CreatorsCollectiveHuge thank you to All of our Patrons! Especially Darren Mattes, Caleb Harris of YouCanMakeThisToo and Judith Grass.NOT HAMMERS!You can listen to us on iTunes, Google Play, SoundCloud and many other placesYou can join us live Thursdays at 10 AM eastern on the Creators Collective Podcast https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBgWhat’s new/ what are we working on?Zack: NOT HAMMERS! Working on a walker.Will: wrapping up the media console, new handplane video, want to try a podlet, voice doppleganger - https://www.youtube.com/watch?v=HOIcEMACIdEJames: Bed: https://www.youtube.com/watch?v=Ue4NBL9Nmk0&amp;list=PLAbayqjimalGA2yhWx5WNzzZ7VIXJ5aMmBow Saws and frame sawsQ&amp;A: Creators Photo ChallengeDue next time: Do you love it or do you Cactus!Zack: Jake.sorensen.photography: Block Plane: https://www.instagram.com/p/BvuWneXBdvR/Sharktoothfabrication https://www.instagram.com/p/BvwQ0oBAW3-/Will: Jake Sorensen - https://www.instagram.com/p/BvuWneXBdvR/Sharktooth - https://www.instagram.com/p/BvwQ0oBAW3-/James: jerryyale84: Coffee Scoop https://www.instagram.com/p/Bvzuc4IAQWc/Jake.sorensen.photography: Block Plane: https://www.instagram.com/p/BvuWneXBdvR/Joke of the week63 Degrees North: ​JOKE: What's the difference between a good joke and a bad joke timing63 Degrees North: ​JOKE: I own the worlds worst thesaurus. Not only is it awful, it's awful.What’s new/what are we watching/reading?Will: Andy Rawls - https://www.youtube.com/watch?v=HThnKIC1oHwNatural Selection Studio - Podlets - https://www.instagram.com/p/BwFI5RhA-Na/James: 11foot8 bridge https://www.youtube.com/watch?v=TvxDhgDjVCA&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=13Zack: Chef’s table on netflex.Favorite tool/product this week?Zack: Ball peen hammer I just forged.Will: ⅜” upcut spiral bit - https://amzn.to/2It2RzAJames: Roubo Frame saw: https://www.youtube.com/watch?v=SC_hn3T9AqMHostsJames Wright: Wood By Wright https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHgZack Herberholz: ZH Fabrication https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7wWilliam Walker: Wm. Walker Co. https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCwSHOW NOTESIntro and outro recorded and produced by Jason Wright http://withamic.com/

In episode #121 we talk about the hammers that Zac is not making, new shirt idea, some of the best Creators Photo Challenge pictures yet, and Will loses it on the joke of the day.Help us grow on Patreon <a href="https://www.patreon.com/CreatorsCollective" rel="nofollow" target="_blank">https://www.patreon.com/CreatorsCollective</a>Huge thank you to All of our Patrons! Especially Darren Mattes, Caleb Harris of YouCanMakeThisToo and Judith Grass.NOT HAMMERS!You can listen to us on iTunes, Google Play, SoundCloud and many other placesYou can join us live Thursdays at 10 AM eastern on the Creators Collective Podcast <a href="https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBg" rel="nofollow" target="_blank">https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBg</a>What’s new/ what are we working on?Zack: NOT HAMMERS! Working on a walker.Will: wrapping up the media console, new handplane video, want to try a podlet, voice doppleganger - <a href="https://www.youtube.com/watch?v=HOIcEMACIdE" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=HOIcEMACIdE</a>James: Bed: <a href="https://www.youtube.com/watch?v=Ue4NBL9Nmk0&amp;list=PLAbayqjimalGA2yhWx5WNzzZ7VIXJ5aMm" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=Ue4NBL9Nmk0&amp;list=PLAbayqjimalGA2yhWx5WNzzZ7VIXJ5aMm</a>Bow Saws and frame sawsQ&amp;A: Creators Photo ChallengeDue next time: Do you love it or do you Cactus!Zack: Jake.sorensen.photography: Block Plane: <a href="https://www.instagram.com/p/BvuWneXBdvR/" rel="nofollow" target="_blank">https://www.instagram.com/p/BvuWneXBdvR/</a>Sharktoothfabrication <a href="https://www.instagram.com/p/BvwQ0oBAW3-/" rel="nofollow" target="_blank">https://www.instagram.com/p/BvwQ0oBAW3-/</a>Will: Jake Sorensen - <a href="https://www.instagram.com/p/BvuWneXBdvR/" rel="nofollow" target="_blank">https://www.instagram.com/p/BvuWneXBdvR/</a>Sharktooth - <a href="https://www.instagram.com/p/BvwQ0oBAW3-/" rel="nofollow" target="_blank">https://www.instagram.com/p/BvwQ0oBAW3-/</a>James: jerryyale84: Coffee Scoop <a href="https://www.instagram.com/p/Bvzuc4IAQWc/" rel="nofollow" target="_blank">https://www.instagram.com/p/Bvzuc4IAQWc/</a>Jake.sorensen.photography: Block Plane: <a href="https://www.instagram.com/p/BvuWneXBdvR/" rel="nofollow" target="_blank">https://www.instagram.com/p/BvuWneXBdvR/</a>Joke of the week63 Degrees North: ​JOKE: What's the difference between a good joke and a bad joke timing63 Degrees North: ​JOKE: I own the worlds worst thesaurus. Not only is it awful, it's awful.What’s new/what are we watching/reading?Will: Andy Rawls - <a href="https://www.youtube.com/watch?v=HThnKIC1oHw" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=HThnKIC1oHw</a>Natural Selection Studio - Podlets - <a href="https://www.instagram.com/p/BwFI5RhA-Na/" rel="nofollow" target="_blank">https://www.instagram.com/p/BwFI5RhA-Na/</a>James: 11foot8 bridge <a href="https://www.youtube.com/watch?v=TvxDhgDjVCA&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=13" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=TvxDhgDjVCA&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=13</a>Zack: Chef’s table on netflex.Favorite tool/product this week?Zack: Ball peen hammer I just forged.Will: ⅜” upcut spiral bit - <a href="https://amzn.to/2It2RzA" rel="nofollow" target="_blank">https://amzn.to/2It2RzA</a>James: Roubo Frame saw: <a href="https://www.youtube.com/watch?v=SC_hn3T9AqM" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=SC_hn3T9AqM</a>HostsJames Wright: Wood By Wright <a href="https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg</a>Zack Herberholz: ZH Fabrication <a href="https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w</a>William Walker: Wm. Walker Co. <a href="https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw</a> SHOW NOTESIntro and outro recorded and produced by Jason Wright <a href="http://withamic.com/" rel="nofollow" target="_blank">http://withamic.com/</a>

#121 Do you love it or do you Cactus!

Help us grow on Patreon https://www.patreon.com/CreatorsCollectiveHuge thank you to All of our Patrons! Especially Darren Mattes, Caleb Harris of YouCanMakeThisToo and Judith Grass.New Patreons:You can listen to us on iTunes, Google Play, SoundCloud and many other placesYou can join us live Thursdays at 10 AM eastern on the Creators Collective Podcast https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBgWhat’s new/ what are we working on?Zack: Hammers, Spring make, Makers CenteralWill: media console, new table, plane set up videohttps://www.youtube.com/channel/UC0RV-K22jKleJsEj2h5cPowJames: Bob ross retake: https://www.youtube.com/watch?v=akr6RzodDtk&amp;t=44sBed: https://www.youtube.com/watch?v=Ue4NBL9Nmk0&amp;list=PLAbayqjimalGA2yhWx5WNzzZ7VIXJ5aMmNew Channel: Coming soon!Creators Photo ChallengeDue next time: Monocromatic:What’s new/what are we watching/reading?Will: Nada MuchoJames: Mike Boyd: Memorizing 100 Digits of Pi in 1 Day: https://www.youtube.com/watch?v=zwAVlOOlLKw&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=4Zack: Nada MuchoFavorite tool/product this week?Zack: Airgraver.com engraving tool.Will: Metal Rescue Rust Remover Bath - https://amzn.to/2OLlEHaJames: Transitional Plane: https://youtu.be/9amT0RKXjOYHostsJames Wright: Wood By Wright https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHgZack Herberholz: ZH Fabrication https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7wWilliam Walker: Wm. Walker Co. https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCwSHOW NOTESIntro and outro recorded and produced by Jason Wright http://withamic.com/

Help us grow on Patreon <a href="https://www.patreon.com/CreatorsCollective" rel="nofollow" target="_blank">https://www.patreon.com/CreatorsCollective</a>Huge thank you to All of our Patrons! Especially Darren Mattes, Caleb Harris of YouCanMakeThisToo and Judith Grass.New Patreons:You can listen to us on iTunes, Google Play, SoundCloud and many other placesYou can join us live Thursdays at 10 AM eastern on the Creators Collective Podcast <a href="https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBg" rel="nofollow" target="_blank">https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBg</a>What’s new/ what are we working on?Zack: Hammers, Spring make, Makers CenteralWill: media console, new table, plane set up video<a href="https://www.youtube.com/channel/UC0RV-K22jKleJsEj2h5cPow" rel="nofollow" target="_blank">https://www.youtube.com/channel/UC0RV-K22jKleJsEj2h5cPow</a>James: Bob ross retake: <a href="https://www.youtube.com/watch?v=akr6RzodDtk&amp;t=44s" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=akr6RzodDtk&amp;t=44s</a>Bed: <a href="https://www.youtube.com/watch?v=Ue4NBL9Nmk0&amp;list=PLAbayqjimalGA2yhWx5WNzzZ7VIXJ5aMm" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=Ue4NBL9Nmk0&amp;list=PLAbayqjimalGA2yhWx5WNzzZ7VIXJ5aMm</a>New Channel: Coming soon!Creators Photo ChallengeDue next time: Monocromatic:What’s new/what are we watching/reading?Will: Nada MuchoJames: Mike Boyd: Memorizing 100 Digits of Pi in 1 Day: <a href="https://www.youtube.com/watch?v=zwAVlOOlLKw&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=4" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=zwAVlOOlLKw&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=4</a>Zack: Nada MuchoFavorite tool/product this week?Zack: <a href="http://Airgraver.com" rel="nofollow" target="_blank">Airgraver.com</a> engraving tool.Will: Metal Rescue Rust Remover Bath - <a href="https://amzn.to/2OLlEHa" rel="nofollow" target="_blank">https://amzn.to/2OLlEHa</a>James: Transitional Plane: <a href="https://youtu.be/9amT0RKXjOY" rel="nofollow" target="_blank">https://youtu.be/9amT0RKXjOY</a>HostsJames Wright: Wood By Wright <a href="https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg</a>Zack Herberholz: ZH Fabrication <a href="https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w</a>William Walker: Wm. Walker Co. <a href="https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw</a> SHOW NOTESIntro and outro recorded and produced by Jason Wright <a href="http://withamic.com/" rel="nofollow" target="_blank">http://withamic.com/</a>

#120 Feeding the trolls

In episode #119 there is no wrong way to eat a reese's, working on a chefs knife Xcarve build, Bed joinery, and a Baby RattleHelp us grow on Patreon https://www.patreon.com/CreatorsCollectiveHuge thank you to All of our Patrons! Especially Darren Mattes, Caleb Harris of YouCanMakeThisToo and Judith Grass.New Patreons:You can listen to us on iTunes, Google Play, SoundCloud and many other placesYou can join us live Thursdays at 10 AM eastern on the Creators Collective Podcast https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBgWhat’s new/ what are we working on?Zack: Forging another mess. 8” chef’s knifeWill: Slabs, Xcarve, Xcarve base, new bookmatch table, media console, baby, Need to make some videosJames: Bed: https://www.youtube.com/watch?v=Ue4NBL9Nmk0Flower Box: https://www.youtube.com/watch?v=7KcyB1ssK7oQ&amp;A: Yonatan24: explain more about longer hammer handlesCreators Photo ChallengeDue next time: MonochromeJoke of the week Why are people untrusting of escalators? They are often up to something.63 Degrees North: How does an Eskimo put his furniture projects together? Igloos it together.What’s new/what are we watching/reading?Will: Xcarve assembly instructionsJames: Wood and Shop. finish saving methouds: https://www.youtube.com/watch?v=2WWHpfE-w2E&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=26Zack: finally done with the anvil book.Favorite tool/product this week?Zack: Iso tunes: ZHFWill: Baby Rattle from Calvin - https://www.instagram.com/filamentco/James: OOMOO Mold Making rubber https://amzn.to/2FEWCW2HostsJames Wright: Wood By Wright https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHgZack Herberholz: ZH Fabrication https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7wWilliam Walker: Wm. Walker Co. https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCwSHOW NOTESIntro and outro recorded and produced by Jason Wright http://withamic.com/

In episode #119 there is no wrong way to eat a reese's, working on a chefs knife Xcarve build, Bed joinery, and a Baby RattleHelp us grow on Patreon <a href="https://www.patreon.com/CreatorsCollective" rel="nofollow" target="_blank">https://www.patreon.com/CreatorsCollective</a>Huge thank you to All of our Patrons! Especially Darren Mattes, Caleb Harris of YouCanMakeThisToo and Judith Grass.New Patreons:You can listen to us on iTunes, Google Play, SoundCloud and many other placesYou can join us live Thursdays at 10 AM eastern on the Creators Collective Podcast <a href="https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBg" rel="nofollow" target="_blank">https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBg</a>What’s new/ what are we working on?Zack: Forging another mess. 8” chef’s knifeWill: Slabs, Xcarve, Xcarve base, new bookmatch table, media console, baby, Need to make some videosJames: Bed: <a href="https://www.youtube.com/watch?v=Ue4NBL9Nmk0" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=Ue4NBL9Nmk0</a>Flower Box: <a href="https://www.youtube.com/watch?v=7KcyB1ssK7o" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=7KcyB1ssK7o</a>Q&amp;A: Yonatan24: explain more about longer hammer handlesCreators Photo ChallengeDue next time: MonochromeJoke of the week Why are people untrusting of escalators? They are often up to something.63 Degrees North: How does an Eskimo put his furniture projects together? Igloos it together.What’s new/what are we watching/reading?Will: Xcarve assembly instructionsJames: Wood and Shop. finish saving methouds: <a href="https://www.youtube.com/watch?v=2WWHpfE-w2E&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=26" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=2WWHpfE-w2E&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=26</a>Zack: finally done with the anvil book.Favorite tool/product this week?Zack: Iso tunes: ZHFWill: Baby Rattle from Calvin - <a href="https://www.instagram.com/filamentco/" rel="nofollow" target="_blank">https://www.instagram.com/filamentco/</a>James: OOMOO Mold Making rubber <a href="https://amzn.to/2FEWCW2" rel="nofollow" target="_blank">https://amzn.to/2FEWCW2</a>HostsJames Wright: Wood By Wright <a href="https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg</a>Zack Herberholz: ZH Fabrication <a href="https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w</a>William Walker: Wm. Walker Co. <a href="https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw</a> SHOW NOTESIntro and outro recorded and produced by Jason Wright <a href="http://withamic.com/" rel="nofollow" target="_blank">http://withamic.com/</a>

