Tom Senger's guest appearances

Tom Senger

Making Chips Podcast for Manufacturing Leaders

Aneesa Muthana

Chris Fox

Mike Kane

Wayne Breitbarth

Andrew Benson

Michael Dickson

Michael Collins

John Miller

Andrea Olson

John Saunders

Scott McPherson

Justin Sherman

Patricia Miller

Elena Valentine

Lonnie Love

OwlTail

The team at MakingChips knows how important it is for the Metalworking Nation to optimize efficiency and productivity. Having the right tools for the job is at the foundation of a leading manufacturing business. Guest speaker, Tom Senger, gives the run-down on the latest and greatest tools to utilize on the shop floor. Tom is the manager of the Vending, Integration, and Productivity (VIP) program at Zenger’s. Helping customers integrate new operations, realize new levels of productivity, and bring in greater revenue is his specialty. Manufacturing runs in his blood, and he understands what tools to use to get the job done.   Connect with us:www.MakingChips.com/contact   The latest trends in cutting tools can help you make more chips...and more money The tools you use can make or break the impact of your manufacturing business. Hosts Jim Carr and Jason Zenger know you need to be making chips. Being on the cutting edge of cutting tools is imperative to saving money. Tom gives several suggestions for what tools to use for what job and explains that several improvements are being made throughout the manufacturing tool spectrum. Consistency is one of them. Small diameter, multifunctioning drilling tools have seen huge improvements in all-around consistency. It’s no longer the case that you need specialized tools for each part of the job. Not only do multi-functional drilling tools save you a ton of space in your collection storage, but they also get the job done with consistent quality and efficiency. Invest in one tool that can serve multiple functions. Coolant through is the new buzzword Coolant through is being implemented across the tool board. This quality helps reduce wear and tear on your drill bits, improves lubricity, and saves you time and money on maintenance, especially with solid carbide spindles and bits. It also improves consistency. Tom shares about some of the utilization of coolant through on the shop floor. Flat-bottom drills are excellent because they don’t have to be followed up by an end mill. They have replaceable tips and a myriad of products that you can place on the high-speed, coolant through, steel body. The flexibility of this tool enables you to save on carbide costs, and it is incredibly precise with diameters down to a millimeter and a half. Coolant through is also improving the performance of turning and cutting tools, cut-off and groove tools, and milling tools. Fast and high-speed milling tools are seeing smaller diameters, indexable end mills, and dynamic milling processes with the help of CAD CAM software. Different high feed cutters are being utilized to create more corners, even up to 6, 12, and 16 corners with repeatable functions. Turning and cutting tools are being improved with higher feeds and a greater depth of cut. The coolant through allows for less load on the spindle. It’s much the same story with cut-off and groove tools. Tom explains that the coolant through allows for a cooler cutting zone, cutting the cutting time by almost half. Be sure to listen to the full episode for all the details on how and why these improved tools need to become your next investment! Coating, and tolerance improvements As Tom points out, coating is king. Products and tools are no longer simply coated in a layer of tin. Now, there are several layers of different materials being applied for improved performance. Post-treatment coating is especially valuable, coming over the top insert and applying a clear, shining, polished surface. The polish protects and preserves carbide function and strength, improving the shelf-life of the tool up to 25%. Tolerancing is also an obvious ingredient of a great tool. Improved molding technology paired with coolant through enables tools such as the solid carbide spindle coolant drill to function with consistent quality up to a thousand repeatability. Slim the carbide and save on cash Carbide is expensive, and the more you can save on the life of your carbide tools and bits, the better. Solid carbide end mills have been a staple, but Tom explains that many are moving away from solid carbide and choosing steel shanks instead. Different types of end mill heads can be applied to the shank, and many of them have been made smaller for improved performance. Investing in coolant through applications and the right coating can have a huge, positive impact on the shelf-life of your carbide collection, allowing you to work harder, longer, and better without the constant maintenance costs. For more insight into the latest cutting tool trends, be sure to listen to the entire episode! Here’s The Good Stuff!  To make chips you need the right tools. Manufacturing news: exciting award nomination for Carr Machine &amp; Tool, and sales summit for Zenger’s. Tom Senger, manager of Zenger VIP program. The latest and great cutting tool trends. Coolant through, small diameter, multi-functioning drills. The power of the flat-bottom drill. Holding tolerance levels. Yes, the coating does mean everything. High feed milling tools and dynamic processing software. Turning and cutting tool trends. Cut off and groove improvements Shrink fitting tools is the way to go.  Tools &amp; Takeaways  Foxconn Disappointment  This Week’s Superstar Guest: Tom Senger  Tom Senger  Connect With MakingChips  www.MakingChips.com On Facebook On LinkedIn On Instagram On Twitter On YouTube  Subscribe to Making Chips on Apple Podcasts, Google Play, Stitcher, or Spotify

