Anita Cranford's guest appearances

Anita Cranford

Voices from The Bench

Michael Thomas

Pam Johnson

Gary Box

Amanda Wilson

Jonathan Thompson

Adam Herman

Scott James

Mike Clark

Craig Cody

Laura Kelly

Bobby Clark

Dennis Johnson

Wendy Clark

John Wilson

Chris Peterson

OwlTail

Dan Elfring

Elise Holasek

Barb got held up at her lab over the weekend, Elvis is solo on this one.  While at the Eastern Conference of Dental Laboratories Elvis took a break from speaking and recording to bring two conversations he got while at the Whip Mix Digital Forum back in early October. First up is the man, Denture Dan Elfring.  He sits down to talk about his start back in the Air Force, working in a in-office laboratory, and being a SUPER Master CDT.  Then Elvis is joined by the only identical twin laboratory owners Elise Holasek and Anita Cranford, both CDTs, who co-own a lab but their story on how they get into the industry is not a common one. Join us from Whip Mix’s Digital Forum. NEXT UP for Voices From the Bench – Visions 21 -  January 16th – 18th. If you have never been to the meeting get in touch with the NADL to get a special discounted rate. Either by phone at (800) 950-1150 or by email at meetings@nadl.org and tell them you heard about the Vision 21 Meeting from Voices From the Bench and you will get a special rate of almost $200 off the regular attendee price. Are you still doing full arch zirconia restorations?  Why? There is a alternative that is better for your lab, the doctor, and the patients. Be sure to check out the AMAZING Nanoceramic Crystal Ultra®  from Digital Dental. A Crystal Ultra arch is 60% lighter than a Zirconia arch; is easily adjusted chairside; and can be milled on a 1 to 1 basis with no sintering required! Do you want to get into digital dentures? Unsure of how to start? Worried about being FDA compliant? Why not use a already trusted company to be your partner. Whip Mix has put together a system that consists of a validated process using Dentca resins, which are the first FDA-cleared printed denture materials, an Asiga 3D printer and the UViTRON UV curing light.  Using these 3 elements together is fast, easy, and assures the dentist and the patient of a reliably predictable fit.Special Guests: Anita Cranford CDT and Elise Holasek CDT and Dan Elfring CDT.

<p>Barb got held up at her lab over the weekend, Elvis is solo on this one.  While at the Eastern Conference of Dental Laboratories Elvis took a break from speaking and recording to bring two conversations he got while at the Whip Mix Digital Forum back in early October. First up is the man, Denture Dan Elfring.  He sits down to talk about his start back in the Air Force, working in a in-office laboratory, and being a SUPER Master CDT.  Then Elvis is joined by the only identical twin laboratory owners Elise Holasek and Anita Cranford, both CDTs, who co-own a lab but their story on how they get into the industry is not a common one. Join us from Whip Mix’s Digital Forum.</p> <p>NEXT UP for Voices From the Bench – <a href="https://nadl.org/events/v21/2020/" rel="nofollow" target="_blank">Visions 21 -  January 16th – 18th</a>.<br/> If you have never been to the meeting get in touch with the NADL to get a special discounted rate. Either by phone at (800) 950-1150 or by email at <a href="mailto:meetings@nadl.org" rel="nofollow">meetings@nadl.org</a> and tell them you heard about the Vision 21 Meeting from Voices From the Bench and you will get a special rate of almost $200 off the regular attendee price.</p> <h3>Are you still doing full arch zirconia restorations?  Why? There is a alternative that is better for your lab, the doctor, and the patients. Be sure to check out the AMAZING <a href="https://crystalultra.com/voices/" rel="nofollow" target="_blank">Nanoceramic Crystal Ultra® </a> from <a href="https://digitaldental.com/" rel="nofollow" target="_blank">Digital Dental</a>. A Crystal Ultra arch is 60% lighter than a Zirconia arch; is easily adjusted chairside; and can be milled on a 1 to 1 basis with no sintering required!</h3> <h3>Do you want to get into digital dentures? Unsure of how to start? Worried about being FDA compliant? Why not use a already trusted company to be your partner. Whip Mix has put together a system that consists of a validated process using <a href="https://whipmix.com/products/dentca/" rel="nofollow" target="_blank">Dentca resins</a>, which are the first FDA-cleared printed denture materials, an <a href="https://whipmix.com/products/asiga-max/" rel="nofollow" target="_blank">Asiga 3D printer</a> and the <a href="https://whipmix.com/products/uvitron-uv-curing-unit/" rel="nofollow" target="_blank">UViTRON UV curing light</a>.  Using these 3 elements together is fast, easy, and assures the dentist and the patient of a reliably predictable fit.</h3><p>Special Guests: Anita Cranford CDT and Elise Holasek CDT and Dan Elfring CDT.</p>

Episode 85: Denture Dan & The Twins: Dan Elfring, Elise Holasek, and Anita Cranford at the Whip Mix Digital Forum