#119 My Hammer Is longer than yours

In episode #118 Will has a new baby and totaly lost internet connection.Help us grow on Patreon https://www.patreon.com/CreatorsCollectiveHuge thank you to All of our Patrons! Especially Darren Mattes, Caleb Harris of YouCanMakeThisToo and Judith Grass.You can listen to us on iTunes, Google Play, SoundCloud and many other placesYou can join us live Thursdays at 10 AM eastern on the Creators Collective Podcast https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBgWhat’s new/ what are we working on?Zack:Will: Callum, Media Console, Two-minute tool tips, J Katz-Moses ridiculousness, New bookmatched live-edge table, maybe some benches, Roubo?James: Rabbit planes: https://youtu.be/Rm_VuvUrRoQThe bed, epoxy trophy, Possibly a new channelQ&amp;A: Creators Photo ChallengeDue next time:Zack: tomy_hovington: https://www.instagram.com/p/ButxySvAhT7/Nerdron: Wood Curl: https://www.instagram.com/p/Buy5aZZgOvF/Will: McAllister Home - https://www.instagram.com/p/Bt1d_x3ARkj/Tomy Hovington - https://www.instagram.com/p/ButxySvAhT7/James: tomy_hovington: https://www.instagram.com/p/ButxySvAhT7/Mcallisterhom: https://www.instagram.com/p/Bt1d_x3ARkj/Joke of the weekWhat’s new/what are we watching/reading?Will: Nothing, I have a newbornJames: Anne of All Trades: Dovetailed Whiskey: Cabinethttps://www.youtube.com/watch?v=2-GHsMqO9Rk&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=6Zack:Favorite tool/product this week?Zack:Will: Woodriver No. 4 V3 - https://amzn.to/2JsYEOjJames: Osmo Pocket: https://amzn.to/2Jsx7MRHostsJames Wright: Wood By Wright https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHgZack Herberholz: ZH Fabrication https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7wWilliam Walker: Wm. Walker Co. https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCwSHOW NOTESIntro and outro recorded and produced by Jason Wright http://withamic.com/

In episode #118 Will has a new baby and totaly lost internet connection.Help us grow on Patreon <a href="https://www.patreon.com/CreatorsCollective" rel="nofollow" target="_blank">https://www.patreon.com/CreatorsCollective</a>Huge thank you to All of our Patrons! Especially Darren Mattes, Caleb Harris of YouCanMakeThisToo and Judith Grass.You can listen to us on iTunes, Google Play, SoundCloud and many other placesYou can join us live Thursdays at 10 AM eastern on the Creators Collective Podcast <a href="https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBg" rel="nofollow" target="_blank">https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBg</a>What’s new/ what are we working on?Zack:Will: Callum, Media Console, Two-minute tool tips, J Katz-Moses ridiculousness, New bookmatched live-edge table, maybe some benches, Roubo?James: Rabbit planes: <a href="https://youtu.be/Rm_VuvUrRoQ" rel="nofollow" target="_blank">https://youtu.be/Rm_VuvUrRoQ</a>The bed, epoxy trophy, Possibly a new channelQ&amp;A: Creators Photo ChallengeDue next time:Zack: tomy_hovington: <a href="https://www.instagram.com/p/ButxySvAhT7/" rel="nofollow" target="_blank">https://www.instagram.com/p/ButxySvAhT7/</a>Nerdron: Wood Curl: <a href="https://www.instagram.com/p/Buy5aZZgOvF/" rel="nofollow" target="_blank">https://www.instagram.com/p/Buy5aZZgOvF/</a>Will: McAllister Home - <a href="https://www.instagram.com/p/Bt1d_x3ARkj/" rel="nofollow" target="_blank">https://www.instagram.com/p/Bt1d_x3ARkj/</a>Tomy Hovington - <a href="https://www.instagram.com/p/ButxySvAhT7/" rel="nofollow" target="_blank">https://www.instagram.com/p/ButxySvAhT7/</a>James: tomy_hovington: <a href="https://www.instagram.com/p/ButxySvAhT7/" rel="nofollow" target="_blank">https://www.instagram.com/p/ButxySvAhT7/</a>Mcallisterhom: <a href="https://www.instagram.com/p/Bt1d_x3ARkj/" rel="nofollow" target="_blank">https://www.instagram.com/p/Bt1d_x3ARkj/</a> Joke of the week What’s new/what are we watching/reading?Will: Nothing, I have a newbornJames: <a href="https://www.youtube.com/channel/UCCkFJmUgzrZdkeHl_qPItsA" rel="nofollow" target="_blank">Anne of All Trades</a>: Dovetailed Whiskey: Cabinethttps://<a href="http://www.youtube.com/watch?v=2-GHsMqO9Rk&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=6" rel="nofollow" target="_blank">www.youtube.com/watch?v=2-GHsMqO9Rk&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=6</a>Zack:Favorite tool/product this week?Zack:Will: Woodriver No. 4 V3 - <a href="https://amzn.to/2JsYEOj" rel="nofollow" target="_blank">https://amzn.to/2JsYEOj</a>James: Osmo Pocket: <a href="https://amzn.to/2Jsx7MR" rel="nofollow" target="_blank">https://amzn.to/2Jsx7MR</a>HostsJames Wright: Wood By Wright <a href="https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg</a>Zack Herberholz: ZH Fabrication <a href="https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w</a>William Walker: Wm. Walker Co. <a href="https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw</a> SHOW NOTESIntro and outro recorded and produced by Jason Wright <a href="http://withamic.com/" rel="nofollow" target="_blank">http://withamic.com/</a>

#118 Wills crazy Internet connection

In episode #117 We talk about over sized tools With Paul Jackman, making Hanners and squishing things with Zach Herberholz and the stupidity of a spring pole lathe with James WrightHelp us grow on Patreon https://www.patreon.com/CreatorsCollectiveHuge thank you to All of our Patrons! Especially Darren Mattes, Caleb Harris of YouCanMakeThisToo and Judith Grass.New Patreons:You can listen to us on iTunes, Google Play, SoundCloud and many other placesYou can join us live Thursdays at 10 AM eastern on the Creators Collective Podcast https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBgWhat’s new/ what are we working on?Zack: HAmmersPaul: Big Screw driverJames: The bed!!! Spring Pole lathe, Scroll saw, What is a smoothing plane https://www.youtube.com/watch?v=LJ9-LGMO7OAQ&amp;A: Creators Photo ChallengeDue next time: Golden Ratio (look up the golden spiral or fibonacci spiral)Joke of the weekJim Dockrell: ​Wife texts husband on a cold winter morning "Windows frozen, won't open" Husband texts back "pour warm water over it and tap edges with hammer" 5 min later wife texts "Computer really messed up now"What’s new/what are we watching/reading?Paul: podcast: Todd Glass Show: https://starburns.audio/podcasts/the-todd-glass-show/James: Veritasium : Flexible Machines: https://www.youtube.com/watch?v=97t7Xj_iBv0&amp;index=4&amp;list=LLbMtJOly6TpO5MQQnNwkCHgZack: Podcasts. Crime town: https://www.crimetownshow.com/Favorite tool/product this week?Zack:Paul:James: Sharp FileHostsJames Wright: Wood By Wright https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHgZack Herberholz: ZH Fabrication https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7wWilliam Walker: Wm. Walker Co. https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCwPaul Jackman: Jackman Workshttps://www.youtube.com/channel/UCaI4Tib6te88f_P9r8w5TmwSHOW NOTESIntro and outro recorded and produced by Jason Wright http://withamic.com/

In episode #117 We talk about over sized tools With Paul Jackman, making Hanners and squishing things with Zach Herberholz and the stupidity of a spring pole lathe with James WrightHelp us grow on Patreon <a href="https://www.patreon.com/CreatorsCollective" rel="nofollow" target="_blank">https://www.patreon.com/CreatorsCollective</a>Huge thank you to All of our Patrons! Especially Darren Mattes, Caleb Harris of YouCanMakeThisToo and Judith Grass.New Patreons:You can listen to us on iTunes, Google Play, SoundCloud and many other placesYou can join us live Thursdays at 10 AM eastern on the Creators Collective Podcast <a href="https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBg" rel="nofollow" target="_blank">https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBg</a>What’s new/ what are we working on?Zack: HAmmersPaul: Big Screw driverJames: The bed!!! Spring Pole lathe, Scroll saw, What is a smoothing plane <a href="https://www.youtube.com/watch?v=LJ9-LGMO7OA" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=LJ9-LGMO7OA</a>Q&amp;A: Creators Photo ChallengeDue next time: Golden Ratio (look up the golden spiral or fibonacci spiral) Joke of the weekJim Dockrell: ​Wife texts husband on a cold winter morning "Windows frozen, won't open" Husband texts back "pour warm water over it and tap edges with hammer" 5 min later wife texts "Computer really messed up now"What’s new/what are we watching/reading?Paul: podcast: Todd Glass Show: <a href="https://starburns.audio/podcasts/the-todd-glass-show/" rel="nofollow" target="_blank">https://starburns.audio/podcasts/the-todd-glass-show/</a>James: Veritasium : Flexible Machines: <a href="https://www.youtube.com/watch?v=97t7Xj_iBv0&amp;index=4&amp;list=LLbMtJOly6TpO5MQQnNwkCHg" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=97t7Xj_iBv0&amp;index=4&amp;list=LLbMtJOly6TpO5MQQnNwkCHg</a>Zack: Podcasts. Crime town: <a href="https://www.crimetownshow.com/" rel="nofollow" target="_blank">https://www.crimetownshow.com/</a>Favorite tool/product this week?Zack:Paul:James: Sharp FileHostsJames Wright: Wood By Wright <a href="https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg</a>Zack Herberholz: ZH Fabrication <a href="https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w</a>William Walker: Wm. Walker Co. <a href="https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw</a>Paul Jackman: Jackman Works<a href="https://www.youtube.com/channel/UCaI4Tib6te88f_P9r8w5Tmw" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCaI4Tib6te88f_P9r8w5Tmw</a> SHOW NOTESIntro and outro recorded and produced by Jason Wright <a href="http://withamic.com/" rel="nofollow" target="_blank">http://withamic.com/</a>

#117 Will Is Having A Baby (Well His Wife is) 

A podcast about making stuff by hand. Woodworking, metalworking, leather, electronics, and more.

Do not cancel this podcast

Love the show but can Patreon funds go to getting will a new internet connection?

Love it

Creators Collective

We’re on Patreon!Patreon is a platform that allows you, the listener, to provide monthly support for the show in exchange for rewards! Our Patreon page has tons of support levels for $2 to $40, and our rewards include a weekly After Show, monthly hangouts, and more. Our top patron this week is Make Build Modify, and we'd like to welcome our new patrons: Matt Williams and Darren Mattes!What are we working on?Johnny: Published DIY floating shelves, working on collab with Seth’s Bike HacksJames: The bench. And a new wall in the shopEvan and Katelyn: walnut quick connects, refillable tea light candle holder, collab with Sean Hogan, Garage AC + 3d printed back draft prevention damperShow Topic: Special Guests Evan &amp; KatelynNelsoncrafttx: If you had to choose 1 YouTuber that you would say got you interested in creating videos, who would it be?bryceroebe: which tool or technique are you afraid to try, and why?prewittcustomcreations: what materials have you not worked with yet that you are wanting to?WillWorkForTools: do you have any best practices or advice to balancing a new startup YouTube channel while working full-time.The Cutting Bore: doing it part time for me has been a hell of a hustle outside of my full time job. How are you guys managing it day to day?WillWorkForTools: you seem somewhat unique in the YouTube maker space where you're making videos but also selling some of your projects. Would you mind discussing the strategyWhat’s new/what are we watching/reading?Johnny: Heath KnucklesJames: Vo2 Max Productions Ultra Running, WimbeltonEvan and Katelyn: Gravity Falls, Sean Hogan, Katie Ryan "I smell like beef"Favorite tool/product this week?Johnny: Sennheiser AVXJames: Narex 500 gram Brass Carving MalletEvan and Katelyn: Taz6 and Lulzbot mini 3D printer, Rode videomicro

<h3>We’re on Patreon!</h3>Patreon is a platform that allows you, the listener, to provide monthly support for the show in exchange for rewards! Our <a href="http://patreon.com/craftedpodcast" rel="nofollow" target="_blank">Patreon page</a> has tons of support levels for $2 to $40, and our rewards include a weekly After Show, monthly hangouts, and more. Our top patron this week is Make Build Modify, and we'd like to welcome our new patrons: Matt Williams and Darren Mattes!<h3>What are we working on?</h3>Johnny: Published DIY floating shelves, working on collab with Seth’s Bike HacksJames: The bench. And a new wall in the shopEvan and Katelyn: walnut quick connects, refillable tea light candle holder, collab with Sean Hogan, Garage AC + 3d printed back draft prevention damper<h3>Show Topic: Special Guests Evan &amp; Katelyn</h3>Nelsoncrafttx: If you had to choose 1 YouTuber that you would say got you interested in creating videos, who would it be?bryceroebe: which tool or technique are you afraid to try, and why?prewittcustomcreations: what materials have you not worked with yet that you are wanting to?WillWorkForTools: do you have any best practices or advice to balancing a new startup YouTube channel while working full-time.The Cutting Bore: doing it part time for me has been a hell of a hustle outside of my full time job. How are you guys managing it day to day?WillWorkForTools: you seem somewhat unique in the YouTube maker space where you're making videos but also selling some of your projects. Would you mind discussing the strategy<h3>What’s new/what are we watching/reading?</h3>Johnny: <a href="https://www.youtube.com/channel/UC7ymj9d5HO-sLh2AnyILAiQ" rel="nofollow" target="_blank">Heath Knuckles</a>James: <a href="https://www.youtube.com/user/Vo2maxProductions" rel="nofollow" target="_blank">Vo2 Max Productions Ultra Running</a>, <a href="https://www.youtube.com/watch?v=9kfY7qri5ys" rel="nofollow" target="_blank">Wimbelton</a>Evan and Katelyn: Gravity Falls, <a href="https://www.youtube.com/channel/UC1Fz5YWpwDUV66YLURRQp3w" rel="nofollow" target="_blank">Sean Hogan</a>, <a href="https://www.youtube.com/watch?v=5eZyspecXJE" rel="nofollow" target="_blank">Katie Ryan "I smell like beef"</a><h3>Favorite tool/product this week?</h3>Johnny: <a href="http://amzn.to/2upUyx1" rel="nofollow" target="_blank">Sennheiser AVX</a>James: <a href="http://amzn.to/2gWUr7h" rel="nofollow" target="_blank">Narex 500 gram Brass Carving Mallet</a>Evan and Katelyn: <a href="http://amzn.to/2oSI3EH" rel="nofollow" target="_blank">Taz6</a> and <a href="http://amzn.to/2tegjN2" rel="nofollow" target="_blank">Lulzbot mini</a> 3D printer, <a href="http://amzn.to/2uxYzAf" rel="nofollow" target="_blank">Rode videomicro</a>

#38: Special Guests Evan & Katelyn, The Couple That Makes Together!