The team at MakingChips knows how important it is for the Metalworking Nation to optimize efficiency and productivity. Having the right tools for the job is at the foundation of a leading manufacturing business. Guest speaker, Tom Senger, gives the run-down on the latest and greatest tools to utilize on the shop floor. Tom is the manager of the Vending, Integration, and Productivity (VIP) program at Zenger’s. Helping customers integrate new operations, realize new levels of productivity, and bring in greater revenue is his specialty. Manufacturing runs in his blood, and he understands what tools to use to get the job done. Connect with us:<a href="http://www.makingchips.com/contact" rel="noopener nofollow" target="_blank">www.MakingChips.com/contact</a>   The latest trends in cutting tools can help you make more chips...and more money The tools you use can make or break the impact of your manufacturing business. Hosts Jim Carr and Jason Zenger know you need to be making chips. Being on the cutting edge of cutting tools is imperative to saving money. Tom gives several suggestions for what tools to use for what job and explains that several improvements are being made throughout the manufacturing tool spectrum. Consistency is one of them. Small diameter, multifunctioning drilling tools have seen huge improvements in all-around consistency. It’s no longer the case that you need specialized tools for each part of the job. Not only do multi-functional drilling tools save you a ton of space in your collection storage, but they also get the job done with consistent quality and efficiency. Invest in one tool that can serve multiple functions. Coolant through is the new buzzword Coolant through is being implemented across the tool board. This quality helps reduce wear and tear on your drill bits, improves lubricity, and saves you time and money on maintenance, especially with solid carbide spindles and bits. It also improves consistency. Tom shares about some of the utilization of coolant through on the shop floor. Flat-bottom drills are excellent because they don’t have to be followed up by an end mill. They have replaceable tips and a myriad of products that you can place on the high-speed, coolant through, steel body. The flexibility of this tool enables you to save on carbide costs, and it is incredibly precise with diameters down to a millimeter and a half. Coolant through is also improving the performance of turning and cutting tools, cut-off and groove tools, and milling tools. Fast and high-speed milling tools are seeing smaller diameters, indexable end mills, and dynamic milling processes with the help of CAD CAM software. Different high feed cutters are being utilized to create more corners, even up to 6, 12, and 16 corners with repeatable functions. Turning and cutting tools are being improved with higher feeds and a greater depth of cut. The coolant through allows for less load on the spindle. It’s much the same story with cut-off and groove tools. Tom explains that the coolant through allows for a cooler cutting zone, cutting the cutting time by almost half. Be sure to listen to the full episode for all the details on how and why these improved tools need to become your next investment! Coating, and tolerance improvements As Tom points out, coating is king. Products and tools are no longer simply coated in a layer of tin. Now, there are several layers of different materials being applied for improved performance. Post-treatment coating is especially valuable, coming over the top insert and applying a clear, shining, polished surface. The polish protects and preserves carbide function and strength, improving the shelf-life of the tool up to 25%. Tolerancing is also an obvious ingredient of a great tool. Improved molding technology paired with coolant through enables tools such as the solid carbide spindle coolant drill to function with consistent quality up to a thousand repeatability. Slim the carbide and save on cash Carbide is expensive, and the more you can save on the life of your carbide tools and bits, the better. Solid carbide end mills have been a staple, but Tom explains that many are moving away from solid carbide and choosing steel shanks instead. Different types of end mill heads can be applied to the shank, and many of them have been made smaller for improved performance. Investing in coolant through applications and the right coating can have a huge, positive impact on the shelf-life of your carbide collection, allowing you to work harder, longer, and better without the constant maintenance costs. For more insight into the latest cutting tool trends, be sure to listen to the entire episode! Here’s The Good Stuff! <ul> <li>To make chips you need the right tools.</li> <li>Manufacturing news: exciting award nomination for Carr Machine &amp; Tool, and sales summit for Zenger’s.</li> <li>Tom Senger, manager of Zenger VIP program.</li> <li>The latest and great cutting tool trends.</li> <li>Coolant through, small diameter, multi-functioning drills.</li> <li>The power of the flat-bottom drill.</li> <li>Holding tolerance levels.</li> <li>Yes, the coating does mean everything.</li> <li>High feed milling tools and dynamic processing software.</li> <li>Turning and cutting tool trends.</li> <li>Cut off and groove improvements</li> <li>Shrink fitting tools is the way to go.</li> </ul> Tools &amp; Takeaways <ul> <li><a href="https://www.bloomberg.com/news/features/2019-02-06/inside-wisconsin-s-disastrous-4-5-billion-deal-with-foxconn" rel="noopener nofollow" target="_blank">Foxconn Disappointment</a></li> </ul> This Week’s Superstar Guest: Tom Senger <ul> <li><a href="https://www.linkedin.com/in/tsenger/" rel="noopener nofollow" target="_blank">Tom Senger</a></li> </ul> Connect With MakingChips <ul> <li><a href="http://www.makingchips.com" rel="noopener nofollow" target="_blank">www.MakingChips.com</a></li> <li>On <a href="https://www.facebook.com/MakingChipsPodcast/" rel="noopener nofollow" target="_blank">Facebook</a></li> <li>On <a href="https://www.linkedin.com/company/makingchips/" rel="noopener nofollow" target="_blank">LinkedIn</a></li> <li>On <a href="https://www.instagram.com/makingchips/" rel="noopener nofollow" target="_blank">Instagram</a></li> <li>On <a href="https://twitter.com/making_chips" rel="noopener nofollow" target="_blank">Twitter</a></li> <li>On <a href="https://www.youtube.com/channel/UCP68uEoZKc_2z2dBjlZ1Vug" rel="noopener nofollow" target="_blank">YouTube</a></li> </ul> Subscribe to Making Chips on <a href="https://itunes.apple.com/us/podcast/makingchips-podcast-jason-zenger-jim-carr-equip-inspire/id953541032?mt=2" rel="noopener nofollow" target="_blank">Apple Podcasts</a>, <a href="https://play.google.com/music/listen?u=0#/ps/Irpegknbfqvhto5epw22dxq7ooe" rel="noopener nofollow" target="_blank">Google Play</a>, <a href="https://www.stitcher.com/podcast/makingchips-equipping-manufacturing-leaders" rel="noopener nofollow" target="_blank">Stitcher</a>, or <a href="https://open.spotify.com/show/3qxN382Adh3WBA3S0Mr978" rel="noopener nofollow" target="_blank">Spotify</a>

The Latest Cutting Tool Trends in Manufacturing with Tom Senger