What are we working on?Zack: Hanging out with Jimmy, Vlog, Industrial DeskJohnny: Published Scrap Wood Wall Art, working on chairs, Adirondack, tap handlesJames: Bench, Tool box with Melody, Shop Space, New Website   Show Topic: Answering More Listener Questions Robin Lewis : Hey guys! I'm busy building a new shop from the ground up and sound proofing is high on my agenda. Do you have any experience or advice on how to keep the noise inside the shop? I'm planning on doing a concrete block (bessa block) wall, and solid filling it with concrete. I've read that mass is key. Thoughts?Make Build Modify : I was wondering how much you guys have charged for some of the furniture you've built. I've made and sold a few pieces recently and my local economy is a little weak.  I need a ballpark estimate for marketing outside my local area.Boone Langston : I'm really terrible at keeping my space clean. The energy of creating often generates a product I'm really excited about and a mess I'm really... not excited about. I usually end up passing the burden onto my future self who ends up cleaning to make space for a new project. Of course, the easy answer is "just do it" so this is really more of a psychological question. Any tips or tricks to keep up with the clutter without it feeling like a huge chore before each new project? Question for Zack. Any suggestions on finishing in 90% or greater humidityAfter Show:Fred_mcintyre: Question for the show: After a table saw, what three large tools would each of you get next if you were setting up a new shop?What’s new/what are we watching/reading?Johnny: Third Coast CraftsmanJames: Andrew Milacci "Light box with family"Zack: Brett McafeeFavorite tool/product this week?Zack: Preppin’ WeaponJohnny: rOtring 500 0.5mm Mechanical PencilJames: SUIZAN Japanese Pull Saw Hand Saw 9-1/2 Ryoba

<h3>What are we working on?</h3>Zack: Hanging out with Jimmy, Vlog, Industrial DeskJohnny: Published Scrap Wood Wall Art, working on chairs, Adirondack, tap handlesJames: Bench, Tool box with Melody, Shop Space, New Website <h3>Show Topic: Answering More Listener Questions </h3>Robin Lewis : Hey guys! I'm busy building a new shop from the ground up and sound proofing is high on my agenda. Do you have any experience or advice on how to keep the noise inside the shop? I'm planning on doing a concrete block (bessa block) wall, and solid filling it with concrete. I've read that mass is key. Thoughts?Make Build Modify : I was wondering how much you guys have charged for some of the furniture you've built. I've made and sold a few pieces recently and my local economy is a little weak.  I need a ballpark estimate for marketing outside my local area.Boone Langston : I'm really terrible at keeping my space clean. The energy of creating often generates a product I'm really excited about and a mess I'm really... not excited about. I usually end up passing the burden onto my future self who ends up cleaning to make space for a new project. Of course, the easy answer is "just do it" so this is really more of a psychological question. Any tips or tricks to keep up with the clutter without it feeling like a huge chore before each new project? Question for Zack. Any suggestions on finishing in 90% or greater humidity<h3>After Show:</h3>Fred_mcintyre: Question for the show: After a table saw, what three large tools would each of you get next if you were setting up a new shop?<h3>What’s new/what are we watching/reading?</h3>Johnny: <a href="https://www.youtube.com/watch?v=SiLt05q09Qo" rel="nofollow" target="_blank">Third Coast Craftsman</a>James: <a href="https://www.youtube.com/watch?v=IWmn1MJ1DpY&amp;feature=em-uploademail" rel="nofollow" target="_blank">Andrew Milacci "Light box with family"</a>Zack: Brett McafeeFavorite tool/product this week?Zack: <a href="http://amzn.to/2tMccwb" rel="nofollow" target="_blank">Preppin’ Weapon</a>Johnny: <a href="http://amzn.to/2uBgkhd" rel="nofollow" target="_blank">rOtring 500 0.5mm Mechanical Pencil</a>James: <a href="http://amzn.to/2h5CX8V" rel="nofollow" target="_blank">SUIZAN Japanese Pull Saw Hand Saw 9-1/2 Ryoba</a>

#39: Pricing Your Work, Soundproofing Your Shop & Keeping It Clean

We’re on Patreon!Check out our Patreon page here, we have tons of support levels, a weekly After Show, monthly hangouts, and more! Our top patron this week is Make Build Modify, and we'd like to welcome our new patrons: Boone Langston and Nathan Serviss. Thanks for your support!What are we working on?Zack: Key Fobs, Chairs, T-shirts, Shoptruck.Johnny: Posting Roubo Part 1. Working on Oak dining chairs and bathroom vanitiesJames: A bench in the woods, and Hand carving a sign.  Show Topic: Identifying Wood Species, Which Welder To Start With &amp; YouTube For Business Lincoln Electric Power MIG 210MPHey Johnny, I recently picked up a pile of unwanted wood. Do y'all have a easy way to help identify the wood type. Thought this would be an interesting segment for the show. It's very heavy and doesn't have that oak smell when cutting. My first guess was some type of maple.On a scale of 1-10 (1 being new to the big box store and 10 being 50 years of mastery) how would you rank yourself?Matt AGood afternoon,I just read the step by step process for your reclaimed prison wood sliding doors. Absolutely fantastic, I love the reclaimed wood on a mideival frame, really want to do something like this myself. I have a fair background when it comes to wood working, but my experience with welding is slim to None! Do you have any recommendations with equipment or where I should start? I'd like to do my own frame and handle, not sure I could get away with my own nails though... so badass by the way.I intend to watch all of the videos you posted this evening when I have some free time, but if you have any advice for a novice of the extreme I'd greatly appreciate it!Thank you for your time and have an excellent evening.Andrew ShaferHey man --You and Johnny have sort of inspired/worn me down on the idea of building my own metal furniture components. Be it legs, or wholesale frames. I'm curious to get your input on buying a beginner priced machine (140a) vs. The Lincoln 210MP. I see a lot of benefit to going with the 210MP (particularly in the dummy proof set-up), but at double the premium, it's a hard pill to swallow if a 140amp machine will get me through most projects.I don't do this full-time, but my commisions are fairly steady. The most immediate example is I had some logs milled up this fall. I will likely end up making some simple slab style tables with them, so some square or trapezoidal legs are probably in order.I don't remember you talking about your machine on the podcast except saying that you bought it a year early because the 210MP came out the following year at near the same price point. If you've gone into more details and I've forgotten, I apologize. I know Johnny is firmly in the 210MP/buy once,cry once camp...I'm just curious to get your take on how much value the cpu set-up and higher amperage adds for light duty furniture fab.I've been researching over the past month and am sort of blown away by the constant backtracking on where a 140amp machine is limited. There's a lot of great welding tutorial info out there. And a lot of great info as it relates to things like pipe fitting and auto work. But far less info when it comes to furniture fabrication.Anyway, I appreciate all that you do/inspiration. I love your work and thoroughly enjoy the podcast!"I’ve always been around metal fabrication but never got into it myself. If I were to start welding what would you suggest wire feed or tig? Why?"@Evergladeswoodworks on Instagram"I'm kind of trying to build a portfolio to start a business when I'm done with my military service, and my question is:Has YouTube helped you in your business (of making and selling things) and would you encourage producing content for that reason?Thx, Love your work!"- Jed HuttAfter Show:"If you had to choose just one platform (besides YT) to focus on to support your YouTube channel, what would it be?"- Boone LangstonWhat’s new/what are we watching/reading?Johnny: Rogue Engineer on YouTubeJames: NO Bad Wood Fine woodworking Masters of the craft Zack: Kevin CaronFavorite tool/product this week?Zack: Dewalt Metal Chop SawJohnny: Whiteside Ultimate Router BitJames: A cheap set of chisels from Harbor FreightWant more episodes of the Crafted Podcast? Check out our Show Archives here.Crafted, Lincoln Electric, Welding, Woodworking, YouTube

<h3>We’re on Patreon!</h3>Check out our Patreon page <a href="http://patreon.com/craftedpodcast" rel="nofollow" target="_blank">here</a>, we have tons of support levels, a weekly After Show, monthly hangouts, and more! Our top patron this week is Make Build Modify, and we'd like to welcome our new patrons: Boone Langston and Nathan Serviss. Thanks for your support!<h3>What are we working on?</h3>Zack: Key Fobs, Chairs, T-shirts, Shoptruck.Johnny: Posting Roubo Part 1. Working on Oak dining chairs and bathroom vanitiesJames: A bench in the woods, and Hand carving a sign. <h3>Show Topic: Identifying Wood Species, Which Welder To Start With &amp; YouTube For Business</h3> Lincoln Electric Power MIG 210MP<blockquote>Hey Johnny, I recently picked up a pile of unwanted wood. Do y'all have a easy way to help identify the wood type. Thought this would be an interesting segment for the show. It's very heavy and doesn't have that oak smell when cutting. My first guess was some type of maple.</blockquote><blockquote>On a scale of 1-10 (1 being new to the big box store and 10 being 50 years of mastery) how would you rank yourself?</blockquote>Matt A<blockquote>Good afternoon,I just read the step by step process for your reclaimed prison wood sliding doors. Absolutely fantastic, I love the reclaimed wood on a mideival frame, really want to do something like this myself. I have a fair background when it comes to wood working, but my experience with welding is slim to None! Do you have any recommendations with equipment or where I should start? I'd like to do my own frame and handle, not sure I could get away with my own nails though... so badass by the way.I intend to watch all of the videos you posted this evening when I have some free time, but if you have any advice for a novice of the extreme I'd greatly appreciate it!Thank you for your time and have an excellent evening.</blockquote>Andrew Shafer<blockquote>Hey man --You and Johnny have sort of inspired/worn me down on the idea of building my own metal furniture components. Be it legs, or wholesale frames. I'm curious to get your input on buying a beginner priced machine (140a) vs. The Lincoln 210MP. I see a lot of benefit to going with the 210MP (particularly in the dummy proof set-up), but at double the premium, it's a hard pill to swallow if a 140amp machine will get me through most projects.I don't do this full-time, but my commisions are fairly steady. The most immediate example is I had some logs milled up this fall. I will likely end up making some simple slab style tables with them, so some square or trapezoidal legs are probably in order.I don't remember you talking about your machine on the podcast except saying that you bought it a year early because the 210MP came out the following year at near the same price point. If you've gone into more details and I've forgotten, I apologize. I know Johnny is firmly in the 210MP/buy once,cry once camp...I'm just curious to get your take on how much value the cpu set-up and higher amperage adds for light duty furniture fab.I've been researching over the past month and am sort of blown away by the constant backtracking on where a 140amp machine is limited. There's a lot of great welding tutorial info out there. And a lot of great info as it relates to things like pipe fitting and auto work. But far less info when it comes to furniture fabrication.Anyway, I appreciate all that you do/inspiration. I love your work and thoroughly enjoy the podcast!</blockquote><blockquote>"I’ve always been around metal fabrication but never got into it myself. If I were to start welding what would you suggest wire feed or tig? Why?"</blockquote>@Evergladeswoodworks on Instagram<blockquote>"I'm kind of trying to build a portfolio to start a business when I'm done with my military service, and my question is:Has YouTube helped you in your business (of making and selling things) and would you encourage producing content for that reason?Thx, Love your work!"</blockquote>- Jed Hutt<h3>After Show:</h3><blockquote>"If you had to choose just one platform (besides YT) to focus on to support your YouTube channel, what would it be?"</blockquote>- Boone Langston<h3>What’s new/what are we watching/reading?</h3>Johnny: <a href="https://www.youtube.com/watch?v=g3-iPZGl11Q" rel="nofollow" target="_blank">Rogue Engineer on YouTube</a>James: <a href="https://www.youtube.com/watch?v=TTwwavQGHZc&amp;feature=em-uploademail" rel="nofollow" target="_blank">NO Bad Wood Fine woodworking Masters of the craft </a>Zack: <a href="https://www.youtube.com/user/kevincaron" rel="nofollow" target="_blank">Kevin Caron</a><h3>Favorite tool/product this week?</h3>Zack: <a href="http://amzn.to/2qrqxeq" rel="nofollow" target="_blank">Dewalt Metal Chop Saw</a>Johnny: <a href="http://amzn.to/2pTxDoQ" rel="nofollow" target="_blank">Whiteside Ultimate Router Bit</a>James: <a href="http://amzn.to/2pEc0sR" rel="nofollow" target="_blank">A cheap set of chisels from Harbor Freight</a>Want more episodes of the Crafted Podcast? Check out our Show Archives <a href="http://static1.squarespace.com/static/5915dea1a5790a876017ecdc/596e1660176dc407af53a402/596e1685176dc407af53ab02/1500386949468/?format=original" rel="nofollow" target="_blank">here</a>.<a href="https://craftedworkshop.com/crafted-podcast/?tag=Crafted" rel="nofollow" target="_blank">Crafted</a>, <a href="https://craftedworkshop.com/crafted-podcast/?tag=Lincoln+Electric" rel="nofollow" target="_blank">Lincoln Electric</a>, <a href="https://craftedworkshop.com/crafted-podcast/?tag=Welding" rel="nofollow" target="_blank">Welding</a>, <a href="https://craftedworkshop.com/crafted-podcast/?tag=Woodworking" rel="nofollow" target="_blank">Woodworking</a>, <a href="https://craftedworkshop.com/crafted-podcast/?tag=YouTube" rel="nofollow" target="_blank">YouTube</a>

#29: Identifying Wood Species, Which Welder To Start With & YouTube For Business

We’re on Patreon!Check out our Patreon page here, we have tons of support levels, a weekly After Show, monthly hangouts, and more! Our top patron this week is Make Build Modify, and we'd like to welcome our new patrons: Andrew Hunt, Stian Johannessen, Logan Merkey, Robin Lewis, Chris Mayer, Keith Johnson, and Eric Sipe. Thanks for your support!What are we working on?Zack: Chairs, Plasma table, forged key fob,Johnny: Kerfing End TablesJames: Not the dresser! LED Lighting for the new shop space. 8 benches. Wals devoted to Carving, planes and saws. Finishing room.   Show Topic: Imagining Our Dream Shops dream woodworking shopJohnny: Space for each medium set up and ready to go. Teaching. An editor. One of everything Veritas and Lie Nielsen.Zack: Multiple lights, multiple cameras, sharpies &amp; tape measures everywhere, spacious, metal side, wood side, storage, paint booth,James: Focused lighting, 6 benches and a tool wall for each type.Q &amp; A:Jon Harmon: "what was your best and worst moment in the shop."Logan Merkey: "James, Favorite wood to carve?"After Show:Peter Warrender: "What tool do you guys have that you don’t need... but really like?"Jacob Hladik: "I'm thinking about adding a router insert to my table saw to save space. Would you guys put it on the left or right side of the blade? I see advantages to both."What’s new/what are we watching/reading?Johnny: Pinegrove on AudiotreeJames: Adjustable ChandelierZack: Design: The Definitive Visual History. Music - The Bones of J.R. JonesFavorite tool/product this week?Zack: Tomahawk 375 Plasma cutterJohnny: Bessey EKT55 One-Handed Edge ClampJames: American Green Lights LEDRandom Notes:Scroll Saw Scribbler (see his incredible work below) Want more episodes of the Crafted Podcast? Check out our Show Archives here.Crafted Podcast, Metalworking, Welding, Woodworking

<h3>We’re on Patreon!</h3>Check out our Patreon page <a href="http://patreon.com/craftedpodcast" rel="nofollow" target="_blank">here</a>, we have tons of support levels, a weekly After Show, monthly hangouts, and more! Our top patron this week is Make Build Modify, and we'd like to welcome our new patrons: Andrew Hunt, Stian Johannessen, Logan Merkey, Robin Lewis, Chris Mayer, Keith Johnson, and Eric Sipe. Thanks for your support!<h3>What are we working on?</h3>Zack: Chairs, Plasma table, forged key fob,Johnny: Kerfing End TablesJames: Not the dresser! LED Lighting for the new shop space. 8 benches. Wals devoted to Carving, planes and saws. Finishing room. <h3>Show Topic: Imagining Our Dream Shops</h3> dream woodworking shopJohnny: Space for each medium set up and ready to go. Teaching. An editor. One of everything Veritas and Lie Nielsen.Zack: Multiple lights, multiple cameras, sharpies &amp; tape measures everywhere, spacious, metal side, wood side, storage, paint booth,James: Focused lighting, 6 benches and a tool wall for each type.<h3>Q &amp; A:</h3>Jon Harmon: "what was your best and worst moment in the shop."Logan Merkey: "James, Favorite wood to carve?"<h3>After Show:</h3>Peter Warrender: "What tool do you guys have that you don’t need... but really like?"Jacob Hladik: "I'm thinking about adding a router insert to my table saw to save space. Would you guys put it on the left or right side of the blade? I see advantages to both."<h3>What’s new/what are we watching/reading?</h3>Johnny: <a href="https://www.youtube.com/watch?v=0JvG551iDTE" rel="nofollow" target="_blank">Pinegrove on Audiotree</a>James: <a href="https://www.youtube.com/watch?v=J0q-U2sRztA" rel="nofollow" target="_blank">Adjustable Chandelier</a>Zack: <a href="http://amzn.to/2q2zjiG" rel="nofollow" target="_blank">Design: The Definitive Visual History</a>. Music - The Bones of J.R. Jones<h3>Favorite tool/product this week?</h3>Zack: <a href="http://amzn.to/2qYH6LG" rel="nofollow" target="_blank">Tomahawk 375 Plasma cutter</a>Johnny: <a href="http://amzn.to/2q59teO" rel="nofollow" target="_blank">Bessey EKT55 One-Handed Edge Clamp</a>James: American Green Lights LED<h3>Random Notes:</h3><a href="https://www.instagram.com/scrollsawscribbler/?hl=en" rel="nofollow" target="_blank">Scroll Saw Scribbler</a> (see his incredible work below) Want more episodes of the Crafted Podcast? Check out our Show Archives <a href="http://static1.squarespace.com/static/5915dea1a5790a876017ecdc/596e1660176dc407af53a402/596e1685176dc407af53ab02/1500386949468/?format=original" rel="nofollow" target="_blank">here</a>.<a href="https://craftedworkshop.com/crafted-podcast/?tag=Crafted+Podcast" rel="nofollow" target="_blank">Crafted Podcast</a>, <a href="https://craftedworkshop.com/crafted-podcast/?tag=Metalworking" rel="nofollow" target="_blank">Metalworking</a>, <a href="https://craftedworkshop.com/crafted-podcast/?tag=Welding" rel="nofollow" target="_blank">Welding</a>, <a href="https://craftedworkshop.com/crafted-podcast/?tag=Woodworking" rel="nofollow" target="_blank">Woodworking</a>

#28: Imagining Our Dream Shops

In episode #75 We talk about Matt's love of crotch and his plans for the band saw, we also ask several questions about family/woodworking time management and different methods of sawing a board!Help us grow on Patreon https://www.patreon.com/craftedpodcastTop Patreons of the week Make Build Modify, Master of None, and Deby Brooke!!What’s new/ what are we working on?Zack:Belt Grinder… Knife, hammer...TruckWill: Teaching how to turn, table build,reorganizing shop,finishing basement, Joshua Farnsworth of Wood and Shop, FAWG James: GLUE TEST!!!! MWTCAMMatt: Finishing up the waterfall table Guild ProjectQ&amp;A:Ryan Collier: Since you and Matt both have kids, how do you manage the competing priorities of woodworking (shop time) and family time (house time)? ake Brooklyn: Question for Matt? 1. Coolest thing you've sliced up on that﻿ giant bandsaw? 2. Scariest moment while using or building the aforementioned giant bandsaw? Jim Dockrell: When milling, does he make the﻿ pith on the same plane as the blade travel? Theduck: ??? What would you say is the easiest/safest way to make a small﻿ bandsaw mill ¿¿¿What’s new/what are we watching/reading?Will: 368 - Casey Neistat it’s different.James: Carl Jacobson: https://www.youtube.com/watch?v=SP4sQj6l24c&amp;index=7&amp;list=LLbMtJOly6TpO5MQQnNwkCHgZack: The story of art - https://amzn.to/2qx4CRJMatt:  the Slow mo guys. https://www.youtube.com/user/theslowmoguysFavorite tool/product this week?Zack: Will: dividersJames: Miter shear http://www.leevalley.com/us/wood/page.aspx?p=32922&amp;cat=1,42884Matt: horizontal Band saw HostsJames Wright: Wood By Wright https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHgZack Herberholz: ZH Fabrication https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7wWilliam Walker: Wm. Walker Co. https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCwMatt Cremona: Matt Cremonahttps://www.youtube.com/user/mcremona SHOW NOTES Intro and outro recorded and produced by Jason Wright http://jason.theyouthman.com/

In episode #75 We talk about Matt's love of crotch and his plans for the band saw, we also ask several questions about family/woodworking time management and different methods of sawing a board!Help us grow on Patreon <a href="https://www.patreon.com/craftedpodcast" rel="nofollow" target="_blank">https://www.patreon.com/craftedpodcast</a>Top Patreons of the week Make Build Modify, Master of None, and Deby Brooke!!<h3>What’s new/ what are we working on?</h3>Zack:Belt Grinder… Knife, hammer...TruckWill: Teaching how to turn, table build,reorganizing shop,finishing basement, Joshua Farnsworth of Wood and Shop, FAWG James: GLUE TEST!!!! MWTCAMMatt: Finishing up the waterfall table Guild Project<h3>Q&amp;A:</h3>Ryan Collier: Since you and Matt both have kids, how do you manage the competing priorities of woodworking (shop time) and family time (house time)? ake Brooklyn: Question for Matt? 1. Coolest thing you've sliced up on that﻿ giant bandsaw? 2. Scariest moment while using or building the aforementioned giant bandsaw? Jim Dockrell: When milling, does he make the﻿ pith on the same plane as the blade travel? Theduck: ??? What would you say is the easiest/safest way to make a small﻿ bandsaw mill ¿¿¿<h3>What’s new/what are we watching/reading?</h3>Will: 368 - Casey Neistat it’s different.James: Carl Jacobson: <a href="https://www.youtube.com/watch?v=SP4sQj6l24c&amp;index=7&amp;list=LLbMtJOly6TpO5MQQnNwkCHg" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=SP4sQj6l24c&amp;index=7&amp;list=LLbMtJOly6TpO5MQQnNwkCHg</a>Zack: The story of art - <a href="https://amzn.to/2qx4CRJ" rel="nofollow" target="_blank">https://amzn.to/2qx4CRJ</a>Matt:  the Slow mo guys. <a href="https://www.youtube.com/user/theslowmoguys" rel="nofollow" target="_blank">https://www.youtube.com/user/theslowmoguys</a><h1>Favorite tool/product this week?</h1>Zack: Will: dividersJames: Miter shear <a href="http://www.leevalley.com/us/wood/page.aspx?p=32922&amp;cat=1,42884" rel="nofollow" target="_blank">http://www.leevalley.com/us/wood/page.aspx?p=32922&amp;cat=1,42884</a>Matt: horizontal Band saw <h1>Hosts</h1>James Wright: Wood By Wright <a href="https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg</a>Zack Herberholz: ZH Fabrication <a href="https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w</a>William Walker: Wm. Walker Co. <a href="https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw</a>Matt Cremona: Matt Cremona<a href="https://www.youtube.com/user/mcremona" rel="nofollow" target="_blank">https://www.youtube.com/user/mcremona</a> <h3>SHOW NOTES</h3> Intro and outro recorded and produced by Jason Wright <a href="http://jason.theyouthman.com/" rel="nofollow" target="_blank">http://jason.theyouthman.com/</a>

#75 Special Guest Matt Cremona

We’re on Patreon!Check out our Patreon page here, we have tons of support levels, a weekly After Show, monthly hangouts, and more! Our top patron this week is Make Build Modify, and we'd like to welcome our new patrons: there are none this week! Thanks for your support!What are we working on?Zack: ...chairs...Johnny: Farmhouse dining table and benches, Make Magazine videoJames: Making lumber with my bear hands. And the new Work bench.  Show Topic: Planning Your Woodworking Projects vs. Winging ItZack: Plan/sketchup all of the concrete informationJohnny: Plan everything ahead of time in SketchUp, going into the shop with cutlist in hand.James: Start with the one piece everything is built off of and go from there.What’s new/what are we watching/reading?Johnny: Evan and KatelynJames: Ishitani Furniture chairsZack: Puddles Pity PartyFavorite tool/product this week?Zack: Wiss W10T ShearsJohnny: Date stampJames: Splitting wedgeSHOW NOTES“What Type of Maker Are You?” by Peter Brown

<h3>We’re on Patreon!</h3>Check out our Patreon page <a href="http://patreon.com/craftedpodcast" rel="nofollow" target="_blank">here</a>, we have tons of support levels, a weekly After Show, monthly hangouts, and more! Our top patron this week is Make Build Modify, and we'd like to welcome our new patrons: there are none this week! Thanks for your support!<h3>What are we working on?</h3>Zack: ...chairs...Johnny: Farmhouse dining table and benches, Make Magazine videoJames: Making lumber with my bear hands. And the new Work bench. <h3>Show Topic: Planning Your Woodworking Projects vs. Winging It</h3>Zack: Plan/sketchup all of the concrete informationJohnny: Plan everything ahead of time in SketchUp, going into the shop with cutlist in hand.James: Start with the one piece everything is built off of and go from there.<h3>What’s new/what are we watching/reading?</h3>Johnny: <a href="https://www.youtube.com/user/EvanAndKatelyn" rel="nofollow" target="_blank">Evan and Katelyn</a>James: <a href="https://www.youtube.com/watch?v=iRkQljHNl1Q&amp;feature=em-uploademail" rel="nofollow" target="_blank">Ishitani Furniture chairs</a>Zack: <a href="https://www.youtube.com/user/PuddlesPityParty" rel="nofollow" target="_blank">Puddles Pity Party</a><h3>Favorite tool/product this week?</h3>Zack: <a href="http://amzn.to/2sYkbFr" rel="nofollow" target="_blank">Wiss W10T Shears</a>Johnny: <a href="http://amzn.to/2tRSYR5" rel="nofollow" target="_blank">Date stamp</a>James: Splitting wedge<h3>SHOW NOTES</h3><a href="https://www.youtube.com/watch?v=9oXUTEGbuJU" rel="nofollow" target="_blank">“What Type of Maker Are You?” by Peter Brown</a>

#33: Planning Your Woodworking Projects vs. Winging It

Kevin Caron

We’re on Patreon!Check out our Patreon page here, we have tons of support levels, a weekly After Show, monthly hangouts, and more! Our top patron this week is Make Build Modify, and we'd like to welcome our new patrons: Boone Langston and Nathan Serviss. Thanks for your support!What are we working on?Kevin: Plasma CNC!Zack: Brainstorming designs for a trestle table.. Getting ready to finally finish the chairs and start the industrial desk. truck.Johnny: Finishing Roubo bench, Powermatic pieces, dining chairsJames: A saw Bench. And going to Hand WorksShow Topic: Talking Metal Fabrication with Special Guest Kevin Caron What is your background, how did you get started in metalwork?What would you recommend people getting started welding start with?Kevin, looking at your website I see the Red Moon Slice end table. How big is your 3d printer to be able to print it.Brice McPherson - Kevin, i'd like to know your thought process on your site-specific sculptures. Do you go in with a plan or let the context speak to you? What initial steps do you take in your design process?Chris Gallegos - Hey guys! Question for Kevin-How often do "mistakes" or unintentional things become a part of the art sculptures or change the design? Or is it always to plan?Joke of the weekBob had a lot of work ahead of him so decided to hire a part time helper." Your first job will be to sweep up the sawdust." he said handing him a broom." Look I'm PRACTICALLY a university graduate," the young man protested." Oh, I understand..." Bob replied "Here, I'll show you how." xDWhat’s new/what are we watching/reading?Johnny: Heath Knuckles : https://www.youtube.com/watch?v=HGmgalpGi3w , Brian Oltrogge : https://www.youtube.com/watch?v=bGB3Gh6XXL0James: Matt Cremona https://www.youtube.com/user/mcremonaZack: Pontiak--new albumFavorite tool/product this week?Zack: Brent Bailey modified new style hammer &amp; H&amp;S Powershot 4550Johnny: Hollow Chisel MortiserJames: Broom burnisherWant more episodes of the Crafted Podcast? Check out our Show Archives here.Kevin Caron, Metalworking, Welding

<h3>We’re on Patreon!</h3>Check out our Patreon page <a href="http://patreon.com/craftedpodcast" rel="nofollow" target="_blank">here</a>, we have tons of support levels, a weekly After Show, monthly hangouts, and more! Our top patron this week is Make Build Modify, and we'd like to welcome our new patrons: Boone Langston and Nathan Serviss. Thanks for your support!<h3>What are we working on?</h3>Kevin: Plasma CNC!Zack: Brainstorming designs for a trestle table.. Getting ready to finally finish the chairs and start the industrial desk. truck.Johnny: Finishing Roubo bench, Powermatic pieces, dining chairsJames: A saw Bench. And going to Hand Works<h3>Show Topic: Talking Metal Fabrication with Special Guest Kevin Caron</h3> What is your background, how did you get started in metalwork?What would you recommend people getting started welding start with?Kevin, looking at your website I see the Red Moon Slice end table. How big is your 3d printer to be able to print it.Brice McPherson - Kevin, i'd like to know your thought process on your site-specific sculptures. Do you go in with a plan or let the context speak to you? What initial steps do you take in your design process?Chris Gallegos - Hey guys! Question for Kevin-How often do "mistakes" or unintentional things become a part of the art sculptures or change the design? Or is it always to plan?<h3>Joke of the week</h3>Bob had a lot of work ahead of him so decided to hire a part time helper." Your first job will be to sweep up the sawdust." he said handing him a broom." Look I'm PRACTICALLY a university graduate," the young man protested." Oh, I understand..." Bob replied "Here, I'll show you how." xD<h3>What’s new/what are we watching/reading?</h3>Johnny: Heath Knuckles : <a href="https://www.youtube.com/watch?v=HGmgalpGi3w" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=HGmgalpGi3w</a> , Brian Oltrogge : <a href="https://www.youtube.com/watch?v=bGB3Gh6XXL0" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=bGB3Gh6XXL0</a>James: Matt Cremona <a href="https://www.youtube.com/user/mcremona" rel="nofollow" target="_blank">https://www.youtube.com/user/mcremona</a>Zack: Pontiak--new album<h3>Favorite tool/product this week?</h3>Zack: Brent Bailey modified new style hammer &amp; <a href="http://amzn.to/2qFeiHE" rel="nofollow" target="_blank">H&amp;S Powershot 4550</a>Johnny: <a href="http://amzn.to/2qAlRAb" rel="nofollow" target="_blank">Hollow Chisel Mortiser</a>James: <a href="https://www.pinterest.com/pin/25051341654596624/" rel="nofollow" target="_blank">Broom burnisher</a>Want more episodes of the Crafted Podcast? Check out our Show Archives <a href="http://static1.squarespace.com/static/5915dea1a5790a876017ecdc/596e1660176dc407af53a402/596e1685176dc407af53ab02/1500386949468/?format=original" rel="nofollow" target="_blank">here</a>.<a href="https://craftedworkshop.com/crafted-podcast/?tag=Kevin+Caron" rel="nofollow" target="_blank">Kevin Caron</a>, <a href="https://craftedworkshop.com/crafted-podcast/?tag=Metalworking" rel="nofollow" target="_blank">Metalworking</a>, <a href="https://craftedworkshop.com/crafted-podcast/?tag=Welding" rel="nofollow" target="_blank">Welding</a>

#31: Talking Metal Fabrication with Special Guest Kevin Caron

We’re on Patreon!We've added a $250 goal to add a weekly weekend show. We've got tons of support levels, including a weekly After Show, monthly hangouts, and more. Our top patron this week is Make Build Modify!Support Us On PatreonWhat are we working on?Zack: Desk is out, Finished Design Book, Industrial Farmhouse table...CincinnatiJohnny: Finished the chairs! Plywood sofa next week.James: Running. Planing stops. Playing with BLO  Show Topic: Staying Organized &amp; Productive In Our WoodworkingMetal &amp; Grain: Besides posting on Tuesdays and podcast, what other items or set schedules do you follow?Metal &amp; Grain: Also, what is the preferred software for getting organized?Tom's Dreamshop Worx: do you track your shop hours for billing or time analysisFrank McCanow: how long do you keep the raw footage you shoot for a video?Johnny: Apple Notes, Dropbox, trying TrelloJames: Google KeepQ&amp;A:Dusty2theMax: Gents, Looking at buying 1 or 2 hand plans - which planes would you recommend? not so much brand but No. etc.After Party:Theduck: Is it to late to ask what cameras y'all started your YouTube videos with, and to what y'all use now?Joke of the weekFrom Richard Clarke:"I watched a documentary about how they fix steelwork together last night.It was riveting!"What’s new/what are we watching/reading?Johnny: Mogul PodcastJames: Minimalist Maker (video below)Zack: Furniture Society, Money pit, MFM Favorite tool/product this week?Zack: Dewalt Plate JoinerJohnny: Fuji Q3 HVLPJames: Ball jars

<h3>We’re on Patreon!</h3>We've added a $250 goal to add a weekly weekend show. We've got tons of support levels, including a weekly After Show, monthly hangouts, and more. Our top patron this week is Make Build Modify!<a href="http://patreon.com/craftedpodcast" rel="nofollow" target="_blank">Support Us On Patreon</a><h3>What are we working on?</h3>Zack: Desk is out, Finished Design Book, Industrial Farmhouse table...CincinnatiJohnny: Finished the chairs! Plywood sofa next week.James: Running. Planing stops. Playing with BLO <h3>Show Topic: Staying Organized &amp; Productive In Our Woodworking</h3>Metal &amp; Grain: Besides posting on Tuesdays and podcast, what other items or set schedules do you follow?Metal &amp; Grain: Also, what is the preferred software for getting organized?Tom's Dreamshop Worx: do you track your shop hours for billing or time analysisFrank McCanow: how long do you keep the raw footage you shoot for a video?Johnny: Apple Notes, Dropbox, trying TrelloJames: Google Keep<h3>Q&amp;A:</h3>Dusty2theMax: Gents, Looking at buying 1 or 2 hand plans - which planes would you recommend? not so much brand but No. etc.<h3>After Party:</h3>Theduck: Is it to late to ask what cameras y'all started your YouTube videos with, and to what y'all use now?<h3>Joke of the week</h3>From Richard Clarke:"I watched a documentary about how they fix steelwork together last night.It was riveting!"<h3>What’s new/what are we watching/reading?</h3>Johnny: <a href="https://gimletmedia.com/mogul/" rel="nofollow" target="_blank">Mogul Podcast</a>James: Minimalist Maker (video below)Zack: Furniture Society, Money pit, MFM <h3>Favorite tool/product this week?</h3>Zack: <a href="http://amzn.to/2uHKrjL" rel="nofollow" target="_blank">Dewalt Plate Joiner</a>Johnny: <a href="http://amzn.to/2wvh3PT" rel="nofollow" target="_blank">Fuji Q3 HVLP</a>James: <a href="http://amzn.to/2vQHGBI" rel="nofollow" target="_blank">Ball jars</a>

#41: Staying Organized & Productive In Our Woodworking

In episode #96 We discus Epoxy in Woodworking, reversing glue in projects, scariest moments in the shop, Where to find Inspiration, and what mediums do we to learn or work in.Help us grow on Patreon https://www.patreon.com/CreatorsCollectiveHuge thank you to All of our Patreons! Especially Darren Mattes, Caleb Harris of YouCanMakeThisToo and John from John Made ItYou can listen to us on iTunes, Google Play, SoundCloud and many other placesYou can join us live Thursdays at 10 AM eastern on the Creators Collective Podcast https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBgWhat’s new/ what are we working on?Zack: New video,engraving/chasingJames: Finished the turning saw: https://www.youtube.com/watch?v=xhpsCpsOQeMCompared freehand to guide cut dovetails: https://www.youtube.com/watch?v=RfE6O16OXzM&amp;t=1sQ&amp;A:Gizanked: ​so I'm trying to remove drawer bottoms on an old drawer. I'm assuming this is hide glue based on the crackled pattern. can I break this glue joint with just a heat gun or should I wet it too?Sean Sturgis: Scariest shop moment?Theduck: Where do you find inspiration now, after everything you have already doneJW Craftsman: What’s a medium or combination of mediums that you would like to work with that you haven’t yet because of lack of tools, accessibility etc.Creators Photo ChallengeDue next time: Free Style (best Photo you can make)Joke of the weekCarbonite Gamorrean: ​What do you call a sleeping bulldog ¿¿¿ BulldozerWhat’s new/what are we watching/reading?James: R. Humphrey: Celtic bowl. https://www.youtube.com/watch?v=Omd0N4krVh4&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=3Zack: Jeff MutzFavorite tool/product this week?Zack: Best Value Vacs - https://www.bestvaluevacs.com/best-value-vacs-2-gallon-aluminum-vacuum-chamber-and-ve225-4cfm-2-stage-vacuum-pump-kit.htmlJames: Oil Can: https://amzn.to/2MTXt7aHostsJames Wright: Wood By Wright https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHgZack Herberholz: ZH Fabrication https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7wWilliam Walker: Wm. Walker Co. https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCwSHOW NOTESIntro and outro recorded and produced by Jason Wright http://withamic.com/

In episode #96 We discus Epoxy in Woodworking, reversing glue in projects, scariest moments in the shop, Where to find Inspiration, and what mediums do we to learn or work in.Help us grow on Patreon <a href="https://www.patreon.com/CreatorsCollective" rel="nofollow" target="_blank">https://www.patreon.com/CreatorsCollective</a>Huge thank you to All of our Patreons! Especially Darren Mattes, Caleb Harris of YouCanMakeThisToo and John from John Made ItYou can listen to us on iTunes, Google Play, SoundCloud and many other placesYou can join us live Thursdays at 10 AM eastern on the Creators Collective Podcast <a href="https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBg" rel="nofollow" target="_blank">https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBg</a>What’s new/ what are we working on?Zack: New video,engraving/chasingJames: Finished the turning saw: <a href="https://www.youtube.com/watch?v=xhpsCpsOQeM" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=xhpsCpsOQeM</a>Compared freehand to guide cut dovetails: <a href="https://www.youtube.com/watch?v=RfE6O16OXzM&amp;t=1s" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=RfE6O16OXzM&amp;t=1s</a>Q&amp;A:Gizanked: ​so I'm trying to remove drawer bottoms on an old drawer. I'm assuming this is hide glue based on the crackled pattern. can I break this glue joint with just a heat gun or should I wet it too?Sean Sturgis: Scariest shop moment?Theduck: Where do you find inspiration now, after everything you have already doneJW Craftsman: What’s a medium or combination of mediums that you would like to work with that you haven’t yet because of lack of tools, accessibility etc.Creators Photo ChallengeDue next time: Free Style (best Photo you can make)Joke of the weekCarbonite Gamorrean: ​What do you call a sleeping bulldog ¿¿¿ BulldozerWhat’s new/what are we watching/reading?James: R. Humphrey: Celtic bowl. <a href="https://www.youtube.com/watch?v=Omd0N4krVh4&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=3" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=Omd0N4krVh4&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=3</a>Zack: Jeff MutzFavorite tool/product this week?Zack: Best Value Vacs - <a href="https://www.bestvaluevacs.com/best-value-vacs-2-gallon-aluminum-vacuum-chamber-and-ve225-4cfm-2-stage-vacuum-pump-kit.html" rel="nofollow" target="_blank">https://www.bestvaluevacs.com/best-value-vacs-2-gallon-aluminum-vacuum-chamber-and-ve225-4cfm-2-stage-vacuum-pump-kit.html</a>James: Oil Can: <a href="https://amzn.to/2MTXt7a" rel="nofollow" target="_blank">https://amzn.to/2MTXt7a</a>HostsJames Wright: Wood By Wright <a href="https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg</a>Zack Herberholz: ZH Fabrication <a href="https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w</a>William Walker: Wm. Walker Co. <a href="https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw</a> SHOW NOTESIntro and outro recorded and produced by Jason Wright <a href="http://withamic.com/" rel="nofollow" target="_blank">http://withamic.com/</a>

#96 Epoxy River Handles

We’re on Patreon!We've added a $250 goal for weekend show. There are tons of support levels, a weekly After Show, monthly hangouts, and more. Top patrons this week are Make Build Modify, Master of None, and Deby Brooke!Support The Show!What’s new/ what are we working on?Zack: Shelf, Leatherworking, Bushmills, FabtechJohnny: Modern Dining Table, Assembly Table DesignJames: KITCHEN!!!!  Show Topic: Does Design, Content or Usability Come First?Metal &amp; Grain :Do you think about design, content or usability first?Make Brooklyn :How does being a content creator affect your timeline in completing projects? I know for me, filming makes it take easily three times longer than it otherwise would.Keith Johnson WW:When you guys put together a YouTube vid, do you record everything and then do a marathon editing session? Or do you work in chunks and edit as you finish each phase of the project?Yonatan2:What do you do when you find yourself awake at 5AM, unable to sleep, being blasted with tons of great project ideas? Only me?Hammer and Neil:If you could make any step of the process done in an instant what step would it be?Joke of the weekFrom Yonatan2 : What's a really cheap DIYing consumable you can buy on Amazon?Primer.What’s new/what are we watching/reading?Johnny: Jer’s Woodshop (video below)James: Mortise and TenonZack: Make Supply Favorite tool/product this week?Zack: Lanskey Sharpening systemJohnny: Whiteside Chamfering BitJames: Dead on Annihilator Wrecking BarWoodworking

<h3>We’re on Patreon!</h3>We've added a $250 goal for weekend show. There are tons of support levels, a weekly After Show, monthly hangouts, and more. Top patrons this week are Make Build Modify, Master of None, and Deby Brooke!<a href="http://patreon.com/craftedpodcast" rel="nofollow" target="_blank">Support The Show!</a><h3>What’s new/ what are we working on?</h3>Zack: Shelf, Leatherworking, Bushmills, FabtechJohnny: Modern Dining Table, Assembly Table DesignJames: KITCHEN!!!!  <h3>Show Topic: Does Design, Content or Usability Come First?</h3>Metal &amp; Grain :<blockquote>Do you think about design, content or usability first?</blockquote>Make Brooklyn :<blockquote>How does being a content creator affect your timeline in completing projects? I know for me, filming makes it take easily three times longer than it otherwise would.</blockquote>Keith Johnson WW:<blockquote>When you guys put together a YouTube vid, do you record everything and then do a marathon editing session? Or do you work in chunks and edit as you finish each phase of the project?</blockquote>Yonatan2:<blockquote>What do you do when you find yourself awake at 5AM, unable to sleep, being blasted with tons of great project ideas? Only me?</blockquote>Hammer and Neil:<blockquote>If you could make any step of the process done in an instant what step would it be?</blockquote><h3>Joke of the week</h3>From Yonatan2 : <blockquote>What's a really cheap DIYing consumable you can buy on Amazon?</blockquote><blockquote>Primer.</blockquote><h3>What’s new/what are we watching/reading?</h3>Johnny: Jer’s Woodshop (video below)James: <a href="https://www.mortiseandtenonmag.com/" rel="nofollow" target="_blank">Mortise and Tenon</a>Zack: <a href="http://makesupply-leather.com/" rel="nofollow" target="_blank">Make Supply</a> <h3>Favorite tool/product this week?</h3>Zack: <a href="http://amzn.to/2gyY0Ot" rel="nofollow" target="_blank">Lanskey Sharpening system</a>Johnny: <a href="http://amzn.to/2z22OT3" rel="nofollow" target="_blank">Whiteside Chamfering Bit</a>James: <a href="http://amzn.to/2z2fR7" rel="nofollow" target="_blank">Dead on Annihilator Wrecking Bar</a><a href="https://craftedworkshop.com/crafted-podcast/?tag=Woodworking" rel="nofollow" target="_blank">Woodworking</a>

#50: Does Design, Content or Usability Come First?

We’re on Patreon!Added $250 goal for weekend show. Tons of support levels, weekly After Show, monthly hangouts. Make Build Modify and Deby Brooke!! Learn MoreWhat’s new/ what are we working on?Zack: Fabtech Build (GET FABTECH TICKETS HERE), Leatherwork.Johnny: New Kid! Last podcast.James: Counter top, tool rack, a video a weekShow Topic: Working with Butternut, Plane Tills, Mini Series, and MoreMark Maunula:I recently was able to get a couple hundred board feet of butternut. Looking at the tree identification, I see that it is a very soft wood. What type of projects would it be good for and what type of projects should I probably avoid? Thanks!Tracy Keaton:I have a 1780s Chinese Calligraphy Scholar Cabinet that truly is in great need of some type of hydration! I am so afraid to touch it because it is so very thin. Could someone recommend something?Evan Dunville :I'm going to build a plane till really soon, any suggestions on the angle to use?Metal &amp; Grain:Have you explored making mini series for your channels? if so, which ones?Joke of the weekFrom Jeff Gruff:What did the tree do when the bank closed? It started it's own branch.What’s new/what are we watching/reading?Johnny: Chris Harris On Cars (see below)James: Mortise and Tenon MagazineZack: How to Draw: drawing and sketching objects and environments from your imagination Favorite tool/product this week?Zack: Olfa 45mm Rotary CutterJohnny: Rockler Universal Drawer Slide JigJames: eggbeater drill.

<h3>We’re on Patreon!</h3>Added $250 goal for weekend show. Tons of support levels, weekly After Show, monthly hangouts. Make Build Modify and Deby Brooke!! <a href="http://patreon.com/craftedpodcast" rel="nofollow" target="_blank">Learn More</a><h3>What’s new/ what are we working on?</h3>Zack: Fabtech Build (<a href="https://l-v1.feathr.co/v1/fabtech-2017-lincoln-electric-co-e" rel="nofollow" target="_blank">GET FABTECH TICKETS HERE</a>), Leatherwork.Johnny: New Kid! Last podcast.James: Counter top, tool rack, a video a week<h3>Show Topic: Working with Butternut, Plane Tills, Mini Series, and More</h3>Mark Maunula:<blockquote>I recently was able to get a couple hundred board feet of butternut. Looking at the tree identification, I see that it is a very soft wood. What type of projects would it be good for and what type of projects should I probably avoid? Thanks!</blockquote>Tracy Keaton:<blockquote>I have a 1780s Chinese Calligraphy Scholar Cabinet that truly is in great need of some type of hydration! I am so afraid to touch it because it is so very thin. Could someone recommend something?</blockquote>Evan Dunville :<blockquote>I'm going to build a plane till really soon, any suggestions on the angle to use?</blockquote>Metal &amp; Grain:<blockquote>Have you explored making mini series for your channels? if so, which ones?</blockquote><h3>Joke of the week</h3>From Jeff Gruff:<blockquote>What did the tree do when the bank closed?</blockquote><blockquote> </blockquote><blockquote>It started it's own branch.</blockquote><h3>What’s new/what are we watching/reading?</h3>Johnny: Chris Harris On Cars (see below)James: Mortise and Tenon MagazineZack: <a href="http://amzn.to/2zpZAgp" rel="nofollow" target="_blank">How to Draw: drawing and sketching objects and environments from your imagination</a> <h3>Favorite tool/product this week?</h3>Zack: <a href="http://amzn.to/2hyLwXA" rel="nofollow" target="_blank">Olfa 45mm Rotary Cutter</a>Johnny: <a href="http://amzn.to/2z7i822" rel="nofollow" target="_blank">Rockler Universal Drawer Slide Jig</a>James: <a href="http://oldtoolheaven.com/hand_drills/drill.htm" rel="nofollow" target="_blank">eggbeater drill.</a>

#52: Johnny's Last Show!

We’re on Patreon!We've added a $250 goal that, if we hit, we'll add a weekend show! We've got tons of support levels, a weekly After Show, monthly hangouts, and more. Our top patron this week is Make Build Modify!! New Patrons this week include Steve House, Made by Laurent, Keith Decent, and the man, the legend, Marc Spagnuolo!Support Us On PatreonWhat are we working on?Zack: Birthday, Desk, Table--materials,Johnny: Working on chairs, finished tap handles, new carJames: shop space, Bench, Logo carvingShow Topic: Learning How To Screw Up &amp; Fix ItJohnny: Biggest screw ups. Almost cut table top on wrong side of track saw. Spray painted stripe on jack stand tables. Didn’t cut Domino mortises before gluing up organ cabinet. Wood filler is your friend. Always buy extra material. Cut Roubo stretcher too short.James: New bench top, Back dresser stretcherAfter Show:Ravenspat: question for everyone, I just got this really cool groove plane 😃 (thank you James and your great contest) and need a good beginning project to use it on, any suggestionsJoke of the weekSubmitted by Matt SolahQ: What did the 80 grit sandpaper say to the 400 grit? A: You're so fine :) What’s new/what are we watching/reading?Johnny: Wabi Sab-E, Bernie Solo (videos below)James: Black Bear Forge S hook blacksmithingZack: Civilization 6, Twin Peaks   Favorite tool/product this week?Zack: Brass threaded insertsJohnny: 3m WorkTunesJames: Bad Axe Hand saw !!!!!!!!!! http://www.badaxetoolworks.com/

<h3>We’re on <a href="http://patreon.com/craftedpodcast" rel="nofollow" target="_blank">Patreon</a>!</h3>We've added a $250 goal that, if we hit, we'll add a weekend show! We've got tons of support levels, a weekly After Show, monthly hangouts, and more. Our top patron this week is Make Build Modify!! New Patrons this week include Steve House, Made by Laurent, Keith Decent, and the man, the legend, Marc Spagnuolo!<a href="http://patreon.com/craftedpodcast" rel="nofollow" target="_blank">Support Us On Patreon</a><h3>What are we working on?</h3>Zack: Birthday, Desk, Table--materials,Johnny: Working on chairs, finished tap handles, new carJames: shop space, Bench, Logo carving<h3>Show Topic: Learning How To Screw Up &amp; Fix It</h3>Johnny: Biggest screw ups. Almost cut table top on wrong side of track saw. Spray painted stripe on jack stand tables. Didn’t cut Domino mortises before gluing up organ cabinet. Wood filler is your friend. Always buy extra material. Cut Roubo stretcher too short.James: New bench top, Back dresser stretcher<h3>After Show:</h3>Ravenspat: question for everyone, I just got this really cool groove plane 😃 (thank you James and your great contest) and need a good beginning project to use it on, any suggestions<h3>Joke of the week</h3>Submitted by Matt SolahQ: What did the 80 grit sandpaper say to the 400 grit?  A: You're so fine :) <h3>What’s new/what are we watching/reading?</h3>Johnny: Wabi Sab-E, Bernie Solo (videos below)James: Black Bear Forge S hook blacksmithingZack: <a href="http://amzn.to/2hqwiX3" rel="nofollow" target="_blank">Civilization 6</a>, Twin Peaks <h3>Favorite tool/product this week?</h3>Zack: <a href="http://amzn.to/2hqMIOW" rel="nofollow" target="_blank">Brass threaded inserts</a>Johnny: <a href="http://amzn.to/2v2bQ1S" rel="nofollow" target="_blank">3m WorkTunes</a>James: Bad Axe Hand saw !!!!!!!!!! <a href="http://www.badaxetoolworks.com/" rel="nofollow" target="_blank">http://www.badaxetoolworks.com/</a>

#40: Learning How To Screw Up & Fix It

We’re on Patreon!We've added a $250 goal for a weekend show! There are tons of support levels, with rewards including a weekly After Show, monthly hangouts, and more. Our top patrons this week are Make Build Modify, Master of None, and Deby Brooke! New Patrons: David Prevost.Support The ShowWhat’s new/ what are we working on?Zack: Industrial Shelf, Mini-cleaver with IDKJohnny: Modern Dining Table, Make or Break Podcast with Brandon CullumJames: Plane Till, Spring Pole lathe, Kitchen remodel.Q&amp;A:Keith Johnson Custom Woodworking :What's your approach for gluing up long miters? Similar to what you would have on a waterfall table.Theduck :I want to make a French cleat wall, only I need it to hang from the rafter in the basement (or what ever them long peace’s of wood are called)Sean Foushee :If you needed to glue up table tops but didn't have a domino, would you go with biscuits, dowels, or just use cauls? 5-6 table tops minimumDoc Darkness :If you could choose one material to work with, what would it be and why?TheFantasic MrFox :With Christmas coming up, what kind of gifts are you guys going to make?Patrick's WorkShop :Question for full time content creators how do you guys manage your time with building, editing, social media, and family and friendsAfter Show:Doc Darkness :What you guys think about using hot glue to hold a piece when gluing panels during assembly? Think I saw Jimmy DiResta doing it once and thought cool idea!Theduck :Other then being makers in the shop, what other thing do y’all like to do...like bake bread...cookies...take pictures to put in the frames y’all make???What’s new/what are we watching/reading?Johnny: Learn Quick w/ Mike Boyd James: Giaco Whatever Zack: Creativity inc, Zen aomm, Al Stohlman leatherworking stuffFavorite tool/product this week?Zack: Dewalt PortabandJohnny: Parallel Bar ClampsJames: Stanley 55SHOW NOTESFrom Matt Whitlow:Hey guys just want you to know that Alone in the Wilderness is available legally online at the internet archive.https://archive.org/details/AloneInTheWilderness

<h3>We’re on Patreon!</h3>We've added a $250 goal for a weekend show! There are tons of support levels, with rewards including a weekly After Show, monthly hangouts, and more. Our top patrons this week are Make Build Modify, Master of None, and Deby Brooke! New Patrons: David Prevost.<a href="http://patreon.com/craftedpodcast" rel="nofollow" target="_blank">Support The Show</a><h3>What’s new/ what are we working on?</h3>Zack: Industrial Shelf, Mini-cleaver with IDKJohnny: Modern Dining Table, <a href="https://rss.simplecast.com/podcasts/3529/rss" rel="nofollow" target="_blank">Make or Break Podcast with Brandon Cullum</a>James: Plane Till, Spring Pole lathe, Kitchen remodel.<h3>Q&amp;A:</h3>Keith Johnson Custom Woodworking :<blockquote>What's your approach for gluing up long miters? Similar to what you would have on a waterfall table.</blockquote>Theduck :<blockquote>I want to make a French cleat wall, only I need it to hang from the rafter in the basement (or what ever them long peace’s of wood are called)</blockquote>Sean Foushee :<blockquote>If you needed to glue up table tops but didn't have a domino, would you go with biscuits, dowels, or just use cauls? 5-6 table tops minimum</blockquote>Doc Darkness :<blockquote>If you could choose one material to work with, what would it be and why?</blockquote>TheFantasic MrFox :<blockquote>With Christmas coming up, what kind of gifts are you guys going to make?</blockquote>Patrick's WorkShop :<blockquote>Question for full time content creators how do you guys manage your time with building, editing, social media, and family and friends</blockquote><h3>After Show:</h3>Doc Darkness :<blockquote>What you guys think about using hot glue to hold a piece when gluing panels during assembly? Think I saw Jimmy DiResta doing it once and thought cool idea!</blockquote>Theduck :<blockquote>Other then being makers in the shop, what other thing do y’all like to do...like bake bread...cookies...take pictures to put in the frames y’all make???</blockquote><h3>What’s new/what are we watching/reading?</h3>Johnny: Learn Quick w/ Mike Boyd James: Giaco Whatever Zack: Creativity inc, Zen aomm, Al Stohlman leatherworking stuff<h3>Favorite tool/product this week?</h3>Zack: <a href="http://amzn.to/2z0TQGE" rel="nofollow" target="_blank">Dewalt Portaband</a>Johnny: <a href="http://amzn.to/2fX3Po7" rel="nofollow" target="_blank">Parallel Bar Clamps</a>James: Stanley 55<h3>SHOW NOTES</h3>From Matt Whitlow:<blockquote>Hey guys just want you to know that Alone in the Wilderness is available legally online at the internet archive.</blockquote><a href="https://archive.org/details/AloneInTheWilderness" rel="nofollow" target="_blank">https://archive.org/details/AloneInTheWilderness</a>

#49: Answering More Listener Questions

In episode #76 We talk about Getting shirts, The early results from the glue Test, Shop questions, and pick this weeks winner of the #CreatorsPhotoChallengeHelp us grow on Patreon https://www.patreon.com/craftedpodcastTop Patreons of the week Make Build Modify, Master of None, and Deby Brooke!!What’s new/ what are we working on?Zack:Truck, Shirts, The truck into paintWill: Jointer Video, Basement, Walnut Dining Table,Vacation.Collaboration, new shoesJames: Glue test!!!! Card scraper questionsQ&amp;A:Theduck: ??? What is something you find going to get, that is not a tool that you use all the time?Theduc: ??? Is there anything you would like to change about how you got to where you are now...as a creator on or off of YouTube? Creators Photo ChallengeZack: SeanRubino, https://www.instagram.com/p/BhwgdmgAka_/?tagged=creatorsphotochallengePrescriptiontusks, https://www.instagram.com/p/Bhw7t80gOU8/?tagged=creatorsphotochallengeshoutout:  Thewoodenweekends https://www.instagram.com/p/BhutT67AyUN/?tagged=creatorsphotochallengeWill: Barefootfinn https://www.instagram.com/p/BhvSCcHh_nG/?tagged=creatorsphotochallengeThewoodenweekends: https://www.instagram.com/p/BhutT67AyUN/?tagged=creatorsphotochallengeJames: justinlimoges Close up of a saw tooth https://www.instagram.com/p/Bhy0WoWA4Vi/?tagged=creatorsphotochallengeThewoodenweekends Circular saw https://www.instagram.com/p/BhutT67AyUN/?tagged=creatorsphotochallenge Joke of the week What’s new/what are we watching/reading?Will: Nick Offerman captioning New Yorker Cartoons https://www.youtube.com/watch?v=Uf9xpkfJthoJames: Created by Cay Shop made clamp https://www.youtube.com/watch?v=kFmfm5nrGPY&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=2Zack: Favorite tool/product this week?Zack: Proto 90 degree die grinder http://amzn.to/2vYgQq9Will: Makita Circular Saw - https://amzn.to/2HfZsAsJames: Cheap Super glue: https://amzn.to/2vtQ4rJ HostsJames Wright: Wood By Wright https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHgZack Herberholz: ZH Fabrication https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7wWilliam Walker: Wm. Walker Co. https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw SHOW NOTES Intro and outro recorded and produced by Jason Wright http://jason.theyouthman.com/

In episode #76 We talk about Getting shirts, The early results from the glue Test, Shop questions, and pick this weeks winner of the #CreatorsPhotoChallengeHelp us grow on Patreon <a href="https://www.patreon.com/craftedpodcast" rel="nofollow" target="_blank">https://www.patreon.com/craftedpodcast</a>Top Patreons of the week Make Build Modify, Master of None, and Deby Brooke!!<h3>What’s new/ what are we working on?</h3>Zack:Truck, Shirts, The truck into paintWill: Jointer Video, Basement, Walnut Dining Table,Vacation.Collaboration, new shoesJames: Glue test!!!! Card scraper questions<h3>Q&amp;A:</h3>Theduck: ??? What is something you find going to get, that is not a tool that you use all the time?Theduc: ??? Is there anything you would like to change about how you got to where you are now...as a creator on or off of YouTube? <h3>Creators Photo Challenge</h3>Zack: SeanRubino, <a href="https://www.instagram.com/p/BhwgdmgAka_/?tagged=creatorsphotochallenge" rel="nofollow" target="_blank">https://www.instagram.com/p/BhwgdmgAka_/?tagged=creatorsphotochallenge</a>Prescriptiontusks, <a href="https://www.instagram.com/p/Bhw7t80gOU8/?tagged=creatorsphotochallenge" rel="nofollow" target="_blank">https://www.instagram.com/p/Bhw7t80gOU8/?tagged=creatorsphotochallenge</a>shoutout:  Thewoodenweekends <a href="https://www.instagram.com/p/BhutT67AyUN/?tagged=creatorsphotochallenge" rel="nofollow" target="_blank">https://www.instagram.com/p/BhutT67AyUN/?tagged=creatorsphotochallenge</a>Will: Barefootfinn <a href="https://www.instagram.com/p/BhvSCcHh_nG/?tagged=creatorsphotochallenge" rel="nofollow" target="_blank">https://www.instagram.com/p/BhvSCcHh_nG/?tagged=creatorsphotochallenge</a>Thewoodenweekends: <a href="https://www.instagram.com/p/BhutT67AyUN/?tagged=creatorsphotochallenge" rel="nofollow" target="_blank">https://www.instagram.com/p/BhutT67AyUN/?tagged=creatorsphotochallenge</a>James: <a href="https://www.instagram.com/justinlimoges/" rel="nofollow" target="_blank">justinlimoges</a> Close up of a saw tooth <a href="https://www.instagram.com/p/Bhy0WoWA4Vi/?tagged=creatorsphotochallenge" rel="nofollow" target="_blank">https://www.instagram.com/p/Bhy0WoWA4Vi/?tagged=creatorsphotochallenge</a><a href="https://www.instagram.com/thewoodenweekends/" rel="nofollow" target="_blank">Thewoodenweekends</a> Circular saw <a href="https://www.instagram.com/p/BhutT67AyUN/?tagged=creatorsphotochallenge" rel="nofollow" target="_blank">https://www.instagram.com/p/BhutT67AyUN/?tagged=creatorsphotochallenge</a> <h3>Joke of the week</h3> <h3>What’s new/what are we watching/reading?</h3>Will: Nick Offerman captioning New Yorker Cartoons <a href="https://www.youtube.com/watch?v=Uf9xpkfJtho" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=Uf9xpkfJtho</a>James: <a href="https://www.youtube.com/channel/UCvBWLauFCArmRbvBg2o5tVQ" rel="nofollow" target="_blank">Created by Cay</a> Shop made clamp <a href="https://www.youtube.com/watch?v=kFmfm5nrGPY&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=2" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=kFmfm5nrGPY&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=2</a>Zack: <h1>Favorite tool/product this week?</h1>Zack: Proto 90 degree die grinder <a href="http://amzn.to/2vYgQq9" rel="nofollow" target="_blank">http://amzn.to/2vYgQq9</a>Will: Makita Circular Saw - <a href="https://amzn.to/2HfZsAs" rel="nofollow" target="_blank">https://amzn.to/2HfZsAs</a>James: Cheap Super glue: <a href="https://amzn.to/2vtQ4rJ" rel="nofollow" target="_blank">https://amzn.to/2vtQ4rJ</a> <h1>Hosts</h1>James Wright: Wood By Wright <a href="https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg</a>Zack Herberholz: ZH Fabrication <a href="https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w</a>William Walker: Wm. Walker Co. <a href="https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw</a> <h3>SHOW NOTES</h3> Intro and outro recorded and produced by Jason Wright <a href="http://jason.theyouthman.com/" rel="nofollow" target="_blank">http://jason.theyouthman.com/</a>

#76 Early Glue Results and so Much More

We’re on Patreon!Check out our Patreon page here, we have tons of support levels, a weekly After Show, monthly hangouts, and more! Our top patron this week is Make Build Modify, and we'd like to welcome our new patrons: Christopher Pickslay. Thanks for your support!What are we working on?Zack: Cam from instagram, shirt from Breclaimed, New dog, chairs, industrial desk, table design, OvergrippingJohnny: Arts and Crafts Dining Chairs, put out Rustic Bathroom Vanity videoJames: Saw bench and work bench and buying old toolsShow Topic: Shop Safety Zack: Table saw, Router, slivers, blacksmithing…,loose PPE/welding,thumb swinging hammerJohnny: Dust collection, eye protection, respirator, put tools away, reduce clutter, SawStop.James: SLOW DOWN. have respect for tools you know and fear the ones you don’t.Q&amp;A / After Show:Tom Ferone: "I have a small Bernzomatic torch. Uses map and O2. Have not used yet. Nervous about lighting right and shutting it off with out the flame backing into the handle. Any tips Zach?"Joke of the weekScott Curtis: "How do lumberjacks get fired? They get the ax!"What’s new/what are we watching/reading?Johnny: Kyle Toth 100,000, Trustin Timber, OklahomaJames: Wood and ShopZack: dogFavorite tool/product this week?Zack: 9-½ block planeJohnny: Roubo Workbench!James: Saw viceSHOW NOTESJay Bates Push Stick : https://jayscustomcreations.com/2014/03/the-best-push-stick-ever-invented/Want more episodes of the Crafted Podcast? Check out our Show Archives here.Shop Safety, Welding, Woodworking

<h3>We’re on Patreon!</h3>Check out our Patreon page <a href="http://patreon.com/craftedpodcast" rel="nofollow" target="_blank">here</a>, we have tons of support levels, a weekly After Show, monthly hangouts, and more! Our top patron this week is Make Build Modify, and we'd like to welcome our new patrons: Christopher Pickslay. Thanks for your support!<h3>What are we working on?</h3>Zack: Cam from instagram, shirt from Breclaimed, New dog, chairs, industrial desk, table design, OvergrippingJohnny: Arts and Crafts Dining Chairs, put out Rustic Bathroom Vanity videoJames: Saw bench and work bench and buying old tools<h3>Show Topic: Shop Safety</h3> Zack: Table saw, Router, slivers, blacksmithing…,loose PPE/welding,thumb swinging hammerJohnny: Dust collection, eye protection, respirator, put tools away, reduce clutter, SawStop.James: SLOW DOWN. have respect for tools you know and fear the ones you don’t.<h3>Q&amp;A / After Show:</h3>Tom Ferone: "I have a small Bernzomatic torch. Uses map and O2. Have not used yet. Nervous about lighting right and shutting it off with out the flame backing into the handle. Any tips Zach?"<h3>Joke of the week</h3>Scott Curtis: "How do lumberjacks get fired? They get the ax!"<h3>What’s new/what are we watching/reading?</h3>Johnny: <a href="https://www.youtube.com/watch?v=VEVvLRJ1sDI" rel="nofollow" target="_blank">Kyle Toth 100,000</a>, Trustin Timber, OklahomaJames: <a href="https://www.youtube.com/user/WoodAndShop" rel="nofollow" target="_blank">Wood and Shop</a>Zack: dog<h3>Favorite tool/product this week?</h3>Zack: 9-½ block planeJohnny: Roubo Workbench!James: Saw vice<h3>SHOW NOTES</h3>Jay Bates Push Stick : <a href="https://jayscustomcreations.com/2014/03/the-best-push-stick-ever-invented/" rel="nofollow" target="_blank">https://jayscustomcreations.com/2014/03/the-best-push-stick-ever-invented/</a>Want more episodes of the Crafted Podcast? Check out our Show Archives <a href="http://static1.squarespace.com/static/5915dea1a5790a876017ecdc/596e1660176dc407af53a402/596e1685176dc407af53ab02/1500386949468/?format=original" rel="nofollow" target="_blank">here</a>.<a href="https://craftedworkshop.com/crafted-podcast/?tag=Shop+Safety" rel="nofollow" target="_blank">Shop Safety</a>, <a href="https://craftedworkshop.com/crafted-podcast/?tag=Welding" rel="nofollow" target="_blank">Welding</a>, <a href="https://craftedworkshop.com/crafted-podcast/?tag=Woodworking" rel="nofollow" target="_blank">Woodworking</a>

#32: Let's Talk Woodworking & Welding Shop Safety

Figure

In episode #63  we talk about Sharpening methods, water vs window cleaner on diamonds, bending metal back into place, Doing a meet up and more.Help us grow on Patreon https://www.patreon.com/craftedpodcastTop Ptreons of the week Make Build Modify, Master of None, and Deby Brooke!!What’s new/ what are we working on?Zack: Roses, forged lanyards, SculptureWill: maple burl slab,grizzly challenge,live edge vanityJames: Traveling to fredricksburg, New dining room table, new Saw viseQ&amp;A:Sean Foushe: I am curious as to your thoughts about O1, A2, or PM-V11 for a hybrid shop.Yonatan2: Question: Windex is better than water for diamond sharpening plates because it evaporates faster than water so plates don't rust, right? Do you﻿ know of any alternatives for Windex?Yonatan2; Question: How would you bend back a bent jigsaw shoe/base after dropping﻿ it on the ground? I wish I didn't have to ask this! Joke of the weekJoel FägerholtWhat would be the best phone number a woodworker could have? tree tree tree, pine pine pine pineJeff Gruf: What did the beaver say﻿ to the tree? A: It's been nice gnawing you!What’s new/what are we watching/reading?Will: Planet Earth 2James: The Hand tool school https://www.handtoolschool.net/Zack: Walden - Henry David Thoreau - http://amzn.to/2FcX0cyFavorite tool/product this week?Zack: 3M Full Face Respirator - http://amzn.to/2Bs43flWill: Grizzly jointer http://www.grizzly.com/products/8-Jointer-with-Spiral-Cutterhead/G0656XJames: Minivan!Must watch! - Mini Van Highway - https://www.youtube.com/watch?v=2SAFC4_KbW0HostsJames Wright: Wood By Wright https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHgZack Herberholz: ZH Fabrication https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7wWilliam Walker: Wm. Walker Co. https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCwSHOW NOTES Intro and outtro recorded and produced by Jason Wright http://jason.theyouthman.com/

In episode #63  we talk about Sharpening methods, water vs window cleaner on diamonds, bending metal back into place, Doing a meet up and more.Help us grow on Patreon <a href="https://www.patreon.com/craftedpodcast" rel="nofollow" target="_blank">https://www.patreon.com/craftedpodcast</a>Top Ptreons of the week Make Build Modify, Master of None, and Deby Brooke!!<h1>What’s new/ what are we working on?</h1>Zack: Roses, forged lanyards, SculptureWill: maple burl slab,grizzly challenge,live edge vanityJames: Traveling to fredricksburg, New dining room table, new Saw vise<h1>Q&amp;A:</h1>Sean Foushe: I am curious as to your thoughts about O1, A2, or PM-V11 for a hybrid shop.Yonatan2: Question: Windex is better than water for diamond sharpening plates because it evaporates faster than water so plates don't rust, right? Do you﻿ know of any alternatives for Windex?Yonatan2; Question: How would you bend back a bent jigsaw shoe/base after dropping﻿ it on the ground? I wish I didn't have to ask this! <h1>Joke of the week</h1><h1>Joel Fägerholt</h1><h1>What would be the best phone number a woodworker could have? tree tree tree, pine pine pine pine</h1>Jeff Gruf: What did the beaver say﻿ to the tree? A: It's been nice gnawing you!<h1>What’s new/what are we watching/reading?</h1>Will: Planet Earth 2James: The Hand tool school <a href="https://www.handtoolschool.net/" rel="nofollow" target="_blank">https://www.handtoolschool.net/</a>Zack: Walden - Henry David Thoreau - <a href="http://amzn.to/2FcX0cy" rel="nofollow" target="_blank">http://amzn.to/2FcX0cy</a><h1>Favorite tool/product this week?</h1>Zack: 3M Full Face Respirator - <a href="http://amzn.to/2Bs43fl" rel="nofollow" target="_blank">http://amzn.to/2Bs43fl</a>Will: Grizzly jointer <a href="http://www.grizzly.com/products/8-Jointer-with-Spiral-Cutterhead/G0656X" rel="nofollow" target="_blank">http://www.grizzly.com/products/8-Jointer-with-Spiral-Cutterhead/G0656X</a>James: Minivan!<h3>Must watch! - Mini Van Highway - <a href="https://www.youtube.com/watch?v=2SAFC4_KbW0" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=2SAFC4_KbW0</a></h3><h1>Hosts</h1>James Wright: Wood By Wright <a href="https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg</a>Zack Herberholz: ZH Fabrication <a href="https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w</a>William Walker: Wm. Walker Co. <a href="https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw</a><h3>SHOW NOTES</h3> Intro and outtro recorded and produced by Jason Wright <a href="http://jason.theyouthman.com/" rel="nofollow" target="_blank">http://jason.theyouthman.com/</a>

#63 Sharpening, Bending, and Figure 

We’re on Patreon!We've added a $250 goal for weekend show. Tons of support levels, a weekly After Show, monthly hangouts, and more! Our top patrons this week are Make Build Modify, Master of None, and Deby Brooke!Support Us!What’s new/ what are we working on?Zack: Hanging in Chattanooga Johnny: Concrete end table. Published Welding table video.James: French Cleats, running, and more running Show Topic: Digital Fabrication &amp; How It's Changing The WorkshopQ&amp;A:From Ryan Wall:My question is about 3D modeling/CAD programs. Some people use Sketchup and others use Fusion 360. Both are free (fusion is free if you don't make oodles of money) but each are slightly different. I know you all tend to lean towards Sketchup while other makers, especially those with CNC machines, lean towards fusion. What're the pros/cons of each? Joke of the weekQ: How do trees get on the internet?A; They log in!What’s new/what are we watching/reading?Johnny: Lignum, Wooden Lounger Chair James: Tool restorations Pale Dog Tool Co. Zack: Philip Jackson sculptures, http://www.simonstalenhag.se/Favorite tool/product this week?Zack: Pen lightJohnny: Welding TableJames: Countersink bit for the brace!CNC, Digital Fabrication, Woodworking

<h3><a href="http://patreon.com/craftedpodcast" rel="nofollow" target="_blank">We’re on Patreon!</a></h3>We've added a $250 goal for weekend show. Tons of support levels, a weekly After Show, monthly hangouts, and more! Our top patrons this week are Make Build Modify, Master of None, and Deby Brooke!<a href="http://patreon.com/craftedpodcast" rel="nofollow" target="_blank">Support Us!</a><h3>What’s new/ what are we working on?</h3>Zack: Hanging in Chattanooga Johnny: Concrete end table. Published Welding table video.James: French Cleats, running, and more running <h3>Show Topic: Digital Fabrication &amp; How It's Changing The Workshop</h3><h3>Q&amp;A:</h3>From Ryan Wall:My question is about 3D modeling/CAD programs. Some people use Sketchup and others use Fusion 360. Both are free (fusion is free if you don't make oodles of money) but each are slightly different. I know you all tend to lean towards Sketchup while other makers, especially those with CNC machines, lean towards fusion. What're the pros/cons of each? <h3>Joke of the week</h3>Q: How do trees get on the internet?A; They log in!<h3>What’s new/what are we watching/reading?</h3>Johnny: Lignum, Wooden Lounger Chair James: Tool restorations Pale Dog Tool Co. Zack: Philip Jackson sculptures, <a href="http://www.simonstalenhag.se/" rel="nofollow" target="_blank">http://www.simonstalenhag.se/</a><h3>Favorite tool/product this week?</h3>Zack: <a href="http://amzn.to/2eWNAXL" rel="nofollow" target="_blank">Pen light</a>Johnny: <a href="http://bit.ly/weldingtable" rel="nofollow" target="_blank">Welding Table</a>James: Countersink bit for the brace!<a href="https://craftedworkshop.com/crafted-podcast/?tag=CNC" rel="nofollow" target="_blank">CNC</a>, <a href="https://craftedworkshop.com/crafted-podcast/?tag=Digital+Fabrication" rel="nofollow" target="_blank">Digital Fabrication</a>, <a href="https://craftedworkshop.com/crafted-podcast/?tag=Woodworking" rel="nofollow" target="_blank">Woodworking</a>

#46: Digital Fabrication & How It's Changing The Workshop

In episode #61 We have a special guest Shannon Rogers of the HAnd Tool School. We talk about methods of turning, getting a mirror edge on a diamond plate, and different types of strops and stropping compounds.Help us grow on Patreon https://www.patreon.com/craftedpodcastTop Ptreons of the week Make Build Modify, Master of None, and Deby Brooke!!What’s new/ what are we working on?Zack: Taxes, Steel vase for steel roses. truckWill: Bathroom Vanities, live edge marking gauge (https://youtu.be/yRld7c23_ik)James: side table plans and finish https://www.youtube.com/watch?v=uTFB6QwE7o0&amp;list=PLAbayqjimalGAnUtvnwv50DJJBCADJeTLShannon: conditioning shop sawn veneer and fret sawing Turning methods and typeMerion edge on a diamond stone.Types of strops and compoundsJoke of the week I bought a dog from a blacksmith this morning......within 10 minutes of getting him home he made a bolt for the door.What’s new/what are we watching/reading?Will: Travel Feels (https://www.youtube.com/channel/UCbvIIQc5Jo9-jIXnkPe03oA)James: PBS Space time https://www.youtube.com/watch?v=jW55cViXu6sShannon: Ready player one http://amzn.to/2FsZuV0Zack: Stephen King - Night Shift http://amzn.to/2CQfNcXFavorite tool/product this week?Zack: ISOtunes Noise Isolating Bluetooth http://amzn.to/2CQqYCAShannon: Knew concepts Fret saw http://amzn.to/2FsZ80CWill: Hock plane irons (http://amzn.to/2CWB8F5)James: Veritas backsaws https://www.highlandwoodworking.com/veritas-crosscut-carcass-saw.aspx?A=1367&amp;B=28 HostsJames Wright: Wood By Wright https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHgZack Herberholz: ZH Fabrication https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7wWilliam Walker: Wm. Walker Co. https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCwSHOW NOTES Intro and outtro recorded and produced by Jason Wright http://jason.theyouthman.com/

In episode #61 We have a special guest Shannon Rogers of the HAnd Tool School. We talk about methods of turning, getting a mirror edge on a diamond plate, and different types of strops and stropping compounds.Help us grow on Patreon <a href="https://www.patreon.com/craftedpodcast" rel="nofollow" target="_blank">https://www.patreon.com/craftedpodcast</a>Top Ptreons of the week Make Build Modify, Master of None, and Deby Brooke!!<h1>What’s new/ what are we working on?</h1>Zack: Taxes, Steel vase for steel roses. truckWill: Bathroom Vanities, live edge marking gauge (<a href="https://youtu.be/yRld7c23_ik" rel="nofollow" target="_blank">https://youtu.be/yRld7c23_ik</a>)James: side table plans and finish <a href="https://www.youtube.com/watch?v=uTFB6QwE7o0&amp;list=PLAbayqjimalGAnUtvnwv50DJJBCADJeTL" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=uTFB6QwE7o0&amp;list=PLAbayqjimalGAnUtvnwv50DJJBCADJeTL</a>Shannon: conditioning shop sawn veneer and fret sawing Turning methods and typeMerion edge on a diamond stone.Types of strops and compounds<h1>Joke of the week</h1> I bought a dog from a blacksmith this morning......within 10 minutes of getting him home he made a bolt for the door.<h1>What’s new/what are we watching/reading?</h1>Will: Travel Feels (<a href="https://www.youtube.com/channel/UCbvIIQc5Jo9-jIXnkPe03oA" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCbvIIQc5Jo9-jIXnkPe03oA</a>)James: PBS Space time <a href="https://www.youtube.com/watch?v=jW55cViXu6s" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=jW55cViXu6s</a>Shannon: Ready player one <a href="http://amzn.to/2FsZuV0" rel="nofollow" target="_blank">http://amzn.to/2FsZuV0</a>Zack: Stephen King - Night Shift <a href="http://amzn.to/2CQfNcX" rel="nofollow" target="_blank">http://amzn.to/2CQfNcX</a><h1>Favorite tool/product this week?</h1>Zack: ISOtunes Noise Isolating Bluetooth <a href="http://amzn.to/2CQqYCA" rel="nofollow" target="_blank">http://amzn.to/2CQqYCA</a>Shannon: Knew concepts Fret saw <a href="http://amzn.to/2FsZ80C" rel="nofollow" target="_blank">http://amzn.to/2FsZ80C</a>Will: Hock plane irons (<a href="http://amzn.to/2CWB8F5" rel="nofollow" target="_blank">http://amzn.to/2CWB8F5</a>)James: Veritas backsaws <a href="https://www.highlandwoodworking.com/veritas-crosscut-carcass-saw.aspx?A=1367&amp;B=28" rel="nofollow" target="_blank">https://www.highlandwoodworking.com/veritas-crosscut-carcass-saw.aspx?A=1367&amp;B=28</a> <h1>Hosts</h1>James Wright: Wood By Wright <a href="https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg</a>Zack Herberholz: ZH Fabrication <a href="https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w</a>William Walker: Wm. Walker Co. <a href="https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw</a><h3>SHOW NOTES</h3> Intro and outtro recorded and produced by Jason Wright <a href="http://jason.theyouthman.com/" rel="nofollow" target="_blank">http://jason.theyouthman.com/</a>

#61 Turning, Sharpening with diamonds, and types of strops

We’re on Patreon!We've recently added $250 goal for weekend show. We've got tons of support levels, a weekly After Show, monthly hangouts, and more. Top patrons this week are Make Build Modify, Master of None, and Deby Brooke!!Support The Show!What’s new/ what are we working on?Zack: Industrial Shelf, Fabtech, Bushmills Chandelier, TV thing? ,Mail--Blacksmithing--openers, fobs, Leather, Shop-truckJohnny: Dining table, put out slab table videoJames: Saw Till, French Cleats, Spring Pole Lathe, I was on the Modern Woodworkers Association Podcast (Episode 148, Episode 149)Show Topic: Who Inspires Us As Makers? Zack: Richard Proenneke - Alone in the Wilderness, Jimmy Diresta, Marcus AureliusJohnny: Bob Clagett, Making It Podcast, Marc Spagnuolo, Grant BatsonJames: No one source or couple. I find that I am inspired by new locations all the time. Estate sales and auctions, museums, running through the woods.Q&amp;A:Dad Rambles Workshop:Thinking about welding, is a stick a good starter or should I skip straight to MIG? Workshoever welded beforeMike Higgins:Johnny, did you ever put a finish on your Roubo bench?Make Brooklyn:What's a skill or technique that's outside of your comfort zone that some other maker (or other source) has inspired you to learn?Joke of the weekFrom Joel:What program do woodworkers use for cooking? Ketchup.From Bryan:Why can’t you build a chicken coop with 4 doors? It would be a chicken sedan.What’s new/what are we watching/reading?Johnny: KingPost TimberWorks James: Heath Knuckles epoxy Lamp! Zack: Greg Huston Favorite tool/product this week?Zack: KISS drill bit systemJohnny: RespiratorJames: Ripping hand sawCrafted Podcast, Woodworking

<h3>We’re on Patreon!</h3>We've recently added $250 goal for weekend show. We've got tons of support levels, a weekly After Show, monthly hangouts, and more. Top patrons this week are Make Build Modify, Master of None, and Deby Brooke!!<a href="http://patreon.com/craftedpodcast" rel="nofollow" target="_blank">Support The Show!</a><h3>What’s new/ what are we working on?</h3>Zack: Industrial Shelf, Fabtech, Bushmills Chandelier, TV thing? ,Mail--Blacksmithing--openers, fobs, Leather, Shop-truckJohnny: Dining table, put out slab table videoJames: Saw Till, French Cleats, Spring Pole Lathe, I was on the Modern Woodworkers Association Podcast (<a href="http://www.buzzsprout.com/5339/553492-mwa148-james-wright" rel="nofollow" target="_blank">Episode 148</a>, <a href="http://www.buzzsprout.com/5339/556343-mwa149-5-questions-wright" rel="nofollow" target="_blank">Episode 149</a>)<h3>Show Topic: Who Inspires Us As Makers? </h3>Zack: <a href="http://amzn.to/2fuZwjr" rel="nofollow" target="_blank">Richard Proenneke - Alone in the Wilderness</a>, Jimmy Diresta, Marcus AureliusJohnny: Bob Clagett, Making It Podcast, Marc Spagnuolo, Grant BatsonJames: No one source or couple. I find that I am inspired by new locations all the time. Estate sales and auctions, museums, running through the woods.<h3>Q&amp;A:</h3>Dad Rambles Workshop:Thinking about welding, is a stick a good starter or should I skip straight to MIG? Workshoever welded beforeMike Higgins:Johnny, did you ever put a finish on your Roubo bench?Make Brooklyn:What's a skill or technique that's outside of your comfort zone that some other maker (or other source) has inspired you to learn?<h3>Joke of the week</h3>From Joel:What program do woodworkers use for cooking? Ketchup.From Bryan:Why can’t you build a chicken coop with 4 doors? It would be a chicken sedan.<h3>What’s new/what are we watching/reading?</h3>Johnny: KingPost TimberWorks James: Heath Knuckles epoxy Lamp! Zack: Greg Huston <h3>Favorite tool/product this week?</h3>Zack: <a href="http://amzn.to/2xED9AB" rel="nofollow" target="_blank">KISS drill bit system</a>Johnny: <a href="http://amzn.to/2yalW50" rel="nofollow" target="_blank">Respirator</a>James: <a href="http://www.badaxetoolworks.com/D8.php" rel="nofollow" target="_blank">Ripping hand saw</a><a href="https://craftedworkshop.com/crafted-podcast/?tag=Crafted+Podcast" rel="nofollow" target="_blank">Crafted Podcast</a>, <a href="https://craftedworkshop.com/crafted-podcast/?tag=Woodworking" rel="nofollow" target="_blank">Woodworking</a>

#48: Who Inspires Us As Makers?

In episode #97 Comment trolls, Shop Organization, Music inspiration, how to Identify wood And the worst joke of the week yet!Help us grow on Patreon https://www.patreon.com/CreatorsCollectiveHuge thank you to All of our Patreons! Especially Darren Mattes, Caleb Harris of YouCanMakeThisToo and John from John Made ItNew Patreons:You can listen to us on iTunes, Google Play, SoundCloud and many other placesYou can join us live Thursdays at 10 AM eastern on the Creators Collective Podcast https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBgWhat’s new/ what are we working on?Zack: Hammers, VideosWill: Built-ins, Online Store, trying to gauge this finicky storm, 3D printer video https://youtu.be/YyyL_dh8BF8James: Running my head off, stabilizing wood, testing Dovetail guides.Q&amp;A:JW Craftsman: How many times did you rearrange and reorganize your shop before you were actually happy with the layout? After working in the shop for a few months I always think ofYonatan24: How do you get musical creativity vs DIY creativity? Do music ideas pop into your head? Thinking of a song isn't like turning steel into a knife, clever project ideas come from a NEED for a solution. &amp; how do you know you aren't ripping anyone off, ie copying a tune/sing you heard on the radio 2 weeks before...?John Made it: I'm terrible at identifying wood types. how did you guys learn to identify them? is there any good guides to identify different spices of wood?Creators Photo ChallengeDue next time: Free Style (best Photo you can make)Joke of the weekStephen Ellis​: What do you call a jazz fan that uses hand tools? A Sole ManWhat’s new/what are we watching/reading?Will: How to cut thin strips WOOD magazine https://www.youtube.com/watch?v=NZ5Gr7A-xow&amp;t=474sJames: CHop With Chris: https://www.youtube.com/watch?v=ftch0WaaQiE&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=35Zack: Uri Tuchman - https://www.youtube.com/watch?v=u2mWvozSdvEFavorite tool/product this week?Zack: Shinto Wood rasp - https://amzn.to/2xaQf8XWill: ½” Pipe Clamps - https://amzn.to/2p607NCJames: Veritas Custom hand plane: http://www.leevalley.com/US/Wood/CustomPlane.aspxHostsJames Wright: Wood By Wright https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHgZack Herberholz: ZH Fabrication https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7wWilliam Walker: Wm. Walker Co. https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCwSHOW NOTESIntro and outro recorded and produced by Jason Wright http://withamic.com/

In episode #97 Comment trolls, Shop Organization, Music inspiration, how to Identify wood And the worst joke of the week yet!Help us grow on Patreon <a href="https://www.patreon.com/CreatorsCollective" rel="nofollow" target="_blank">https://www.patreon.com/CreatorsCollective</a>Huge thank you to All of our Patreons! Especially Darren Mattes, Caleb Harris of YouCanMakeThisToo and John from John Made ItNew Patreons:You can listen to us on iTunes, Google Play, SoundCloud and many other placesYou can join us live Thursdays at 10 AM eastern on the Creators Collective Podcast <a href="https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBg" rel="nofollow" target="_blank">https://www.youtube.com/channel/UC_0AZEDUA-UWfoSxLil7gBg</a>What’s new/ what are we working on?Zack: Hammers, VideosWill: Built-ins, Online Store, trying to gauge this finicky storm, 3D printer video <a href="https://youtu.be/YyyL_dh8BF8" rel="nofollow" target="_blank">https://youtu.be/YyyL_dh8BF8</a>James: Running my head off, stabilizing wood, testing Dovetail guides.Q&amp;A:JW Craftsman: How many times did you rearrange and reorganize your shop before you were actually happy with the layout? After working in the shop for a few months I always think ofYonatan24: How do you get musical creativity vs DIY creativity? Do music ideas pop into your head? Thinking of a song isn't like turning steel into a knife, clever project ideas come from a NEED for a solution. &amp; how do you know you aren't ripping anyone off, ie copying a tune/sing you heard on the radio 2 weeks before...?John Made it: I'm terrible at identifying wood types. how did you guys learn to identify them? is there any good guides to identify different spices of wood?Creators Photo ChallengeDue next time: Free Style (best Photo you can make)Joke of the weekStephen Ellis​: What do you call a jazz fan that uses hand tools? A Sole ManWhat’s new/what are we watching/reading?Will: How to cut thin strips WOOD magazine <a href="https://www.youtube.com/watch?v=NZ5Gr7A-xow&amp;t=474s" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=NZ5Gr7A-xow&amp;t=474s</a>James: CHop With Chris: <a href="https://www.youtube.com/watch?v=ftch0WaaQiE&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=35" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=ftch0WaaQiE&amp;list=LLbMtJOly6TpO5MQQnNwkCHg&amp;index=35</a>Zack: Uri Tuchman - <a href="https://www.youtube.com/watch?v=u2mWvozSdvE" rel="nofollow" target="_blank">https://www.youtube.com/watch?v=u2mWvozSdvE</a>Favorite tool/product this week?Zack: Shinto Wood rasp - <a href="https://amzn.to/2xaQf8X" rel="nofollow" target="_blank">https://amzn.to/2xaQf8X</a>Will: ½” Pipe Clamps - <a href="https://amzn.to/2p607NC" rel="nofollow" target="_blank">https://amzn.to/2p607NC</a>James: Veritas Custom hand plane: <a href="http://www.leevalley.com/US/Wood/CustomPlane.aspx" rel="nofollow" target="_blank">http://www.leevalley.com/US/Wood/CustomPlane.aspx</a>HostsJames Wright: Wood By Wright <a href="https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCbMtJOly6TpO5MQQnNwkCHg</a>Zack Herberholz: ZH Fabrication <a href="https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCDdZMJDDpyvI9WJyY7IZP7w</a>William Walker: Wm. Walker Co. <a href="https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw" rel="nofollow" target="_blank">https://www.youtube.com/channel/UCievvwx_-UU-rP28103rUCw</a> SHOW NOTESIntro and outro recorded and produced by Jason Wright <a href="http://withamic.com/" rel="nofollow" target="_blank">http://withamic.com/</a>

#97 How To Do Hand Welded Dovetails

The best podcast episodes on non-current politics. Covering topics such as universal basic income, democracy, poverty & justice and more. For anyone interested in learning more about politics that affect that world, not just now, but in the longer term. Add episodes you're interested into your queue below!

Best Non-Current Politics Podcasts

The best philosophy podcast episodes. Asking questions about how to live a better life, what it means to be and do good, to the idea of God. This topic includes episodes that bring about important questions that everyone should be asking themselves. Add episodes you're interested into your queue below!